Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 12/3/2001 12:02:03 PM EST
Alright, i got my SS 10/22 last night and i already ordered an extended mag release. the problem is that when i installed it it was a piece of crap. It sticks and just doesnt look good. Are there any good metal extended mag releases out htere?

Second question: Does anyone know where i can buy or find a ruger factory sling?

Thanks in advance
Link Posted: 12/3/2001 12:08:28 PM EST
Volsquarten makes a nice one for around 15 bucks, it's metal, in either blue or ss.
I'm assuming you got the cheap nylon one?
Go to brownells.com They also have some by power custom, and clark which are nice too.
you can probably get the sling there too, although it's not a very good one.
Link Posted: 12/3/2001 1:25:26 PM EST
1 more question. do i have to buy a rimfire specific scope or will any scope do?
Link Posted: 12/3/2001 1:28:19 PM EST
No, the scope doesn't need to be a 22 specific scope. Mine wears a Bushnell 6x18. You might want to pickup a Weaver rail instead of the standard Ruger rail. I think it is a TO9 Weaver.
Link Posted: 12/3/2001 1:28:49 PM EST
Most scopes will work, however the parallax for most rimfire scopes is set at 50 yards instead of 100.
Link Posted: 12/3/2001 1:31:17 PM EST
OK, thanks. any suggestions on where to get a weaver rail for a good price? and do most come with weaver rings to mount on th rail?
Link Posted: 12/3/2001 1:46:59 PM EST
Just go to Ebay and you can see a bunch of guys selling the weaver rails. Shoot them an email direct and ask them what their best price for a direct, non Ebay sale is. Some guy has rings and a rail listed for sale right now.

Link Posted: 12/3/2001 2:25:02 PM EST
[Last Edit: 12/3/2001 2:17:57 PM EST by jcb9901]
you can also get see threw rings that screw directly to the 10/22 reciever made by weaver.no rail required
Link Posted: 12/3/2001 5:19:51 PM EST
Just curious: how can it not look right? it's a little hangy down tab thingie. Are you totally repulsed by it, or could it be helped with a little clean up work on the edges and a break-in?
What kind of scope did you want? What do you want to shoot at? It's easy to spend more on the scope then you did on the gun. The factory rail cost $5 and is worth about that much. It's fine for a $70 Simmons, but if you are going to spend $150+ on a scope, have someone a high quality mount on the gun for you.
Link Posted: 12/3/2001 6:12:52 PM EST
Just curious: how can it not look right?

Well if he's like me ,I also just pick up a stainless 10/22 with checkerd stock and I wanted a stainless extended mag release or atleast one that looked stainless not blued or black plastic.
Link Posted: 12/3/2001 7:00:19 PM EST
sorry, grammar anality kicking in here

you see THROUGH something. You go THROUGH a tunnel. 'threw' is the past tense of throw, to hurl an object.

Link Posted: 12/3/2001 7:16:04 PM EST

My 10/22 with the Volquartsen trigger assembly 2000 with the extended magazine release.
Link Posted: 12/3/2001 7:22:53 PM EST
Where did you get those rings?

Link Posted: 12/3/2001 7:50:49 PM EST

What's your website again ? Lots of cool pics of AR's with scopes and stuff !
Link Posted: 12/3/2001 8:04:53 PM EST
Cheap 10/22 trick of the day:

Take the gun apart, ignore the manual that tells you not to take any part of the trigger group apart, and pull out that crappy plastic mag release. Then take your original mag release button over to your vice and drill and tap a hole for a machine-type allen key screw (blue or stainless, your choice).

Other option is to drill a hole and use a short length of 1/4" steel or aluminum rod cut to your preferred length, then epoxied in place in the hole.

Don't worry, if you screw up the button drilling the hole, Ruger will send you another one fairly cheap.

Link Posted: 12/3/2001 8:37:52 PM EST
[Last Edit: 12/3/2001 8:31:06 PM EST by TREETOP]
Link Posted: 12/3/2001 9:05:44 PM EST
Anyone got a Bullpup stock for the 10/22 for sale, or know where I can get one cheaper than $80?? Anyone ever used a Bullpup stock on a 10/22? Pros/Cons???

Link Posted: 12/4/2001 6:59:53 PM EST
Uhh Paul, I see what you mean- that is some pretty ugly stuff- unless it works really well, then it's beautiful! That scope mount however looks intriguing. Details?
Link Posted: 12/4/2001 7:03:53 PM EST
Alchemist, did you check out the Brownells catalog?www.brownells.com Got almost anything for the 10/22. I got a Power Custom weaver base for $15.
Link Posted: 12/5/2001 8:41:37 AM EST
Volquartsen now makes the ultimate plinker. they now make their own 22 rifle with a SS reciver that they C&C machine out of a solid block. I have one with a carbon fiber barrel and it is super accurate.
Link Posted: 12/5/2001 9:04:14 AM EST
We have fun with the 10/22.
Link Posted: 12/5/2001 11:21:40 PM EST
Jboze.......You don't EVEN want to mess with the Bullpup stock! Save your money, it's a POS!!! The sights ain't for sh*t, the sight radius is too small, and they are so high above the bore, that when combined with the 22LR's trajectory, means you won't bw able to hit sh*t, except at the exact range you sighted in. Looks ok, but just a pain in the *ss all the way around. Alchemist.......Wally world just might have the Weaver rail you're looking for, but it won't come with any rings.
Top Top