AR Sponsor
Posted: 8/5/2015 12:13:17 AM EDT
| I'm thinking if doing a build using a v7 upper. Anyone got any suggestions for a lower? |
| I wanted a 2A upper and lower but I'm not as attracted to the setup as I once was. So I want something light but more importantly a perfect fit lower that also matches pattern wise, I don't want it to look mismatch. This in the end might lead me back to the 2A. 2a is awesome and they make some great things. I'm just in the first stages trying to decide I guess on how I'll start my lightweight build. I'm not trying to build the lightest but I want something fully functional and reliable. So that means BUIS, probably an Aimpoint and a sling. Fully functioning is the goal, 6 lbs is the limit. |
|
My rifle is just over 6 pounds with Scout and T1. It's got everything V7 makes, and the lightest variation of everything they make. Carrier is JP LMOS, Gas block SLR 6, barrel BCM enhanced lightweight fluted, rail KMR with all the titanium bits, stock is a gunfighter. Heck the trigger is a Geissele SSAE because it's lighter than stock.
Good luck hitting sub 6 with optic and light with a non 2A receiver set. Mine has the delrin tipped screw to act as an accuwedge so fit is perfect. |
|
Quoted:
My rifle is just over 6 pounds with Scout and T1. It's got everything V7 makes, and the lightest variation of everything they make. Carrier is JP LMOS, Gas block SLR 6, barrel BCM enhanced lightweight fluted, rail KMR with all the titanium bits, stock is a gunfighter. Heck the trigger is a Geissele SSAE because it's lighter than stock. Good luck hitting sub 6 with optic and light with a non 2A receiver set. Mine has the delrin tipped screw to act as an accuwedge so fit is perfect. I did it with a TA33, and an Inova. But I used Mag Tactical receivers. No TI KMR parts, most of the V7 lower get up. And a Ultra Compact stock system. |
AR Sponsor