[ARCHIVED THREAD] - Timney trigger installation

Posted: 1/27/2014 8:26:11 AM EDT

My Timney trigger did not come with trigger pins. I purchased Brownell's LR-28 trigger pins. Both pins have two groves cut into them, possibly part of a mechanism that holds them in place with a standard trigger assembly. But in the Timney trigger, the holes are smooth; there is nothing to exert any pressure on the pin, so they are not secured. What pins do I need to purchase for my installation?

Thanks!

Posted: 1/27/2014 8:38:16 AM EDT

[#1]

Have you checked with Timney to see if should have come with pins??

Posted: 1/27/2014 8:53:49 AM EDT

[#2]

The stock grooved pins will work fine. The Timney has two setscrews that will "tension" the trigger housing to the lower and prevent pin walk etc. Read your instructions, I think this is covered.
chris

Posted: 1/27/2014 9:00:54 AM EDT

[#3]

Use the standard trigger pins. There are allen wrench screws on the trigger that tension everything up. Check with the installation instructions.

Posted: 1/27/2014 9:05:11 AM EDT

[#4]

RTFM.

[ARCHIVED THREAD] - Timney trigger installation

AR Sponsor

Warning

Confirm Action

[ARCHIVED THREAD] - Timney trigger installation

[ARCHIVED THREAD] - Timney trigger installation