AR Sponsor
So.... what do you build now? (Page 1 of 2)
Posted: 8/14/2026 11:58:48 PM EDT
|
Yes, we're in the Interregnum, things probably won't sort themselves out til the government can't appeal the ruling 60 days from now. But with the decline of the appeal so far, amazingly, it looks like the Can & SBR/SBS/AOW rules may be gone for good. What are you going to buy/build? I have 3 ongoing builds and the planned barrel length just changed on two of em. Cast off 16" carbine gas barrels just got CHEAP. 14.5" clones no longer need to be pinned/welded. Masterkeys don't need a stamp. Cans don't need a stamp. Suppressed Masterkeys on 10.5" suppressed rifles don't need a stamp.  Or do you go through the safe w/ a pipe cutter & make your bullpups 18" OAL car rifles? We've been held hostage by the loud 16" rule for very nearly a century, I'm curious what your safe looks like a year or two from now. |
| Not really anything, because practically everything I have is already an SBR and suppressed, heh. |
Practice, the master of all things. - Augustus
IG: @cqbr.kurdt
Looking for: Savannah Mk18 RIS II in light blonde/bronze - LMT SOPMOD Gen 1 Tan - Aimpoint Comp M3 w/ Lens Covers - G Mk16 10.5" DDC
IG: @cqbr.kurdt
Looking for: Savannah Mk18 RIS II in light blonde/bronze - LMT SOPMOD Gen 1 Tan - Aimpoint Comp M3 w/ Lens Covers - G Mk16 10.5" DDC
Still have nfa in ohio but I have a colt commando lower, colt upper, and 11.5 colt heavy barrel I want make an fbi hrt rifle with. Or maybe just a plain colt commando wit a RAS. Can put a brace on it but I'm not in the mood to build it out after finding out we aren't free here.
|
| Not much, really. I want to do a 6ARC ICAR receiver MK12-ish rifle in tan, finish my Gordy-ish clone, and probably do another 10.3 to go with my 11.5. I only have two 16" rifles left, and one of them is staying that way. The other was planned to be cut to 14.5 anyway so that's not really anything new I've planned. |
TEAM GIMMICK FOREVER
| As soon as it gets straightened out in GA, all my braces will get replaced by stocks. At least three hunting AR’s will get shorter barrels. Several cheap shotguns will get lopped off. Then I’ll start getting serious. I’m hoping some specific barrels will come out already suppressed. |
17 And that no man might buy or sell, save he that had the mark, or the name of the beast, or the number of his name.
| Build a IAR or 9mm colt stick type mag sbr with frt orntrigger kicker |
1(800)kbi 4cat
Montani Semper Libre
Qoute : FCSD - Hold up! I could have tip toed around here with just my hand covering my ass, instead of jamming my thumb in my asshole? Y'all motherfuckers need a user manual or something.
Montani Semper Libre
Qoute : FCSD - Hold up! I could have tip toed around here with just my hand covering my ass, instead of jamming my thumb in my asshole? Y'all motherfuckers need a user manual or something.
Joined:
Aug 2026
Posts:
143
EE: 0% (0)
ZAF
Joined:
Aug 2026
Posts:
144
EE: 0% (0)
ZAF
|
Good morning all. First: Lucky to be a native (ancestors pre-Colonial fur traders) Mainah. This state is a bit schizo mix libtards and normal Americans. Maine is a...um...mostly free state. I too am waiting for the libtard shit-storm that's commin. Second: Humorous film annalogy relating to my just recently assembling a 20" Anderson barrel because it was dirt cheap and wanted to try the brand. Film is 1993 Clint Eastwood "In The Line of Fire." Secret Service Agent haunted by his perceived failure at JFK assination. He grudgingly gets assigned back into high-profile protection duty. He's working with smokin hot Rene Russo. Clint is in his hotel room suiting-up for his shift. Getting all his communication, safety gear, side-arm perfectly fitted and ready for duty. Rene Russo wants to get frisky just after Clint gets his tie perfect and about to leave the room when Rene bats her eye-lashes. Clint lands a perfect line "Oh great. Now I gotta take all this shit off." That's how I'm looking at my newly minted 20" Anderson barreled upper receiver. The 20" barrel I want replaced with a 10.5" barreled suppressed. Been avoiding the entire NFA Stamp deal for decades and daydreamin. Just waiting for all my excusses to be confidently cleared. |
Joined:
Feb 2025
Posts:
130
EE: 100% (42)
ID, USA
|
Originally Posted By Vague: I need another gun like I need another hole in my head. No more SBRs, no more retro. I have rifles I rarely even shoot anymore. I think I'm going to work on parts kits builds from here on out. Maybe it will force me to learn another skill. Right, i feel about the same, don't know if I can stop the retro thogh. |
|
Will put a stock on my braced 11.5. May build a 10.5 Upper. Will be investing in a Surefire Suppressor. I already have the 4 prongs and Warcomps P&W on some 14.5s. Joined the GOA again in case that does matter when the dust settles. I appreciate all of the work the 2A organizations have done to make this happen! |
If U can't Truck It F!@k It!
|
Originally Posted By southerncross: I've got a 5.5" that is one of my favorite guns now. https://www.ar15.com/media/mediaFiles/157261/767-3792075.jpg Originally Posted By southerncross: Originally Posted By gtsteve03: I want a 6.5" 300BO subsonic build. Maybe with a folding stock? I've got a 5.5" that is one of my favorite guns now. https://www.ar15.com/media/mediaFiles/157261/767-3792075.jpg 
|
Joined:
Sep 2025
Posts:
1288
EE: 0% (0)
NV, USA
|
I've got so much that i've gotten to the point where i can't even use "because i want it" as an excuse to myself anymore. So, as of right now, nothing. Originally Posted By Lancelot: Nothing because I still have the NFA in Colorado Also this, but NV. |
Joined:
Jan 2022
Posts:
1514
EE: 0% (0)
USA
USAF (Ret) 2003-2024
Joined:
Oct 2025
Posts:
453
EE: 100% (2)
CO, USA
|
Originally Posted By Teller_Ulam: Keep in mind a lot of states specify NFA stuff is only legal if registered with ATF. NFA registry going away would absolutely screw a bunch of gun owners in those states. "here's a copy of the letter I sent them with photos of the item, and clearly requesting it be registered. if they couldn't be bothered, that isn't my fault." |
| It's interesting, I already have an SKS & a Ruger Mini-14 for ban state travel, so I don't really need a "compliant" AR. A friend sells a lot of 7.5" pistols, but I really think that's likely shorter than useful. I'm thinking 10.5-12.5" is probably what I'll build. |
|
Originally Posted By jaqufrost: I'm probably going to do a belt fed next. I must admit, that's actually something I want to do. I need some flavor of a proper belt-fed. Of course, in the bestest of worlds, I'd get an FA/FRT M249 PARA. But, more within reason, I've been looking at the Lima 6 kit. That, or an HK21 build kit, but those get a lil mo' pricey. |
Practice, the master of all things. - Augustus
IG: @cqbr.kurdt
Looking for: Savannah Mk18 RIS II in light blonde/bronze - LMT SOPMOD Gen 1 Tan - Aimpoint Comp M3 w/ Lens Covers - G Mk16 10.5" DDC
IG: @cqbr.kurdt
Looking for: Savannah Mk18 RIS II in light blonde/bronze - LMT SOPMOD Gen 1 Tan - Aimpoint Comp M3 w/ Lens Covers - G Mk16 10.5" DDC
| Belt fed sounds like an awesome thing to play with, but I really don't have the time to spend with links and all the associated aggravation of keeping a belt fed running, nor do I have the ammo budget to be able use and abuse one like I would prefer. It's the reason I skipped buying a used 911 a few years back. Sure, I can buy one, but can I afford to keep it running and use it like I want? I'm really glad it's an option though, even if it isn't for me. |
TEAM GIMMICK FOREVER
|
Originally Posted By southerncross: Belt fed sounds like an awesome thing to play with, but I really don't have the time to spend with links and all the associated aggravation of keeping a belt fed running, nor do I have the ammo budget to be able use and abuse one like I would prefer. It's the reason I skipped buying a used 911 a few years back. Sure, I can buy one, but can I afford to keep it running and use it like I want? I'm really glad it's an option though, even if it isn't for me. A 249 that I could mag feed w/ an FRT would be awesome, but then I'd want a Humvee underneath it.
|
|
Originally Posted By backbencher: It's interesting, I already have an SKS & a Ruger Mini-14 for ban state travel, so I don't really need a "compliant" AR. A friend sells a lot of 7.5" pistols, but I really think that's likely shorter than useful. I'm thinking 10.5-12.5" is probably what I'll build. See what kak has for labor day Bought a 11.5 mlok chrime kined upper last year with bcg for 250.00 Im debating wait or buy a colt 20" upper for 420 minus bcg and CH |
1(800)kbi 4cat
Montani Semper Libre
Qoute : FCSD - Hold up! I could have tip toed around here with just my hand covering my ass, instead of jamming my thumb in my asshole? Y'all motherfuckers need a user manual or something.
Montani Semper Libre
Qoute : FCSD - Hold up! I could have tip toed around here with just my hand covering my ass, instead of jamming my thumb in my asshole? Y'all motherfuckers need a user manual or something.
Joined:
Nov 2024
Posts:
267
EE: 100% (1)
SC, USA
|
Originally Posted By southerncross:I've got a 5.5" that is one of my favorite guns now. https://www.ar15.com/media/mediaFiles/157261/767-3792075.jpg Oh so sweet. I've got an 8" 300BO and love it. As for any more builds, nah.. I've got all I need including cans. Would be nice if Ohio would allow the NFA crap at state level to go away if the federal stuff goes down the crapper. Then I could actually sell a few cans I no longer have use for. Pipe dream'n..  |
Lord help us all
|
Originally Posted By MackDaddy1962: Oh so sweet. I've got an 8" 300BO and love it. As for any more builds, nah.. I've got all I need including cans. Would be nice if Ohio would allow the NFA crap at state level to go away if the federal stuff goes down the crapper. Then I could actually sell a few cans I no longer have use for. Pipe dream'n.. https://media.fotki.com/2v2ZGz64Fx9T3R.jpg Put em up on GunBroker & only ship to a free state that uses 4473s? |
|
Whose grip is that, please? |
|
Originally Posted By hdcharlie:Whose grip is that, please? Driven Arms ULCG Gen II https://drivenarmsco.com/product/utility-compact-grip-ulcg-gen-2/ You can get them on MK Machining website as well https://www.mkmachining.com/product/utility-compact-grip-gen-2-ulcg-gen-2/ |
Lord help us all
So.... what do you build now? (Page 1 of 2)
AR Sponsor