Posted: 12/15/2008 4:35:23 PM EDT
|
I gotta haul ass to sight in 2 rifles before work. I got about an hour to do it. I have 2 different rounds in using for each gun. All I got is a 100 yard range to work with and I will be shooting out to 200 yards.
My Hornady 165gr boat tail match custom ammo says at a 100 yards it should be 2" high to be zeroed at 200 yards so I am sighting for that. http://www.midwayusa.com/eproductpage.exe/showproduct?saleitemid=137532 The other round is a 150gr soft point that is 2750 FPS. Where would it be at 50 and a 100 yards relative to my eventual 200 yard shot? I just gotta get this done before this weekend and I don't wanna be all over the place. Thanks in advance guys...I lurk at work and can't post. This is the first time I've posted in over a year. |
|
2" sounds about right for 165 gr hornady, if you have access to a ballistic calculator program, just zero both at 100 then make the adjustments from what the program gives you.
Without knowing the BC and velocities of both I can't give you exact but both should be fairly close to 2" low at 200 and 1/2" high at 50yds for 100 zero. Edited to clarify grammer |
|
Try playing with this
http://www.ballistics-software.com/shoot.htm ETA I used the trial version worked fine |
If it helped