AR Sponsor
Posted: 10/10/2014 8:33:45 PM EDT
|
Can a few people measure the distance from the front of the upper receiver to the end of your lo pro rifle length gas block?
My guesstimate is 12.5" but I'd love a few actual measurements I'd also really love to know what brand gas block you're using Thanks Posted Via AR15.Com Mobile |
|
Quoted:
Can a few people measure the distance from the front of the upper receiver to the end of your lo pro rifle length gas block? My guesstimate is 12.5" but I'd love a few actual measurements I'd also really love to know what brand gas block you're using Thanks Posted Via AR15.Com Mobile My ....this SLR gas block... is one inch long. The back end of it is however many inches the gas block shoulder on my barrel is from the front of my receiver. The front end of it is however many inches the gas block shoulder on my barrel is from the front of my receiver, plus 1 inch. |
|
Quoted:
Can a few people measure the distance from the front of the upper receiver to the end of your lo pro rifle length gas block? My guesstimate is 12.5" but I'd love a few actual measurements I'd also really love to know what brand gas block you're using Thanks Posted Via AR15.Com Mobile I also have a ...this M.I. Micro GB... which is 1.125 inch long. The back end of it is however many inches the gas block shoulder on my barrel is from the front of my receiver. The front end of it is however many inches the gas block shoulder on my barrel is from the front of my receiver, plus 1.125 inch. |
|
Quoted:
I also have a ...this M.I. Micro GB... which is 1.125 inch long. The back end of it is however many inches the gas block shoulder on my barrel is from the front of my receiver. The front end of it is however many inches the gas block shoulder on my barrel is from the front of my receiver, plus 1.125 inch. Quoted:
Quoted:
Can a few people measure the distance from the front of the upper receiver to the end of your lo pro rifle length gas block? My guesstimate is 12.5" but I'd love a few actual measurements I'd also really love to know what brand gas block you're using Thanks Posted Via AR15.Com Mobile I also have a ...this M.I. Micro GB... which is 1.125 inch long. The back end of it is however many inches the gas block shoulder on my barrel is from the front of my receiver. The front end of it is however many inches the gas block shoulder on my barrel is from the front of my receiver, plus 1.125 inch. P.S. I have carbine gas, so none of those numbers are anything like 12.5 |
|
Quoted:
It will depend on what gas system. Carbine, midlength, rifle Also what end of the gas block? The end towards muzzle or end towards receiver? Sorry if my OP wasn't clear Rifle gas Muzzle end of the gas block I want measurements from a few different brands of gas blocks although they should be within 1/2" Posted Via AR15.Com Mobile |
|
Quoted:
That's the question. I don't have any rifle-gas uppers in front of me Posted Via AR15.Com Mobile Quoted:
Quoted:
So...how far is it from the front of YOUR upper receiver to the gas block shoulder on YOUR rifle-gassed barrel? That's the question. I don't have any rifle-gas uppers in front of me Posted Via AR15.Com Mobile Ooooooooooo, crap. Why didn't you say so? .....you may ignore my previous posts. ETA: The 13" handguard on ...this BCM rifle length upper.... doesn't cover the lopro gas block , while the 15" handguard on ...this BCM rifle length upper.... DOES cover the lopro gasblock. Does this help at all?? Am I getting any warmer trying to figure out what it is that you're trying to figure out? |
|
Quoted:
Can a few people measure the distance from the front of the upper receiver to the end of your lo pro rifle length gas block? My guesstimate is 12.5" but I'd love a few actual measurements I'd also really love to know what brand gas block you're using Thanks Posted Via AR15.Com Mobile Front of receiver to front of block is 13 ¾” on my rifle length ar I think my LP block is a re bagged Troy … from a local shop Best I can tell without removing the guard it covers one inch or the barrel |
|
Quoted:
Front of receiver to front of block is 13 ¾” on my rifle length ar I think my LP block is a re bagged Troy … from a local shop Best I can tell without removing the guard it covers one inch or the barrel Quoted:
Quoted:
Can a few people measure the distance from the front of the upper receiver to the end of your lo pro rifle length gas block? My guesstimate is 12.5" but I'd love a few actual measurements I'd also really love to know what brand gas block you're using Thanks Posted Via AR15.Com Mobile Front of receiver to front of block is 13 ¾” on my rifle length ar I think my LP block is a re bagged Troy … from a local shop Best I can tell without removing the guard it covers one inch or the barrel Ding ding ding Winner winner, chicken dinner |
AR Sponsor