AR Sponsor
Posted: 8/7/2013 11:45:14 AM EDT
|
So I got a Rdias (Yes its registered) with ALL M16 internals. with the Rdias not installed the gun will dry fire, but when I install the Rdias I can't get the rifle to dry fire. the trigger is really hard and cant be pulled back any ideas?? its in a preban ar15 made by colt. I really don't want to take it somewhere so somebody can charge me an arm and a leg to look at it.
thanks |
|
May want to try here instead
http://www.ar15.com/forums/f_6/23_M_16.html Welcome to AR15.com |
|
Quoted:
So I got a Rdias (Yes its registered) with ALL M16 internals. with the Rdias not installed the gun will dry fire, but when I install the Rdias I can't get the rifle to dry fire. the trigger is really hard and cant be pulled back any ideas?? its in a preban ar15 made by colt. I really don't want to take it somewhere so somebody can charge me an arm and a leg to look at it. You installed a full auto bolt carrier as well, right? If not, the auto sear is catching the hammer like it's supposed to, and the carrier is never releasing it. |
|
Quoted:
so i had a blonde moment... the selector was in the wrong way apparently i have a selector that goes on the right side instead of the left.... Glad you got it figured out. There is no difference between the full and semi auto bolts - just between the bolt carriers, BTW. |
| never mind i was looking at a youtube video about someone installing a dias and it looked different but apparently it was the right way.. i don't know i might have to take it somewhere. everything is correct all m16 parts verified the hammer just wont fall when dias is in place and i cant figure it out. back to the drawing board |
|
Sorry I can't give you anything definitive, but something about the way the sear fits doesn't look right. Are you sure you have a "low shelf" PWA lower? When did you get it?
http://www.ar15.com/archive/topic.html?b=3&f=4&t=195649 Quoted: Without modification, a DIAS will fit: Colt pre-90 (unblocked) Bushmaster Cavalry Arms Essential Arms Sendra Eagle early production Palmetto/SGW/Olympic early production With very slight modification: Olympic Arms later and current production (relieve interior about .015") With more extensive modifications: Colt blocked with pin-in block With somewhat major machining: Colt current production (high shelf) Armalite/Eagle current production (high shelf) Rock River PWA DPMS ASA Century/FAC Hesse (also just about anything else) This thread speaks more about PWA lowers and their compatibility with RDIAS. http://www.ar15.com/forums/t_3_118/280880_andamp__34_low_Shelfandamp__34___and_andamp__34_High_Shelfandamp__34_____.html |
AR Sponsor