Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
11/24/2017 4:44:23 PM
11/22/2017 10:05:29 PM
Posted: 10/15/2004 5:26:16 PM EST
I have two Eagle Arms lowers I just got. Right now both will fire on both pull and release if you let go slow. Any ideas?
Link Posted: 10/15/2004 6:01:21 PM EST
Where did you get your lower parts from?

Sounds like a bad disconnecter. Get two ....
Link Posted: 10/15/2004 6:21:52 PM EST
Parts came installed but I got them second hand so I don't know.

Link Posted: 10/16/2004 7:36:55 AM EST
Disconnector is not engaging hook on back of hammer enough. You need to grind / file the tang on the front of disconnector where it contacts trigger slightly. This will allow the hook of the disconnector to rotate forward slightly and hold the hammer down "longer" until the sear surfaces align properly during trigger release.
Link Posted: 10/16/2004 8:56:01 AM EST
[Last Edit: 10/16/2004 8:56:11 AM EST by Ghost-Shooter]
Get two new name brand LPKs, install, and be done with it.
Top Top