Could You Have Stopped This? Vegas Shooting Analysis with Attorneys on Retainer

[ARCHIVED THREAD] - Delete

Posted: 7/29/2015 1:05:32 PM EDT

Ok for starters I'm re doing my daughters BR since her decorating skills made it virtually impossible to paint over. Im in an older construction 2 story house (1960's) and have it down to the studs. It's a 2nd floor BR and have 3 different types (years) of insulation. I think the oldest is GOLD BOND ROCK WOOL, and 2 different thicknesses of OWENS CORNING fiberglass ,which I assume is fiberglass. My question is do I need to worry about this rock wool stuff?

Posted: 7/29/2015 4:43:18 PM EDT

[#1]

Without seeing it, if you have doubts, get some masks and tear it out and install new. Since you have the walls torn out, just a little more work will be piece of mind.

Posted: 7/29/2015 5:03:30 PM EDT

[#2]

I would wear a 3M- 8511 or similar. A n-95 with exhalation valve. I would try to seal off any wire holes, pipe holes,etc. caulk or foam anywhere you can. If you can afford it go back with spray foam.

[ARCHIVED THREAD] - Delete

Warning

Confirm Action

[ARCHIVED THREAD] - Delete

[ARCHIVED THREAD] - Delete