Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 8/22/2004 1:16:59 PM EDT
Okay tried posting at Troubleshooting and no response. My bushmaster has developed a problem, the selector switch is stuck in the fire position but the trigger will not release(like it is stuck on safe). I have never had this problem before but have changed two things, put a LMT enhanced bolt on it which I did check the head spacing with a go gauge, and then also changed the pinned CAR stock out for one of the stubby entry model stocks.
Link Posted: 8/22/2004 1:27:20 PM EDT
Link Posted: 8/22/2004 1:34:36 PM EDT
I have the rifle opened and do not see anything that might be holding it up.
Link Posted: 8/22/2004 1:38:39 PM EDT
Link Posted: 8/22/2004 1:56:10 PM EDT
Well it froze up once got it to release, then happened again after two more mags. Okay, so I need to take it apart and get that out of there. I will give it a shot, probably end up at teh gunsmith either way. Thanks for the help guys.
Top Top