|
Originally Posted By Pleaforwar: @Xhado Thanks again for the recommendation. https://live.staticflickr.com/65535/50677475712_422d844959_h.jpg What made you go with the DO vs the RDS holster? |
|
Originally Posted By WTFShane: What made you go with the DO vs the RDS holster? I didn't really pick one over the other. I have a 6360RDS for my G34, picked this up because it was available at retail and I like having a holster for each gun. |
Luke 2:14
|
Originally Posted By AKSU: Stock recoil springs and all function 100% with 124 NATO, 147 and 147 +P.  https://i.imgur.com/YdcW9Mh.jpg https://i.imgur.com/F6HfEE7.jpg You are not my favorite person. I had no idea I needed a gen 5 G19 with lots of extra stuff. That picture is going to get into my wallet!! |
You can't eat Wheat Thins, John. You're a puppet and nothing is going to change that.
|
Attached File Got the slide back today from ATEi! Now to source some 124gr. |
|
https://www.ssvi.us/products/fenrir-mag-well Possible alternative to the Freya magwell |
|
Originally Posted By Space-Cadet: https://www.ssvi.us/products/fenrir-mag-well Possible alternative to the Freya magwell |
|
Originally Posted By LsuJon: Has a pic of the original Roland or at least a decent quality pic of an actual Roland been seen? Not sure on the actual Roland gun but here is a variant Attached File |
|
Originally Posted By Xhado: What do you mean by "actual Roland"? You mean Chuck Pressburg's personal handgun? |
|
My Faux-Land especial! I like it, runs well, shoots straight, and does the trick. Needs a rezero now that I added the new Zev barrel and Comp. Had the Six Second mount and went to buy a G17. Ended up getting an MOS slide in the box marked as a regular 17. They had already run the check and put the serial number on the transfer so I got to keep it, not a bad score. I'd like to get a different RMR for it as the light totally washes out the current RMR and its pretty dim at night on its own. Attached File |
RIP CPT Mike Medders and SGT Cory Spates
OIF 07-09
Diyala, Iraq
OIF 07-09
Diyala, Iraq
|
Originally Posted By Stonecutter6: My Faux-Land especial! I like it, runs well, shoots straight, and does the trick. Needs a rezero now that I added the new Zev barrel and Comp. Had the Six Second mount and went to buy a G17. Ended up getting an MOS slide in the box marked as a regular 17. They had already run the check and put the serial number on the transfer so I got to keep it, not a bad score. I'd like to get a different RMR for it as the light totally washes out the current RMR and its pretty dim at night on its own. https://www.ar15.com/media/mediaFiles/227502/G17_4_PNG-1780238.JPG You can secure a baby chemlight to the top of the fiber optics on the RMR to cause it to bloom and be easier to see. Ghetto fix but it works |
|
Originally Posted By Zakk_Wylde_470: Mine is going to Battle Werks. Originally Posted By Zakk_Wylde_470: Originally Posted By HeyCoach: Where did y’all send your slide to get the optics cut work done? Mine is going to Battle Werks. Do they do an optic and cut package? |
My offensive line can beat your defensive line.
|
Originally Posted By HeyCoach: Do they do an optic and cut package? Originally Posted By HeyCoach: Originally Posted By Zakk_Wylde_470: Originally Posted By HeyCoach: Where did y’all send your slide to get the optics cut work done? Mine is going to Battle Werks. Do they do an optic and cut package? They might but all their RMRs are out of stock right now. |
When doubt returns, may it be
That faith shall permeate our scars
When we're seduced, then may it be
That we not deviate our cause
That faith shall permeate our scars
When we're seduced, then may it be
That we not deviate our cause
You gotta risk it to get the biscuit
Joined:
Feb 2011
Posts:
8360
EE: 100% (519)
MO, USA
|
Originally Posted By -KentuckyWindage-: It was the final piece of the puzzle... been looking forever for a freya Gen 3 19 Magwell. Originally Posted By -KentuckyWindage-: Originally Posted By LsuJon: Originally Posted By -KentuckyWindage-: All mine, thanks you!!  It was the final piece of the puzzle... been looking forever for a freya Gen 3 19 Magwell. I posted a WTB ad and paid a good bit more than you. Congrats on the puzzle piece |
Just because you're not paranoid, doesn't mean they're not out to get you
|
Originally Posted By -KentuckyWindage-: Well, I finally have something worthy to post in this thread. My Gen 3 Roland Special is complete. Special thanks to @Lucky_Day for making it happen! https://i.imgur.com/7sSd29Y.jpg https://i.imgur.com/0kH86KX.jpg |
|
Originally Posted By -KentuckyWindage-: Well, I finally have something worthy to post in this thread. My Gen 3 Roland Special is complete. Special thanks to @Lucky_Day for making it happen! https://i.imgur.com/7sSd29Y.jpg https://i.imgur.com/0kH86KX.jpg  |
Vodka only corrodes the liver; hope corrodes the soul.
|
I have done quite a bit of research before I even started my build and I am well aware I need 124g or 147g ammo or to change the recoil spring to a different one to run low pressure ammo reliably. So in this time of BS and ammo issues I need help, I have built a g19.5FS Roland Special and I have a small pile of 124G ammo and an even smaller pile of gold dot 124g HP KKM comp and barrel Jagerwerks rmr cut irons forward RMR06 X300ultra Everything else is 100% stock, In order to run the trash ammo I can find what recoil spring would yall suggest I try so as I dont waste resources to see if its reliable? Also What trash ammo have you found that can run in a RS of this kind? My RSA is as shiny as when I got the gun so I actually may run into issues with 124g nato ammo that I have. I finished my build and the damn morons out there started hording ammo just to price gouge us later like we see now as they did with TP and hand sanitizer last year. So what are yall doing in this time of bullshit to keep your roland running now and in the event of full collapse what can I do? I do know here pics required so I really hope the link works  edit ok so the image shows up in preview but clicking the link seems to work yet it doesnt show the image in the post. |
|
@AliasSLH I have run around 200 rounds through mine, all with 115gr. It has ran fairly well, with two FTF's, one being the very first round. I'm shooting 115gr because it's the most readily available ammo right now, and keeping the higher grain stuff for defensive carry. ETA: I'm running a stock spring. |
Luke 2:14
|
Originally Posted By AliasSLH: I have done quite a bit of research before I even started my build and I am well aware I need 124g or 147g ammo or to change the recoil spring to a different one to run low pressure ammo reliably. So in this time of BS and ammo issues I need help, I have built a g19.5FS Roland Special and I have a small pile of 124G ammo and an even smaller pile of gold dot 124g HP KKM comp and barrel Jagerwerks rmr cut irons forward RMR06 X300ultra Everything else is 100% stock, In order to run the trash ammo I can find what recoil spring would yall suggest I try so as I dont waste resources to see if its reliable? Also What trash ammo have you found that can run in a RS of this kind? My RSA is as shiny as when I got the gun so I actually may run into issues with 124g nato ammo that I have. I finished my build and the damn morons out there started hording ammo just to price gouge us later like we see now as they did with TP and hand sanitizer last year. So what are yall doing in this time of bullshit to keep your roland running now and in the event of full collapse what can I do? I do know here pics required so I really hope the link works https://img.mewe.com/api/v2/photo/zlm5GPXT1o0JifpUCsT3qzrfa-Pwh2c_OPV3oNB_epxgDhQcgNkXXDtxnPk/800x800/img?static=0 edit ok so the image shows up in preview but clicking the link seems to work yet it doesnt show the image in the post. My compensated 19.3 works fine with the stock spring and 115gr FMJ. |
This is a placeholder for the Zev OZ9C Fauxland Build I'm doing - waiting on FedEx to deliver my Zev V2 Comp.  On-topic: I have a carry comp setup that performs great. The single port comp directs a ton of flame out the top when shooting dirty Winchester 9mm NATO, which sucks when shooting under NODs, but it's not bad with other ammo. The comp and barrel are from MAC Defense. It uses a proprietary barrel that has no threads. Due to this, the single port comp makes a 19 the exact length as a G17. They make a 3-port comp that makes it slightly shorter than a G34. This setup might be a good option for our brothers in ban states who want to err on the side of caution, as there are no threads and the comp sure as hell doesn't suppress flash.  Attached File Attached File Attached File Attached File |
You gotta risk it to get the biscuit
Joined:
Feb 2011
Posts:
8411
EE: 100% (519)
MO, USA
