AR Sponsor
UPDATED: Zero Targets Optimized for Red Dot Style Optics (Aimpoint, EOTech, etc...) AR-15 & AK-47 (Page 6 of 6)
|
Thank you JBP. Much appreciated.
|
|
Originally Posted By mbkintner:
Thanks for the feedback. Anything you could point me towards that would provide some education/guidance on the bold above? I'm looking to do a 50/200 zero on a 25-yard range. Ballistic Chart Notice the 25 yard entry: -1.08" Also notice that unless you are firing M855 out of a 14.5" Barrel with an Absolute Co-Witness Optic - you won't get exactly 200yds for the far zero point. For *THIS* setup, I would place a dot 1.08" (basically 1 inch) below the main aiming point, Fire POA, with the target at 25 yards, and adjust the rounds to impact 1.08" below POA. Here is a snip of that page - note the 25, 50, and 165 yard points. Also note at 200, I am almost 2" low. Real world, probably doesn't matter, but I like knowing the exact data. 
You need your specific data and a calculator if you want specifics, but could probably roll with a 50/200 assumption and be ok. I just bought Strelok Pro because I needed ACSS data - awesome. You could see if Strelok Free gives you what you need. |
|
Originally Posted By mbkintner: Thanks for the feedback. Anything you could point me towards that would provide some education/guidance on the bold above? I'm looking to do a 50/200 zero on a 25-yard range. Simply put: One and a quarter inch low at 25 yards. |
| updated targets location https://rural-geek.net/archive/emergency-preparedness/security/targets/ |
Originally Posted By Oregon Trail: You have died from dysentery.
|
@thecolter383 Could you make one for a 36 yd zero please? I used the 25, but I believe the 36 yd zero will prove more useful for my applications. Sincerest thanks! |
"A fear of weapons is a sign of retarded sexual and emotional maturity" --- Sigmond Freud, General Introduction to Psychoanalysis
|
FYI all targets still available here TARGETS @ BOX |
Originally Posted By Oregon Trail: You have died from dysentery.
|
One neat thing I just noticed about the 50yd AR red dot zero target I had not seen mentioned before: The black outer ring corresponds to 11 moa. That is the width of a standard front sight post on a rifle length sight radius front sight base equipped M16 / AR. The entire paper grid width is 14 moa, which corresponds to the width of the standard front sight post on a carbine length sight radius front sight base equipped M4 / MK18. |
UPDATED: Zero Targets Optimized for Red Dot Style Optics (Aimpoint, EOTech, etc...) AR-15 & AK-47 (Page 6 of 6)
AR Sponsor