User Panel
Posted: 8/3/2011 6:23:47 PM EDT
I know a few people wanted me to give them a heads up if another build party were to happen so I'll post this to see if anyone here is interested in a FAL build during late Fall (Oct./Nov.).
|
|
I can get into a FAL.. How much $$ we talking and how far a ride for us LI boys..
|
|
Quoted:
I can get into a FAL.. How much $$ we talking and how far a ride for us LI boys.. $400 - $500 for a parts kit. The $500 parts kits are in excellent condition and come with an original barrel. FAL receivers are $350. I hosted the AK build @ my house and can do so for a FAL build too. Google maps says 5 hours from Manhattan to Springwater. 2 people came from LI for the AK build and liked it enough to want to make the trip back for another build. |
|
5 hours is a trip for sure. Is there a spot to test up there too?
|
|
Quoted:
5 hours is a trip for sure. Is there a spot to test up there too? Within close proximity. |
|
I saw the AK build-wish I could have made it. I wouldn't mind an FAL if the funds are there. Whats a good place to pick up parts kits/receivers? Any group buys? What is needed on my end? I do need a new hunting rifle....they make 5rd FAL mags right? Haha
|
|
Quoted:
I saw the AK build-wish I could have made it. I wouldn't mind an FAL if the funds are there. Whats a good place to pick up parts kits/receivers? Any group buys? What is needed on my end? I do need a new hunting rifle....they make 5rd FAL mags right? Haha If the items were bought as a single order some money could be saved. If you buy 3 or more kits from Sarco they knock $25 off each kit. I can order the receivers in a single order and transfer them in for free so this would save the cost of a FFL transfer fee. Aside from bringing the parts to build the gun with not much else would be needed. I'm ordering the barrel wrench and gauges when I get back from vacation so I should have everything that is needed. |
|
So... Question about the AK builds.
Are you guys getting reciver blanks and making them that way? How does that work with the S/N ect. FAL could be cool too. |
|
Quoted:
So... Question about the AK builds. Are you guys getting reciver blanks and making them that way? How does that work with the S/N ect. FAL could be cool too. For the AK everyone used Nodak Spud receivers. We had around 10 kits being built I believe and we finished at 5:30pm. If we would had bent flats we never would had finished in the same day. FYI, if you ever do decide to build your own AK from a flat you don't need serial numbers on the gun as long as you never sell it. Obviously you can't build an AK with the intention of reselling it as an individual anyways. |
|
End of November would be perfect if you plan on doing it on a weekend. I'm in my weekends now and don't get weekends back until the last 2 weeks in November/all of December. (work schedule)
|
|
Quoted:
End of November would be perfect if you plan on doing it on a weekend. I'm in my weekends now and don't get weekends back until the last 2 weeks in November/all of December. (work schedule) I have nothing going on in Oct/Nov so just about any weekend works for me. If there's definitely interest in a FAL build we can finalize a date in the next couple of weeks. |
|
I would love to own another FAL and would be interested in a build party. I do not have that much build experience and would like to learn. I love in Clifton Park Saratoga county. So are you buying the kits and receivers and transferring them that day? I think that is what I understood from reading.
Freebeer |
|
Quoted:
I would love to own another FAL and would be interested in a build party. I do not have that much build experience and would like to learn. I love in Clifton Park Saratoga county. So are you buying the kits and receivers and transferring them that day? I think that is what I understood from reading. Freebeer Basically once details were finalized we could either purchase kits separate or we could order them as a group and get them for $525 instead of $550 from Sarco. The kits would have to be paid for before I ordered them, if we had 10 people interested I don't want to set on $5500 worth of kits hoping that all 10 people show up an pay for them! Similar thing for the receivers, I can order them and transfer them in for free so this would save $25-35 or whatever your FFL charges for a transfer fee. The FAL build seems pretty straight forward. It should leave us with plenty of time to parkerize them before everyone leaves. |
|
OK I agree. I wouldn't want to be left with that happening to me. Do you have the link to the kits and I think that the receiver would be easier to get from you the day of if that's a option. Sounds like fun and I am already excited even though there is not a day set yet.
Freebeer |
|
Quoted:
OK I agree. I wouldn't want to be left with that happening to me. Do you have the link to the kits and I think that the receiver would be easier to get from you the day of if that's a option. Sounds like fun and I am already excited even though there is not a day set yet. Freebeer Here's a thread I have with other people who are interested, it has the link to the kits and receivers. I'll get the 922(r) info added to that thread tonight when I get home. I'm leaving for the ADK Sunday morning until Thursday or Friday but once I get back I will finalize dates. Once we have a date finalized we can work on the details of doing a group buy on kits/receivers to save money. FAL Build Party Info |
|
looks good I will probably not put a muzzle device on until I get home and give it to my old Fal buddy. He has worked on my and made it absolutely beautiful and i would like him to do the muzzle device welding. If thats ok? Those prices look good and I would love to add a Argentine build to my collection.
Freebeer |
|
Do you have to gave a threaded muzzle on the fal..I would rather not have one on at all..
|
|
I have always wanted a FAL...I'd be interested in a build party!
|
|
Quoted:
Do you have to gave a threaded muzzle on the fal..I would rather not have one on at all.. I'm not sure if the kits have a pressed on or threaded on muzzle device. |
|
Quoted:
I have always wanted a FAL...I'd be interested in a build party! I'll post some dates that work for me once I get back home on Friday and then we can go from there! |
|
Quoted:
Quoted:
I have always wanted a FAL...I'd be interested in a build party! I'll post some dates that work for me once I get back home on Friday and then we can go from there! sounds good! enjoy your trip! |
|
Just want to confirm that there is still interest. If so I"ll work on some dates this weekend.
|
|
Not sure waiting to see the date, what was the deal about you can't build it and then sell it
|
|
Quoted:
Not sure waiting to see the date, what was the deal about you can't build it and then sell it You can't build it with the intention to sell it. |
|
Just read this thread. I'd love to go, assuming I'm available!
Let me address a couple topics I remember being presented: 1. The Sarco kits are Argentine and are basically new. That means they are tight fitting, and have some burrs, etc. They are actually harder to build than from an old beat-up kit because of the tight tolerances. That said, the Sarco kits are pristine and need no refinish work. Some parts may be parkerized and some paint over park. The Sarco kit barrels are threaded. NO muzzle attachment is provided with the kit. You know what this means for NYS. You can chop the threads (ugh!) or go on FAL FIles.com and find a ban-compliant MB which you'll have to drill and pin, then refinish. 2. A great kit to use is an Imbel, they go for about $400 on GB. Carried a lot, shot little. Slap together at its finest. They do exibit a lot of external wear though, so you'll want to blast, park and paint. 3. FALs are hard to 100% "finish" on-site because they use a locking shoulder to headspace. The chance of the one in your kit, if you get one, being correct is about 10%. So typically you'll want a supply of locking shoulder on hand, as well as the guages to see which ones you need. Except for the locking shoulder, FALs slap together like leggos. |
|
Im still down for the build party. I have a butt stock tool also. What are you thinking for dates?
|
|
Quoted:
Im still down for the build party. I have a butt stock tool also. What are you thinking for dates? The beginning of November would work for me. |
|
This guy has three Imbel kits....the best way to get into an FAL build.
http://www.falfiles.com/forums/showthread.php?s=&threadid=315970 |
|
Set a weekend date and ill make sure I have it off and buy the kit. Should I get the receiver sent to a FFL by me or will you buy them and transfer them. I can send funds to you so you don't have to front monies. Can't wait to have another FAL.
|
|
Quoted:
Set a weekend date and ill make sure I have it off and buy the kit. Should I get the receiver sent to a FFL by me or will you buy them and transfer them. I can send funds to you so you don't have to front monies. Can't wait to have another FAL. November 5th would work for me and it shouldn't be too cold, yet! I can order them and transfer them in for free. |
|
Quoted:
Sounds good ill save the date. I'll have a more accurate number as to how many people want to build one by next week. Once I get that I'll get info on order the receivers, etc. |
|
Quoted:
beginning of November works for me too... How many people here would definitely be interested still? I want to do either a FAL or a RPK so I'm trying to decide which kit I'm going to purchase. |
|
I already have a FAL. Would i be able to build a RPK because i think that would be fun to learn a new gun. I am still interested either way.
|
|
Quoted:
I already have a FAL. Would i be able to build a RPK because i think that would be fun to learn a new gun. I am still interested either way. I have a RPK 47 kit that I'm going to be building over the winter. NoDak is suppose to do a run of RPK receivers so I'm waiting on that and hoping more new Romy RPK barrels hit the market again. |
|
OK is this still a go? I am still in. What kit are we ordering?
|
|
Quoted:
OK is this still a go? I am still in. What kit are we ordering? I'm thinking of putting a build off until Spring to see if we can get enough interest in doing one type of build. I have quite a few people interested but people want to do 3-4 different types of builds. |
|
Rich, gimmee an IM when you set something up.
I can probably make it now that I'm closer to your neck of the woods. |
|
Quoted:
Rich, gimmee an IM when you set something up. I can probably make it now that I'm closer to your neck of the woods. I'll start another thread after the first of the year and we can figure out if there is enough interest for a build party. |
|
Where are you guys from? Fal party would be great in the spring.
|
|
Quoted:
Where are you guys from? Fal party would be great in the spring. I'm just south of Rochester. |
|
Im in Clifton Park exit 10 on the northway which is 30 minutes north of albany. I am still a go for a build party and it doesnt matter what build it is.
|
|
Even though I want a FAL, an HK would be awesome! Does anyone know what it would take to build one?
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.