AR Sponsor
Posted: 4/11/2009 3:09:44 PM EDT
|
I have a Larue LT-158-30mm SPR-S mount and need to know if if this mount will fit a Nightforce 3.5-15x50 on a standard A3 flattop receiver?
There is not a front sight to interfere with the scope picture , will the 50mm objective clear ? Also does this mount have any elevation built into it or is it level with line of sight and the only elevation I will get from the scope itself? Thanks Para069 |
Over here they said the 158 had 10 MOA.
Para. you did not say ladder rail cover's, I thought you had the full cover's. |
|
Quoted:
Over here they said the 158 had 10 MOA.
Para. you did not say ladder rail cover's, I thought you had the full cover's. No, I am going to put ladders on the sides and top |
|
Quoted:
It will fit fine... I don't have a quad rail on mine, but I do have a 50mm scope and have plenty of room under it in front. http://memimage.cardomain.com/ride_images/1/1090/1321/2723160189_large.jpg That looks like a SPR 1.5 and not a SPR-S... which is it? The SPR-S is lower. |
|
Quoted:
Quoted:
It will fit fine... I don't have a quad rail on mine, but I do have a 50mm scope and have plenty of room under it in front. http://memimage.cardomain.com/ride_images/1/1090/1321/2723160189_large.jpg That looks like a SPR 1.5 and not a SPR-S... which is it? The SPR-S is lower. Good call, I didn't see that in the OP. The LT-158 is the one that was originally made for 34mmm tubes and lowers the mount by what? Isn't it like 8/100"? I have about a 1/2" clearance (maybe a little more), so the less than 10th of an inch difference would be negligilbe. |
AR Sponsor