Armory Sponsor
Posted: 7/28/2006 12:58:41 AM EDT
|
I have a CA5-10 SBR that is awaiting Form 4 approval at my dealer. In any event, would you please school me on the following: - what factory German semi-auto trigger pack would swap directly into the SW/Coharie Arms lower? - what advantage if any would there be to installing the metal HK pack? - what C&P lower would be better than the SW/CA lower? - which factory HK lower (C&P) would work with an HK metal trigger pack that would fit the SW/CA lower I have? Thanks! |
|
what factory German semi-auto trigger pack would swap directly into the SW/Coharie Arms lower? Optimal would be an MP5 or Hk94, a G3 would wwork but the ejector, hammer and spring are different. - what advantage if any would there be to installing the metal HK pack? Much stronger than the plastic one that you have now - what C&P lower would be better than the SW/CA lower? There are after market ones, robertrtg.com has them. - which factory HK lower (C&P) would work with an HK metal trigger pack that would fit the SW/CA lower I have? see above. Bill |
|
The plastic SEF lowers will work with the metal trigger box but you need a different selector. I think they will also work with the navy lowers but Im not sure. All the "factory German trigger packs" will require a C&P or at least some "fitting" fi you get a SF lower. For whatever reason the real HK semi pack tend to be very pricey, so Id just get a F/A pack and C&P it. |
Armory Sponsor