Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
BCM
Member Login

Site Notices
Page / 7
Link Posted: 10/14/2012 12:18:17 PM EST
Originally Posted By 0uTkAsT:
Originally Posted By Scuds03:
Originally Posted By KS-Diesel:
I bought mine last month, how long have they been making them with the built in QD sockets in the lower?

http://i62.photobucket.com/albums/h103/Ozman2/06e0d08adba1503f4721b7025e19932f.jpg


They've had the built in QD for 2-3 years now.


Maybe the MOE versions have, but not the standard models. Neither of mine have QD sockets in the lower. One was purchased ~1.5 years ago and the other was just purchased <2 months ago.


Correct, only the MOEs have the QD.
Link Posted: 10/15/2012 12:20:34 PM EST
Originally Posted By Scuds03:
Originally Posted By hi-tech-rancher:
Here's the finished product.  I love the way it came out.  The barrel is 6" and the can is a Silencerco Sparrow.  The rifle shoots incredibly well, its quiet and we had no trouble hitting the 100 and 200 yard hog silhouettes today.  we had to make a shim from the rear of the plastic handguard, because there was a gap left by the TRX having to clamp down in the groove on its proprietary barrel nut.  My gunsmith at LMS Firearms, in Victoria, TX, did an incredible job!

http://i153.photobucket.com/albums/s233/dkred5854/DSCF0005-1.jpg?t=1349066527



You'r front iron sight is mounted backwards


Yes, it is...I thought it looked better that way.  I went and shot it, and had a 0.5" group at 25 yards, so I left, it like a lazy bum....
Link Posted: 10/15/2012 12:24:05 PM EST
Originally Posted By Shooter2384:
Also picked mine up over the weekend

http://i186.photobucket.com/albums/x118/DILLIGAF2384/AR%2015/IMG_0900.jpg



Another FST mounted backwards.  

Seems some of you others like the way it looks
Link Posted: 10/15/2012 7:25:17 PM EST
Dang these are some good looking .22s
Link Posted: 11/30/2012 1:07:35 PM EST
[Last Edit: 12/29/2012 5:30:33 AM EST by GunCat]
Does anyone that has changed out a M&P 15-22 forearm have spare factory barrel nut? I need one for a project gun

TIA

Later -No longer looking for the part, I made a new barrel nut
Link Posted: 12/29/2012 3:50:07 AM EST
[Last Edit: 12/29/2012 4:06:56 AM EST by Whitebrad25]
From the dead bump....I am getting good ideas from this thread and I don't even have mine yet!  It is on the way though!


To those using their real suppressors through them, any issues with end cap strikes, baffle strikes etc?  I am getting a threaded version but I am still thinking about sending it to ADCO to check the concentricity....


I have a suppressor and want to use it on this rifle as a host...

Then again, I think I am going to cut it into an SBR anyways....anyone have info on engraving the poly lower?

Any info on extra/alternative handguards is appreciated as well.  I would like to tuck it under the handguard.
Link Posted: 12/29/2012 8:25:45 AM EST
Forgot about this thread. Finally got my SBR together. New pics coming soon.

Link Posted: 12/29/2012 8:27:00 AM EST
Originally Posted By Whitebrad25:
From the dead bump....I am getting good ideas from this thread and I don't even have mine yet!  It is on the way though!


To those using their real suppressors through them, any issues with end cap strikes, baffle strikes etc?  I am getting a threaded version but I am still thinking about sending it to ADCO to check the concentricity....


I have a suppressor and want to use it on this rifle as a host...

Then again, I think I am going to cut it into an SBR anyways....anyone have info on engraving the poly lower?

Any info on extra/alternative handguards is appreciated as well.  I would like to tuck it under the handguard.


From what I understand the engraving has to be visible. I put mine under the trigger guard, looks good and is not out in plain sight. Ident did mine.
Link Posted: 12/29/2012 8:54:12 AM EST


Pretty stock. I've since added the sights back in conjunction with the ACOG for a 100% cowitness
Link Posted: 12/29/2012 3:18:29 PM EST
Originally Posted By xxspudxx:
Originally Posted By Whitebrad25:
From the dead bump....I am getting good ideas from this thread and I don't even have mine yet!  It is on the way though!


To those using their real suppressors through them, any issues with end cap strikes, baffle strikes etc?  I am getting a threaded version but I am still thinking about sending it to ADCO to check the concentricity....


I have a suppressor and want to use it on this rifle as a host...

Then again, I think I am going to cut it into an SBR anyways....anyone have info on engraving the poly lower?

Any info on extra/alternative handguards is appreciated as well.  I would like to tuck it under the handguard.


From what I understand the engraving has to be visible. I put mine under the trigger guard, looks good and is not out in plain sight. Ident did mine.


Well I know it has to be visible but I was wondering how well the polymer engraves.  Nice to know they can do it well since I would have likely went with them, thanks.
Link Posted: 12/29/2012 4:42:57 PM EST
[Last Edit: 12/29/2012 4:48:09 PM EST by Bloodshot57]
Here's mine with one of the family members


Link Posted: 1/4/2013 7:15:48 PM EST
Here is mine:

M&P 15-22 MOE w/ Primary Arms Microdot, UTG riser, Gemtech Outback II.

Just picked it up Monday, bought it from a guy here on the EE with 4 mags.

Gonna shoot it tomorrow after our USPSA Match.

Link Posted: 1/5/2013 2:45:15 PM EST
Found one the other day at a damn good price ($400), wonder why

Link Posted: 8/5/2013 12:09:21 AM EST
[Last Edit: 8/15/2013 8:01:16 PM EST by huanab]
Here's mine, suppressed with a Spectre II.



Link Posted: 8/5/2013 12:25:19 PM EST
Took my wife out last weekend, the 15-22 gets the most use. I need to get a second one.



Link Posted: 8/7/2013 9:52:09 PM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By xxspudxx:
Took my wife out last weekend, the 15-22 gets the most use. I need to get a second one.

http://i.imgur.com/9OFLgu0l.jpg

http://i.imgur.com/vOn8zETl.jpg
View Quote



Second wife or rifle?
Link Posted: 8/8/2013 10:56:09 AM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By snhar15:



Second wife or rifle?
View Quote View All Quotes
View All Quotes
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By snhar15:
Originally Posted By xxspudxx:
Took my wife out last weekend, the 15-22 gets the most use. I need to get a second one.

http://i.imgur.com/9OFLgu0l.jpg

http://i.imgur.com/vOn8zETl.jpg



Second wife or rifle?


No way I can afford another wife.
Link Posted: 8/12/2013 9:52:27 PM EST
15-22 MOE FDE, TRL1s, Vortex Sparc.
Link Posted: 8/17/2013 10:49:02 AM EST
MORE
Link Posted: 8/18/2013 6:16:03 PM EST
Mine is currently on its way to get cut down to 4.5"
Link Posted: 8/18/2013 10:47:08 PM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By civic96hb:
Mine is currently on its way to get cut down to 4.5"
View Quote


You will not be disappointed.
Link Posted: 8/20/2013 4:16:54 PM EST
[Last Edit: 8/20/2013 4:18:15 PM EST by FOXONE-AZ]
Mine. 10 Inch SBR. 100% reliable.

Link Posted: 8/20/2013 10:53:55 PM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By FOXONE-AZ:
Mine. 10 Inch SBR. 100% reliable.

http://i1078.photobucket.com/albums/w499/Foxonee/SBR-SIDE-2.jpg
View Quote


My second one will be 10. Cant wait.
Link Posted: 8/21/2013 5:45:53 PM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By FOXONE-AZ:
Mine. 10 Inch SBR. 100% reliable.

http://i1078.photobucket.com/albums/w499/Foxonee/SBR-SIDE-2.jpg
View Quote


damn sexy!
Link Posted: 8/22/2013 7:37:06 PM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By xxspudxx:


You will not be disappointed.
View Quote View All Quotes
View All Quotes
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By xxspudxx:
Originally Posted By civic96hb:
Mine is currently on its way to get cut down to 4.5"


You will not be disappointed.

As much money as I've spent on it, I better not be lol
Link Posted: 9/25/2013 11:50:05 AM EST
[Last Edit: 9/25/2013 11:52:00 AM EST by XD45ACP]


Link Posted: 9/25/2013 1:59:46 PM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By XD45ACP:
<a href="http://s191.photobucket.com/user/RugerDuger/media/DSC02467.jpg.html" target="_blank">http://i191.photobucket.com/albums/z137/RugerDuger/DSC02467.jpg</a>

<a href="http://s191.photobucket.com/user/RugerDuger/media/S_W_MP15-22_002.jpg.html" target="_blank">http://i191.photobucket.com/albums/z137/RugerDuger/S_W_MP15-22_002.jpg</a>
View Quote


Sometimes I wish this site had a "like" button! effin sweet!
Link Posted: 10/21/2013 4:39:00 PM EST
Damn I seriously need a 15-22
Link Posted: 10/22/2013 9:57:44 PM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By jukeboxx13:
Damn I seriously need a 15-22
View Quote


Yes. Yes you do.
Link Posted: 11/13/2013 9:13:02 PM EST
Link Posted: 11/13/2013 9:35:56 PM EST
Nice rifle and welcome to Arfcom.
Link Posted: 11/14/2013 9:07:24 PM EST
[Last Edit: 11/15/2013 11:45:00 PM EST by JDangit]
Save my place for the new addition arriving tomorrow!  

BEFORE:





NOW:





Super super excited to take it out!!
Link Posted: 11/15/2013 5:10:48 PM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By xxspudxx:
Nice rifle and welcome to Arfcom.
View Quote

Thanks, I'll end up getting a red dot among other things eventually...
Link Posted: 11/16/2013 11:13:15 AM EST
Is that a fake can ? Does it slip over the barrel?
Link Posted: 12/3/2013 7:04:52 PM EST
Still need to swap out the stock, sights, and maybe add the PA 3X magnifier.


Link Posted: 12/3/2013 11:41:28 PM EST
Link Posted: 12/8/2013 7:44:58 PM EST
First post. Just picked this one up last week. It was at one of the local shops on consignment. I put some new bits on it right away, and have a couple more things coming. I should be seeing a sling, a red dot, and a riser for my UTG bug buster. I really like this thing, it shoots straight and seems to like anything I run through it. It's a great partner to my 10-22. I'll update when the sling and red dot get mounted.
Link Posted: 12/8/2013 7:54:45 PM EST
Welcome to the site! How do you like that Tacticool charging handle? Is the color that far off from Magpul OD green as the photo shows?

Ran across this photo of mine today. Not sure if I have posted it in here yet.

Link Posted: 12/8/2013 8:57:01 PM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By xxspudxx:
Welcome to the site! How do you like that Tacticool charging handle? Is the color that far off from Magpul OD green as the photo shows?

]
View Quote


I do like the Tacticool handle, but the color is quite a bit brighter, for lack of a better term, than the Magpul OD. Here's another shot to give you an  idea. It works great w/ the SWS medium latch.

Link Posted: 12/9/2013 9:02:57 AM EST
Been eyeing one in black. Its about the last bolt on I can do to mine.
Link Posted: 12/24/2013 3:29:03 PM EST
Now these are some really good looking guns! I had no idea they had them in .22. Hmm.... maybe I'll rethink my plans for a customized 10/22 .... In fact, after seeing these, the only reason I'd stay with the 10/22 as a platform is that I found a company that will take my stock 10/22 barrel, and turn it into a full length suppressed barrel, with no "can" on the end; the end result is instead of the tapered barrel of the stock 10/22 it looks like a bull barrel. (well, that and that the 10/22 comes as a take down (folder) config as well as the normal carbine version. But wow, those are some really awesome guns! Do they come in .22 mag also?
Link Posted: 1/2/2014 10:03:46 AM EST
4.5" barrel for SBR build


Link Posted: 1/2/2014 10:46:57 AM EST
You will be very happy with that setup. What can will you be running?

Makes me giggle every time I see it. So tiny, haha.

Link Posted: 1/2/2014 10:56:12 AM EST
haha yea it is. I'll be running the Spectre II
Link Posted: 1/2/2014 12:45:22 PM EST
[Last Edit: 1/20/2015 11:37:27 PM EST by xxspudxx]
Good choice.

That is a killer combo. Everything stays subsonic and cycles like butter. You will need to cut 2 loops off the bolt catch spring to get it to hold open after the last round.
Link Posted: 1/2/2014 1:30:31 PM EST
Hopefully I'll have both stamps in a month or two.
Cool, thanks. I'll look into it
Link Posted: 1/3/2014 12:17:55 AM EST


The Vortex Crossfire II and PEPR mount I ordered from Primary Arms came in today. No, I don't think 4-12x44 is overkill at all.
Link Posted: 1/14/2014 9:27:48 AM EST
My 15-22 SOPMOD Block I

Link Posted: 1/14/2014 9:31:36 AM EST
I dig it!
Link Posted: 1/15/2014 7:55:07 PM EST
Have a couple, but this one is a little harder to come by.

" />
Page / 7
Top Top