Armory Sponsor
Post your gear pr0n here!! (Page 1 of 50)
Posted: 7/3/2005 9:42:31 AM EDT
|
How come we don't have a thread where people post pictures of their "Johnny-Go-Fast" gear: packs, chest rigs/harnesses, etc? Like the "stud board" over in Lightfighter... although it's mostly R.A.I.D. packs. Let's get it going. |
"There are advantages to a .308 as well, you can shoot bears and refrigerators."
JerodJohnson
"I do have good news though."
"You just saved a bunch of money by switching to Geico?"
"No, TRS is teh ghey."
JerodJohnson
"I do have good news though."
"You just saved a bunch of money by switching to Geico?"
"No, TRS is teh ghey."
I'm waiting to get my gear... 
|
"There are advantages to a .308 as well, you can shoot bears and refrigerators."
JerodJohnson
"I do have good news though."
"You just saved a bunch of money by switching to Geico?"
"No, TRS is teh ghey."
JerodJohnson
"I do have good news though."
"You just saved a bunch of money by switching to Geico?"
"No, TRS is teh ghey."
From Emdom: 2 DA M4 Double Mag Pouch (Coyoteish) 2 Pistol Mag Pouch (Coyoteish) From Kifaru: Marauder Coyote Brown : 1 Add Grommets : 1 Padded with PALS and Power Pull Belt Coyote Brown : 1 Long Pocket Top Zip Coyote Brown : 1 Lock n Load #2 : 1 Lock n Load #7 : 1 From SupplyCaptain: SDS Sandler Hydration Carrier ID VELCRO PANEL ETA 16July05: Just got it yesterday!!!        
|
"There are advantages to a .308 as well, you can shoot bears and refrigerators."
JerodJohnson
JerodJohnson
|
SinistralRifleman: I tried googling for the MOUT Rig I, but the results were inconclusive. I'm really looking for a configuration such as that to hold the shotgun shells. Could you please provide a link if possible or did you loop parts of a bandolier onto the rig. Thanks! -Jason |
Shot Shell Holders are made by 3 Gun Gear and attach to MOLLE/PALS webbing, the 6 shot ones are $15.00 and attach with a MALICE Clip. They are a special order item. www.3gungear.com the MOUT Rig is made by Spec Ops Brand, www.specopsbrand.com I took two chest rigs, attached the battle rig harness to them, and created the Super MOUT vest. |
'Cept that 'ole stinky dead man smelling south african pattern M83 crap sitting in the closet............ I know........... It ain't high speed low drag now.........
That guy must have gotten around, I've got his gear as well..... I consider it second line gear (for me), but I have no doubt that it would continue to serve well if called upon.  |
Stuart Wilson, of Essential Tactical. I might mention that I run customer service for the dude, since he has no concept of what "customer service" really is. He's the stitch bitch, and I handle the rest. Every piece of nylon in those pictures, with the exception of the stuff labeled Camelbak, and the Tactical Tailor X-harness (which was modded to take 2" straps) was made by him. |
|
I'm not *that* tactical. B'out all I got is a SOE 6 mag drop leg pouch, gear belt and a camel back. Maybe I'll pick up some gear at the g/s |
"Me, paranoid? Why should I be paranoid, I've got a gun!"
"The only difference between an ass kisser and a brown noser is depth perception"
"The only difference between an ass kisser and a brown noser is depth perception"
|
I'm shopping for a rig now. I'm thinking of the Eagle Tac V1 Tactical Assault Vest like this one. I was thinking of removing the two side mag pouches, if they get in the way of my duty belt. Has anyone removed the pouches from a vest before? I figure, they're only sew on. I could use the two pouches for loose mag storage or maybe make them removable.  Keep posting photos. I'll get more ideas. Colt_SBR |
<center id=center>
<font color=blue><font size=3> The following people have contributed to this post.
Paris Hilton, Demi Moore, Leslie Nielsen and "Weird Al" Yankovic
</font id=s3></font id=blue>
</center id=center>
<font color=blue><font size=3> The following people have contributed to this post.
Paris Hilton, Demi Moore, Leslie Nielsen and "Weird Al" Yankovic
</font id=s3></font id=blue>
</center id=center>
How do you like the Warlord???? I am debating between the Warlord and the Wee. I'm not going to be able to get armor for the Wee any time soon, so I think I am leaning twords the Warlord now. Do you wear it with a back pack? I have a Camelbak BFM that I would be wearing too and wondered it any of the straps would get in the way of the warload. |
I'm pretty satisfied with the Warlord. The crossed straps at the neck takes a bit of getting used to, but that may be me and my 18inch neck.  No, I don't wear a backpack with it, if I did I would remove the Hydration Carrier (it's all modular) I also have a Multicam "Beez Custom Services" Ballistic Carrier that will accept Plates, should I run across some in the future. |
Here's my new favorite setup in the pattern that shall not be named. My MultiCam and Coyote Boars should be here in the next day or so and I am hoping I can resist the temptation to steal one of each for myself! EssTac Boar w/Bungee Mag Retention, Medic GP Pouch, and Esstac single pistol w and w/o buckle  The rear of the Boar showing the detachable mag back panel and strap attachment points I do need to do a slight mod for the bungee in the far right slot to fit the pistol a bit better. I normally am not a big fan of pistols sitting in chest rigs but the boar wraps around to about the kidney area and the pistol sits vertical and straight down along the leg in the same plane as a vertical hip mounted belt holster. That eliminated my dislike of a pistol over the body. |
Your a big dude like me how does that rig work for you I've been wanting one and all I could talk to was skinny folks  **DISCLAIMER- Not saying ANYONE is FAT or SCRAWNY so keep your underwear un-knotted 
|
Commitment- To fight when others fold, pursue while others retreat, conquer while others quit, and to make right when all else is wrong.
This happy ending is bullsh*t! When does the fairy get laid?
This happy ending is bullsh*t! When does the fairy get laid?
|
Of course I'm not running it at waist level silly! I was merely pointing out that the boar wraps around the body sufficiently enough that my pistol can ride in the outer slot with the bore line down the side of my leg as in a waist mounted holster. The point being that stuffing pistols inside chest rigs usually gives me the willies cause the bore is over or covering the body, which is something I will never get used to. |
It works great, I was kind of wary at first because I had heard all sorts of good things about it but couldn't get my hands on one locally to try out. I broke down and ordered it and couldn't be happier. I reccomend getting the shoulder pads when you order one too, the straps are wide but still start to dig in to your shoulders after having it on for a while. |
|
+1 My other rig is a MC Weesatch and the shoulder pads are a must-have. I would also recommend picking up the new velcro based shoulder straps from Joe @ SKD. They are just the ticket. Easy to adjust and they stay where you put them. They also seem to give the Wee/Wa/Woo a "sturdier" feel up top. |
|
here are mine, Top is a BHI strike omega with various pouches. I am actually selling the vest in the EE right now. I liked it but it was just to restricting and hot. Bottom is my current project. Its a BHI commando recon chest harness. No im not a BHI nut It was either this or the TT 2 piece mav, im still gonna try the mav out as well then sell the one i dont like. Im still waiting on 6 TT mag shingles, maxpedition M4 pouch, maxpedetion rollypolly, nalgene pouch, lightfighter raid pack, knife pouch and camelbak thermobak 3L( that i am either gonna sell or return to lightfighter because i decided to go with a camelbak hawg instead). So far i am extremly happy with the chest rig. And check out the hat i made! Its also got a name tape sewn on the back. Ill post new pics when the chest rig is finished.   
|
|
gazukull- Nice gear. About the CamelBak and canteens. Was your concern just more water (i.e. would another CB have worked) or do you prefer canteens for some reason? I've ditched all of mine except for a single squishy parachutists version for use with a mask. And what vest is that under your Hellcat? TAG Spartan? |
Canteens are easier to fill and are better suited to non-drinking tasks like flushing wounds. |
http://MyWebPages.Comcast.net/Hoplophile/
|
The honest to goodness truth Slimhazy is that I had not heard of Nalgene bottles until recently :D. I got out in 01, so I am kinda behind the times. I just recently got all this stuff and got rid of my trusty LBE. Yepper, that is a TAG spartan, very nice piece of kit! - Gazukull |
My Webspace: BOTD WARNING
http://sinclairvoluptuousspacecaptain.com
http://sinclairvoluptuousspacecaptain.com
|
Gazukull- You can never have too much water. Or ammo, and it looks like your rig is set up well for both. I've got a TAG Spartan on the way to me now. I had been debating it for a while and finally saw one walking out of chow. After checking it out up close I went ahead and placed an order. Seems to be a big improvement over the IBA cover as issued, plus I think I can use it with concealable panels with a few mods. Once I get some stuff moved around on that and my Hellcat I'll have some pics for this thread. 
|
Do you make all of that gear yourself by "cannibalizing" various "parts". I don't mean that to sound derogatory... |
"There are advantages to a .308 as well, you can shoot bears and refrigerators."
JerodJohnson
"You know that Nazi's had pieces of flare, but they made the Jew's wear it."
JerodJohnson
"You know that Nazi's had pieces of flare, but they made the Jew's wear it."
The Super MOUT is two SOB MOUT rigs with a SO Tech Hellcat hydration carrier....had a friend help me sew it all together. I have two other Super MOUT that are green, one is set up for shooting in Trooper Class, the other for Shooting in Tactical Scope. The harnesses on those are from SOB Battle Rigs. I had to go with the SO Tech piece for the coyote one, becuase it was the only thing I could find in a color close enough that did what I needed it to do. My intention for this coyote brown one is to use for training or competitions that I do not need to have shotgun ammo on me like I do for 3 gun. All my vests have the rifle mags and other essential components in the same locations, so I don't need to think about where they are at when switching between them. At the same time, I don't need to hassle with switching around my load outs depending on the event I am going to, just take the one I need. Until recently, I've never really been happy all around with any one rig I had....either not comfortable enough, not fast enough, not secure enough, not enough carrying capacity, or too much. Finally struck the balance with the Super MOUT. I am also liking having a pistol belt/suspenders seperate from the vest itself. It seems to ride better that way, and if I take the vest off, I still have the minimum of what I need on me most of the time. |
 ETA: BFG molle single point sling Camelback hsgi wee lev IV ceramic plates pelican VB3 eagle aIII lolle MC with wmdom WL3 serpa holster g19 MRP |
very interesting, very, very interesting....<img src=/images/smilies/anim_devil.gif border=0 align=middle>
Post your gear pr0n here!! (Page 1 of 50)
Armory Sponsor