Quoted:
What is a Noveske Mod 0 chamber? How does this compare to the normal AR or Wylde chamber? Will the Noveske S/S barrels with Mod 0 chamber have M4 Feed ramps?

Noveske:  ...........And then, when we go to chambering, it’s a chambering process that I developed as an employee of Pac-Nor, and I looked at how they were chambering barrels, and I saw the logic in it, and I found ways to improve it. The reamers are all custom-made for me as far as the grind, the angles, the number of flutes. The way we chamber, you never get any scoring on the lands forward of the throat like most other people have to deal with, because our chips are forced out the back. The end result is a beautiful, highly polished chamber. Every barrel is individually inspected to ensure against or prevent reamer wear and have an undersized chamber. They all get gauged on every point, and the design of the chamber is a design I developed after many different evolutions. This was designed to work…to do full-auto mag dumps with [Black Hills] MK 262 Mod 1 [77gr Open-Tip Match (OTM) 5.56x45mm ammo], and now you can sit there and pour as much ammo as you can through the gun on full-auto, and the thing that’s gonna’ fail is the gas tube. We haven’t had any stuck chambers since I came up with the recent chamber, which is called the Noveske…the acronym, which we write on the barrel is "NMm0", and that stands for Noveske Match Mod 0. It’s a chamber that gives you 100% reliability with as much retained accuracy as possible. You can have a more accurate chamber design, but you sacrifice battle-grade reliability. You can get stuck cases and other things with different chambers.