AR Sponsor
Official MINI RECCE Photo and Discussion Thread (Page 209 of 222)
|
Passive testing T2 in a 1.93" 45° Badger Ordinance works pretty well for me with a monocular. This is on my Geissele blem 10.5" rail upper and 14.5" Criterion Hybrid barrel. Have a Surefire 300 Vampire, will probably add a Kiji 3° to make myself a poor man's MAWL without a Laser.  
|
|
Attached File Family photo. The middle rifle has been an absolute nightmare to figure out 
|
|
Originally Posted By 135Patriots: https://www.ar15.com/media/mediaFiles/487230/1000009483_jpg-3357146.JPG Family photo. The middle rifle has been an absolute nightmare to figure out What are the details on that upper receiver for the rifle in the top of the picture? (Barrel/handguard length) Thanks! |
|
Originally Posted By 135Patriots: https://www.ar15.com/media/mediaFiles/487230/1000009483_jpg-3357146.JPG Family photo. The middle rifle has been an absolute nightmare to figure out |
|
Originally Posted By Wormydog1987: 12.5" ARP 6.8SPC KAC URX4 AAC SDN6 PA GLx 4-16x 110gr Vmax @ 2547fps 105gr MKZ @ 2602fps 90gr XM68GD @ 2787fps https://i.imgur.com/A4m8lzB_d.webp?maxwidth=1520&fidelity=grand I don't know jack about 6.8spc... But thats a good looking setup. 
|
|
Originally Posted By Wormydog1987: 12.5" ARP 6.8SPC KAC URX4 AAC SDN6 PA GLx 4-16x 110gr Vmax @ 2547fps 105gr MKZ @ 2602fps 90gr XM68GD @ 2787fps https://i.imgur.com/A4m8lzB_d.webp?maxwidth=1520&fidelity=grand @Wormydog1987 Is that a 10” urx4??? Looks shorter than I’d expect a 10.75” to look on a 12.5” barrel. Nice rig! |
|
Originally Posted By 5L33P3R: @Wormydog1987 Is that a 10” urx4??? Looks shorter than I’d expect a 10.75” to look on a 12.5” barrel. Nice rig! It is 10.75", easy enough to count the slots on the side and compare to stock photos. You got me curious so I checked with a cleaning rod and tape measure and the barrel is actually 13”! Crazy |
Be more human
|
Attached File Yea, I guess I should be able to spot a 10.75” urx4 lol |
|
Originally Posted By 5L33P3R: https://www.ar15.com/media/mediaFiles/478727/IMG_1946_jpeg-3362312.JPG Yea, I guess I should be able to spot a 10.75” urx4 lol #lifegoals |
God will not look you over for medals, diplomas, or degrees – but for scars
|
Originally Posted By 5L33P3R: https://www.ar15.com/media/mediaFiles/478727/IMG_1946_jpeg-3362312.JPG Yea, I guess I should be able to spot a 10.75” urx4 lol How do you do fellow KAC handguard enjoyer? 
|
Be more human
|
Originally Posted By Wormydog1987: How do you do fellow KAC handgurd enjoyer? https://i.imgur.com/VgibmAc_d.webp?maxwidth=1520&fidelity=grand very nice! hopefully this weekend i'll finalize a deal on a 14.5" urx4 and 10" urx4 to finish out the collection lol |
|
Originally Posted By Wormydog1987: How do you do fellow KAC handgurd enjoyer? https://i.imgur.com/VgibmAc_d.webp?maxwidth=1520&fidelity=grand KAC rails 4 life! 
|
|
@Eyekahn "blacked out" 300BLK looks great! |
|
Originally Posted By 5L33P3R: very nice! hopefully this weekend i'll finalize a deal on a 14.5" urx4 and 10" urx4 to finish out the collection lol 14.5 Attached File 10.0 Attached File |
|
Ah heck, while I'm at it... Here's a 12.5" 556 with urx4 10.75 and a delta stryker 1-6x Attached File 14.5 556 urx4 13 with nx8 Attached File 14.5" pinned 556 urx3.1 13.5 with pa 2.5-10x Attached File Attached File |
|
Quick question... Does an elcan qualify for mini recce status? 12.5" 308 POF rogue w/ 10.75 urx3.1 elcan 1/4x Attached File I would definitely take this bad boy on a recce mission! |
|
Attached File Originally Posted By Daggertt: Quick question... Does an elcan qualify for mini recce status? 12.5" 308 POF rogue w/ 10.75 urx3.1 elcan 1/4x https://www.ar15.com/media/mediaFiles/435611/20241030_185046_jpg-3362938.JPG I would definitely take this bad boy on a recce mission! Attached File |
|
Originally Posted By Daggertt: Quick question... Does an elcan qualify for mini recce status? 12.5" 308 POF rogue w/ 10.75 urx3.1 elcan 1/4x https://www.ar15.com/media/mediaFiles/435611/20241030_185046_jpg-3362938.JPG I would definitely take this bad boy on a recce mission! The fireball and concussion coming off of that thing must be intense. |
God will not look you over for medals, diplomas, or degrees – but for scars
|
Originally Posted By Daggertt: Quick question... Does an elcan qualify for mini recce status? 12.5" 308 POF rogue w/ 10.75 urx3.1 elcan 1/4x https://www.ar15.com/media/mediaFiles/435611/20241030_185046_jpg-3362938.JPG I would definitely take this bad boy on a recce mission! I need a paint job tutorial |
|
Originally Posted By huntsimp87: I need a paint job tutorial Originally Posted By huntsimp87: Originally Posted By Daggertt: Quick question... Does an elcan qualify for mini recce status? 12.5" 308 POF rogue w/ 10.75 urx3.1 elcan 1/4x https://www.ar15.com/media/mediaFiles/435611/20241030_185046_jpg-3362938.JPG I would definitely take this bad boy on a recce mission! I need a paint job tutorial Tape off necessary items Gather paint Have a few brews Spray Admire paint job |
God will not look you over for medals, diplomas, or degrees – but for scars
|
Originally Posted By Daggertt: Quick question... Does an elcan qualify for mini recce status? 12.5" 308 POF rogue w/ 10.75 urx3.1 elcan 1/4x https://www.ar15.com/media/mediaFiles/435611/20241030_185046_jpg-3362938.JPG I would definitely take this bad boy on a recce mission! |
"the science" /duh si-ens/ noun: progressive postmodern religious dogma not based in tested hypothesis or facts used to advance an authoritative political ideology
|
Originally Posted By trapsh00ter99: What thermal is that? Originally Posted By trapsh00ter99: Originally Posted By Daggertt: Quick question... Does an elcan qualify for mini recce status? 12.5" 308 POF rogue w/ 10.75 urx3.1 elcan 1/4x https://www.ar15.com/media/mediaFiles/435611/20241030_185046_jpg-3362938.JPG I would definitely take this bad boy on a recce mission! |
|
Originally Posted By bzugger: 384 or 640? If it's the 384...how do you like it? I have a 640 handheld spotter. It's nice. But this works out to a couple hundred yards probably. I haven't really pushed it out past 100 yet anyway. Eventually I'll get something like the RH25 but I'll keep this as a redundancy. Something i like about it is that you can switch the rear lens and have a 1x standalone. Attached File I can only use it with up to about 6x so i consider it a companion to my PVS24. Attached File |
Joined:
Mar 2022
Posts:
887
EE: 100% (71)
KS, USA
|
Originally Posted By Daggertt: Quick question... Does an elcan qualify for mini recce status? 12.5" 308 POF rogue w/ 10.75 urx3.1 elcan 1/4x https://www.ar15.com/media/mediaFiles/435611/20241030_185046_jpg-3362938.JPG I would definitely take this bad boy on a recce mission! How do you like that riflespeed gas block? I've been looking at them hard lately. |
|
Originally Posted By broy_jenkins: How do you like that riflespeed gas block? I've been looking at them hard lately. RS is the cleanest way to accomplish that from what i can tell. You can see on some of the other mini recce rifles i posted above i have several of them. On a 16" rifle gas setup i need to try a different plunger because max gas isn't enough on the standard plunger. But it comes with a couple plungers. I used paint marker to mark "suppressed" and "unsuppressed" si i don't have to try to remember for each gun. It's a straightforward concept that's well executed. If you want ADJUSTABLE gas, not just "dialed in one time" gas, then this is one of the best solutions on the market. |
Joined:
Mar 2022
Posts:
888
EE: 100% (71)
KS, USA
|
Originally Posted By Daggertt: If you want to suppress a 308 you really need to have a suppressed and an unsuppressed setting m RS is the cleanest way to accomplish that from what i can tell. You can see on some of the other mini recce rifles i posted above i have several of them. On a 16" rifle gas setup i need to try a different plunger because max gas isn't enough on the standard plunger. But it comes with a couple plungers. I used paint marker to mark "suppressed" and "unsuppressed" si i don't have to try to remember for each gun. It's a straightforward concept that's well executed. If you want ADJUSTABLE gas, not just "dialed in one time" gas, then this is one of the best solutions on the market. Originally Posted By Daggertt: Originally Posted By broy_jenkins: How do you like that riflespeed gas block? I've been looking at them hard lately. RS is the cleanest way to accomplish that from what i can tell. You can see on some of the other mini recce rifles i posted above i have several of them. On a 16" rifle gas setup i need to try a different plunger because max gas isn't enough on the standard plunger. But it comes with a couple plungers. I used paint marker to mark "suppressed" and "unsuppressed" si i don't have to try to remember for each gun. It's a straightforward concept that's well executed. If you want ADJUSTABLE gas, not just "dialed in one time" gas, then this is one of the best solutions on the market. I went with an SLR Sentry on my 12.5 .308 several years ago (I tend to use them on a lot of builds, especially non-5.56). I didn't know about RS at the time. I had it pinned to the barrel and had the port opened up that way I would have a larger range of gas settings to play with. I liked it for the same reasons you mentioned, like having defined detent settings not just a set screw. It just isn't as intuitive to know what setting you are on (basically have to remember number of clicks out from "closed") nor is it as easy to adjust when it is tucked under the handguard like I have it. |
|
Originally Posted By broy_jenkins: I went with an SLR Sentry on my 12.5 .308 several years ago (I tend to use them on a lot of builds, especially non-5.56). I didn't know about RS at the time. I had it pinned to the barrel and had the port opened up that way I would have a larger range of gas settings to play with. I liked it for the same reasons you mentioned, like having defined detent settings not just a set screw. It just isn't as intuitive to know what setting you are on (basically have to remember number of clicks out from "closed") nor is it as easy to adjust when it is tucked under the handguard like I have it. But yeah basically what you mentioned is what they bring to the table. I'm not thrilled about the price but they seem to sell everything they make and are constantly restocking. So the price must be low enough for the quantity demanded. |
|
Originally Posted By Daggertt: Agm rattler tc35 Pic thread Attached File Attached File 3rds at 275 yards today with IMI 77. Steel is 12" wide for reference. Attached File |
"the science" /duh si-ens/ noun: progressive postmodern religious dogma not based in tested hypothesis or facts used to advance an authoritative political ideology
|
Originally Posted By trapsh00ter99: Thanks! I was surprised how compact it looked, then realized it was on a large frame so made it look smaller. Pic thread https://www.ar15.com/media/mediaFiles/184365/IMG_9866_jpeg-3367359.JPG https://www.ar15.com/media/mediaFiles/184365/IMG_9868_jpeg-3367361.JPG 3rds at 275 yards today with IMI 77. Steel is 12" wide for reference. https://www.ar15.com/media/mediaFiles/184365/IMG_9869_jpeg-3367362.JPG Here are 2 POF Rogues next to a scar 17, 2 556 guns and a large frame 308. Attached File The Rogues use a 556 size bcg, AR15 handguards, and an AR15 upper can pin onto the Rogue lower. ie. the pin spacing and dimensions are the same. The guns also weigh the same as an AR15. Attached File I am out of the country again so i can't take a new pic with the AGM on a 556 gun, but I'm telling you it's pretty similar. |
|
Originally Posted By Daggertt: Its a POF rogue... Not a large frame. Here are 2 POF Rogues next to a scar 17, 2 556 guns and a large frame 308. https://www.ar15.com/media/mediaFiles/435611/20241104_061559_jpg-3367589.JPG The Rogues use a 556 size bcg, AR15 handguards, and an AR15 upper can pin onto the Rogue lower. ie. the pin spacing and dimensions are the same. The guns also weigh the same as an AR15. https://www.ar15.com/media/mediaFiles/435611/20241104_061115_jpg-3367598.JPG I am out of the country again so i can't take a new pic with the AGM on a 556 gun, but I'm telling you it's pretty similar. |
"the science" /duh si-ens/ noun: progressive postmodern religious dogma not based in tested hypothesis or facts used to advance an authoritative political ideology
|
Originally Posted By MikeGolf13: Chopped RISII Bcm upper DD lower Vseven 12.5 Griffen explorer Edit* GL/SSC “build” https://i.imgur.com/By1TMcS.jpg Who did the chop? I still want to do this with a cob and razor. I just never go through with it. |
|
Originally Posted By MikeGolf13: Chopped RISII Bcm upper DD lower Vseven 12.5 Griffen explorer Edit* GL/SSC “build” https://i.imgur.com/By1TMcS.jpg How do you like the v seven barrel? Don't see many of them around and as per most of their stuff, the price is way up there. If it's anything like their other products I'd imagine the quality is excellent. |
|
Originally Posted By Eyekahn: Who did the chop? I still want to do this with a cob and razor. I just never go through with it. Chopboss. I’ve had a lot of variations of mini recce but so far this is my absolute favorite. I was running it with a TA02 and 403r but my older eyes like the LPVO |
|
Originally Posted By 135Patriots: How do you like the v seven barrel? Don't see many of them around and as per most of their stuff, the price is way up there. If it's anything like their other products I'd imagine the quality is excellent. Incredibly impressed. Beat out my noveske SS in groups and was only about 50fps slower with the 75s I mostly shoot. Gassing is perfect even with a can and carbine length. Currently only H1 buffer and tubbs spring. Shoots everything well and something’s great. Puts AAC 75 in a very small group. I’ll be buying another to stock V7 group aac75 |
|
What's going on with the doodad at the 1 o'clock rear of the URX4? |
|
Originally Posted By NemesisMind: What's going on with the doodad at the 1 o'clock rear of the URX4? Just a tether cable thingy https://www.m4gunslinger.com/shop/p/siap-sensitive-item-anchor-point-system?utm_medium=email&utm_source=customer_notification |
IG: jsm5092
https://youtube.com/@justsomedude556
https://youtube.com/@justsomedude556
|
Originally Posted By Maack: Just a tether cable thingy https://www.m4gunslinger.com/shop/p/siap-sensitive-item-anchor-point-system?utm_medium=email&utm_source=customer_notification Originally Posted By Maack: Originally Posted By NemesisMind: What's going on with the doodad at the 1 o'clock rear of the URX4? Just a tether cable thingy https://www.m4gunslinger.com/shop/p/siap-sensitive-item-anchor-point-system?utm_medium=email&utm_source=customer_notification Interesting |
God will not look you over for medals, diplomas, or degrees – but for scars
|
Originally Posted By Maack: It’s mainly for lasers and lights, but I’m using it for optics. Chances are low, but I’m just trying it out. Originally Posted By Maack: Originally Posted By SecretSquirell: Interesting It’s mainly for lasers and lights, but I’m using it for optics. Chances are low, but I’m just trying it out. Oh, I'm well aware of dummy cords. Just nothing that slick. Had a few armorers that used SS wire and would leave the tails in places that would catch on everything and draw blood. |
God will not look you over for medals, diplomas, or degrees – but for scars
Official MINI RECCE Photo and Discussion Thread (Page 209 of 222)
AR Sponsor