Armory Sponsor
AR-15.COM LUNCHBOX SPECIAL LIST (Page 61 of 61)
|
Originally Posted By MNRidesHonda: Finally shot it for the first time this Saturday after making it in the list Christmas 2018  Idk about yours but my LB can shoot for a 16" chrome lined barrel  100m 5 shot groups with: My hand load (Lapua .308 case, Federal GM210M primer, 42.5gr IMR 4064, Sierra Match King 175gr bullet, 2.805" OAL) https://i.imgur.com/mAkQKPj.jpeg And factory FGMM 175gr https://i.imgur.com/mh4pPVy.jpeg No adjustment was made to the optic between those 2 groups. Most excellent! Cheers |
|
nice. |
Donald Trump is President, January 20, 2025. America's path forward will be epic.
|
Originally Posted By M4ger: nice. Originally Posted By M4ger: nice. Thank you, sir. I think it turned out really nice. N.S. Armory put it together for me. |
There are times when only that person staring back at you in the mirror can influence events.
You have my deepest admiration for standing tall when your turn came. Pat_Rogers
#OGPeepsandChug
You have my deepest admiration for standing tall when your turn came. Pat_Rogers
#OGPeepsandChug
|
Originally Posted By Blitz_308: Thank you, sir. I think it turned out really nice. N.S. Armory put it together for me. Originally Posted By Blitz_308: Originally Posted By M4ger: nice. Thank you, sir. I think it turned out really nice. N.S. Armory put it together for me. Quite welcome! Which NF did you install? |
Donald Trump is President, January 20, 2025. America's path forward will be epic.
|
Originally Posted By M4ger: Quite welcome! Which NF did you install? That's the 4-16x42 atacr with T3 reticle. I haven't decided if I'm going to keep it on there or put something else on it, yet. |
There are times when only that person staring back at you in the mirror can influence events.
You have my deepest admiration for standing tall when your turn came. Pat_Rogers
#OGPeepsandChug
You have my deepest admiration for standing tall when your turn came. Pat_Rogers
#OGPeepsandChug
|
Originally Posted By Blitz_308: That's the 4-16x42 atacr with T3 reticle. I haven't decided if I'm going to keep it on there or put something else on it, yet. Originally Posted By Blitz_308: Originally Posted By M4ger: Quite welcome! Which NF did you install? That's the 4-16x42 atacr with T3 reticle. I haven't decided if I'm going to keep it on there or put something else on it, yet. Cool. Thank you. |
Donald Trump is President, January 20, 2025. America's path forward will be epic.
|
Originally Posted By JohnDeereGuy1996: Couple questions. When installing the gas block does it matter if you install the taper pins or the roll pin first? Also is everyone having good luck use the pri barrel nut wrench? My PRI wrench fit like a glove. I used a pin gauge set to figure out what diameter the roll pin hole was to keep the taper pin holes aligned. I don't recall what size it was exactly since I assembled mine 6 months ago. The taper pins installed from the ejection port side to the left. |
Donald Trump is President, January 20, 2025. America's path forward will be epic.
|
Originally Posted By M4ger: My PRI wrench fit like a glove. I used a pin gauge set to figure out what diameter the roll pin hole was to keep the taper pin holes aligned. I don't recall what size it was exactly since I assembled mine 6 months ago. The taper pins installed from the ejection port side to the left. Originally Posted By M4ger: Originally Posted By JohnDeereGuy1996: Couple questions. When installing the gas block does it matter if you install the taper pins or the roll pin first? Also is everyone having good luck use the pri barrel nut wrench? My PRI wrench fit like a glove. I used a pin gauge set to figure out what diameter the roll pin hole was to keep the taper pin holes aligned. I don't recall what size it was exactly since I assembled mine 6 months ago. The taper pins installed from the ejection port side to the left. Did you do the roll pin after the taper? |
|
Originally Posted By JohnDeereGuy1996: Did you do the roll pin after the taper? Originally Posted By JohnDeereGuy1996: Originally Posted By M4ger: Originally Posted By JohnDeereGuy1996: Couple questions. When installing the gas block does it matter if you install the taper pins or the roll pin first? Also is everyone having good luck use the pri barrel nut wrench? My PRI wrench fit like a glove. I used a pin gauge set to figure out what diameter the roll pin hole was to keep the taper pin holes aligned. I don't recall what size it was exactly since I assembled mine 6 months ago. The taper pins installed from the ejection port side to the left. Did you do the roll pin after the taper? Yes. |
Donald Trump is President, January 20, 2025. America's path forward will be epic.
|
Originally Posted By ThatGuy01: Shot my Lunchbox for the first time today (finally). Winchester M80, 100yds with an EOTech and I was still getting ~1" 4rd-5rd groups. I am impressed to put it mildly. The rifle is more accurate than I am. nice! |
Be killing sin or sin will be killing you. -John Owen
AR-15.COM LUNCHBOX SPECIAL LIST (Page 61 of 61)
Armory Sponsor