Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
9/19/2017 7:27:10 PM
Posted: 6/19/2003 1:53:39 PM EDT
[Last Edit: 6/19/2003 4:58:58 PM EDT by Am-O-Tramp]
Here's some pics of Bad Boy in his construction stage, can't get the Imagstation link to work so I'll just post a few picks. This is going to take some time dammit. 1st pic is BAD BOY in his pieces stage. [img]http://www.imagestation.com/picture/sraid65/pda603b471a7a50da3cad40ec5597c792/fbe54580.jpg[/img] BAD BOY getting his shoes welded on. [img]http://www.imagestation.com/picture/sraid65/p38a4d0d1bcf2a6dd7b0a5c87edfbc92b/fbe438c0.jpg[/img] Angle irons will hold 1/2 brick. These were shortened to roughly size of brick [img]http://www.imagestation.com/picture/sraid65/p8d51763f5a94e981c819b04ba136eb61/fbe5309d.jpg[/img] Finished except for wood. BAD BOY is a heavy dude by himself, by adding the brick he really can hold his own against the wind. [img]http://www.imagestation.com/picture/sraid65/p48c728303f97e76851cea84871596d51/fbe5458b.jpg[/img] BAD BOY with brick [img]http://www.imagestation.com/picture/sraid65/p45bdb850465bd28b77f9f11bba3799bf/fbe52ea2.jpg[/img] Top view shows feet [img]http://www.imagestation.com/picture/sraid65/p42f805b77fc671cc765d0d8017b35e8b/fbe52e78.jpg[/img] Notice how tightly the wood fits into BAD BOYS pockets, no slop or movement, a gentle tap shaves the woods corners as it goes in making for a tight fit. [img]http://www.imagestation.com/picture/sraid65/p7aa7691e47573686df7881731201c7c5/fbe52fed.jpg[/img] Here's one I bought, I really wanted something heavier and would hold the wood better, I will use it in the basement this winter for my air rifle shooting. I modified it a bit to make it the way I like. Nice stand considering it's cost and $$$$ shipping charges, BAD BOY ain't no bargin in either catagory. [img]http://www.imagestation.com/picture/sraid65/p0be31438b28a08157396e8a487439e7a/fbe5493d.jpg[/img] Bad Boy wearing cardboard and ready for paint. [img]http://www.imagestation.com/picture/sraid65/pd0cf074dd0fdf8099306991aee55e905/fbe4727b.jpg[/img] Im going to try auto interior type holders to hold the cardboard on, they hold so tight they need to be pushed out of their holes with a dowell rod. [img]http://www.imagestation.com/picture/sraid65/pa9932f612cfc7bed6befa8b1fcefd532/fbe52e4c.jpg[/img] Shop pics Ellis saw [img]http://www.imagestation.com/picture/sraid65/pb967a5c0b6e8c4d882eb94310e2efc75/fbe53206.jpg[/img] Shop Flag, I think it looks great [img]http://www.imagestation.com/picture/sraid65/pb32fb4f49f86eee435aa978cb2f59470/fbe52eb9.jpg[/img] My welders and Hypertherm 600 plasma outfit [img]http://www.imagestation.com/picture/sraid65/p847423051ee13b1f7536e1cf584cf321/fbe54bba.jpg[/img] BAD BOY SAY"S GOOD BYE [img]http://www.imagestation.com/picture/sraid66/pcc7502a5381822434daaf0846e96f6bf/fbe29d72.jpg[/img]
Link Posted: 6/19/2003 1:55:41 PM EDT
You're woefully short of clamps for this project!
Link Posted: 6/19/2003 4:11:27 PM EDT
DriftPunch I have more clamps than what's showing and it's still not enough. Sorry for not responding sooner but I wanted to get all the pics up whilst the mind and spirit was willing and able to take on the back and forth world of posting pics.
Link Posted: 6/19/2003 6:26:34 PM EDT
How much would you charge for each of these? No shipping since I could pick them up. Thanks,
Link Posted: 6/19/2003 6:37:20 PM EDT
Dude where you at in Indiana. I'd like to get one too!
Link Posted: 6/19/2003 6:43:28 PM EDT
That shop is WAY too clean!
Link Posted: 6/19/2003 7:29:49 PM EDT
[Last Edit: 6/19/2003 7:30:29 PM EDT by jrzy]
Nice work ont he stand , you might want to turn the flag around, the stars when hung as you have it should be on the left.
Link Posted: 6/19/2003 8:05:52 PM EDT
Looks like you did a fine job! Most I've seen haven't fit the wood very good either, but then wood dimension seems to be getting smaller too! A two by four isn't really two by four, One by two isn't one by two, etc.
Link Posted: 6/19/2003 10:41:43 PM EDT
ARCHER1122 & jrm theres is a lot of work and steel in Bad Boy compared to other target stands, more than a target stand is probably worth, but I built Bad Boy as a project not caring about cost or profit. If I built BAD BOY's to sell I would have to charge $125 for one, I know I can't sell them for what most people are willing to pay for a target stand, but I know what costs and labor I have in it and have to be fair to myself also. The lighter stand sells for around forty dollars plus shipping costs. I would guess it was built lighter to keep building costs and shipping costs down, I didn't have to worry about those issues when I built BAD BOY. There is also the liability THANG, I have yet to open my business so I'm not insured and I fear lawyers, a lawyer would have no compunction whatsoever taking my house and property even if the shanker knew his client used the product improperly. The dirty MOFO's scare the hell out of me, they really do, they make it hard for a guy to want to help someone. I would like to help you guys out on the price, but you can't buy your tools, material, pay property taxes and insurances, pay utilities and include labor and sell cheap. I've already sunk a lot of money in the shop so far and before winter I have to give the shop a sprayed on insulation job for $3000.00, unfortunately things cost a lot for customers and businesses alike these days. One thing that makes BAD BOY, worth his price is your sons will pass him on to their sons, and If you need/want a steady target for practice, sighting in, or competition he be the one you want. If your still interested in one IM me and I'll check with my POS lawyer and insurance man and see what I can do. Thanks guys
Link Posted: 6/19/2003 11:00:17 PM EDT
Thanks jrzy, tomorrow it will get changed.
Link Posted: 6/19/2003 11:01:41 PM EDT
Very nice craftsmenship.
Link Posted: 6/19/2003 11:37:53 PM EDT
Thanks Corporal_Chaos mornin'everyone.
Link Posted: 6/20/2003 4:31:14 AM EDT
Target stand .. That baby is so tough you could use it for a tackling dummy. Nice job. The shop is sweet and the PLASMA cutter MMMMMMMM
Link Posted: 6/20/2003 4:46:48 AM EDT
nice shop, a-o-t! i saw those uninsulated walls...the indiana location and thought you were one tough cookie! steel buildings get real cold in ohio winters. sweet design on that stand!
Link Posted: 6/20/2003 5:03:13 AM EDT
nice shop
Top Top