AR Sponsor
[ARCHIVED THREAD] - BCM KMR Picture thread ONLY (Page 1 of 5)
Posted: 3/29/2014 4:16:10 PM EDT
|
Please Post Pictures and Descriptions of your BCM KMR RAILS HERE
Any Questions or Comments should be made in other Threads, to keep the "Purpose and Intent of this Thread" purely on visual stimulation. Thanks again!! 
Custom Built: Here's the Specs (As of 03-29-14) Upper:
Lower
|
|
Quoted: There is at least one of these already, a BCM thread in ar discussions, and in the BCM forum. Here you go OP 14.5" ELW Mid-length with 13" KMR painted with 1 light coat of Krylon Khaki. Daniel Defense Factory lower ETA: I am now using a Geissele SSA FCG.  |
|
Quoted: Please Post Pictures and Descriptions of your BCM KMR RAILS HERE Any Questions or Comments should be made in other Threads, to keep the "Purpose and Intent of this Thread" purely on visual stimulation. Thanks again!! http://i1345.photobucket.com/albums/p667/thmoxy/Guns/DEADCB44-9E4C-449E-83E2-42CFE36FB1C7_zpsjocmnjns.jpg http://i1345.photobucket.com/albums/p667/thmoxy/Guns/C1254757-83AA-4E3A-AE8C-86EAC88F1206_zpswqkzqwsf.jpg http://i1345.photobucket.com/albums/p667/thmoxy/Guns/DD3A65B6-B890-47AD-9488-48492155524C_zpsevyxohqd.jpg Custom Built: Here's the Specs (As of 03-29-14) Upper:
Lower
|
|
Quoted:
<a href="http://s282.photobucket.com/user/9DivDoc/media/1_zpse51dc166.jpg.html" target="_blank">http://i282.photobucket.com/albums/kk253/9DivDoc/1_zpse51dc166.jpg</a> <a href="http://s282.photobucket.com/user/9DivDoc/media/1_zpsa1353d23.jpg.html" target="_blank">http://i282.photobucket.com/albums/kk253/9DivDoc/1_zpsa1353d23.jpg</a> what was that about 4 nsr panel packs? lol looks good |
|
Quoted:
Keymod whore.  Quoted:
Quoted:
Three iirc....but I have a shitload of them...all my handguards are keymod (BCM,Noveske & Mega)... got an SLR 15" 3G on the way... hopefully the NSR panels will fit them as well....  Well yeah but since I am not getting paid to collect these.....I don't feel like I'm a whore.....more of a keymod slut I think.... |
Here is my latest, Mega with all JP Internals & the new KMR.
Specs: Mega Ambi Billet upper/lower matching set in .223. BCM Lower Parts Kit minus trigger Magpul UBR stock Battle Arms ambi safety Gas Vent forward assist Mega Hogue grip Geissele (straight) SD 3 gun trigger Trigger Pins - JP Enterprise V7 Weapon Systems ejection port door & door rod. JP Midlength Gas Tube Low Mass JP JPBC-3A bolt carrier JP Silent Capture buffer - JPSCS-15 JP JPGS-5B Adjustable Gas Block YHM Phantom QD muzzle break Raptor Charging Handle Bravo Company KMR 13 Rail Wilson barrel in .223 Wylde at 14.5” Pinned |
Billet lower receiver Geiselle ssa-e trigger Bad ass ambi safety selector Bcm gunfighter mod 3 grip B5 sopmod bravo coyote buttstock Aero precision upper Arms unlimited Nib BCG Raptor ambi charging handle BCM KMR keymod rail IWC keymod sling mount IWC keymod hand stop HSP coyote Inforce WML Daniel defense 14.5 Lw midlength Geiselle gas block Griffin armament flash comp Acog ta31hRSR w/ GDI R -COM E model Aimpoint micro t1 w/ larue LT724 moun |
|
Quoted: http://s4.postimg.org/gi1y9hbkt/DSC_7272.jpg PWS FSC556 BCM KMR10 Vltor MUR-1S Vltor E-Mod Elcan SpecterDR 1-4x Magpul MIAD Colt LE6920 Geissele HSNM DMR BAD-ASS Ambi Safety PRI Gas Buster |
IMG_6096 by 556 Channel (HD), on Flickr 
IMG_6100 by 556 Channel (HD), on Flickr 
IMG_6092 by 556 Channel (HD), on Flickr 
IMG_6097 by 556 Channel (HD), on Flickr |
|
Quoted: https://farm8.staticflickr.com/7441/14068537724_2de2f50a9c_b.jpg IMG_6096 by 556 Channel (HD), on Flickr https://farm6.staticflickr.com/5265/14044280506_f77a041dfb_b.jpg IMG_6100 by 556 Channel (HD), on Flickr https://farm8.staticflickr.com/7323/14067860014_3fdeb49eaa_b.jpg IMG_6092 by 556 Channel (HD), on Flickr https://farm8.staticflickr.com/7191/14064227882_2420e46aea_b.jpg IMG_6097 by 556 Channel (HD), on Flickr That carbine is screaming for an Eotech imo.
|
|
Quoted: https://farm8.staticflickr.com/7441/14068537724_2de2f50a9c_b.jpg IMG_6096 by 556 Channel (HD), on Flickr https://farm6.staticflickr.com/5265/14044280506_f77a041dfb_b.jpg IMG_6100 by 556 Channel (HD), on Flickr https://farm8.staticflickr.com/7323/14067860014_3fdeb49eaa_b.jpg IMG_6092 by 556 Channel (HD), on Flickr https://farm8.staticflickr.com/7191/14064227882_2420e46aea_b.jpg IMG_6097 by 556 Channel (HD), on Flickr |
|
Quoted:
What type of BUIS are those? Quoted:
Quoted:
https://farm8.staticflickr.com/7441/14068537724_2de2f50a9c_b.jpg IMG_6096 by 556 Channel (HD), on Flickr https://farm6.staticflickr.com/5265/14044280506_f77a041dfb_b.jpg IMG_6100 by 556 Channel (HD), on Flickr https://farm8.staticflickr.com/7323/14067860014_3fdeb49eaa_b.jpg IMG_6092 by 556 Channel (HD), on Flickr https://farm8.staticflickr.com/7191/14064227882_2420e46aea_b.jpg IMG_6097 by 556 Channel (HD), on Flickr magpul mbus pro |
|
Waiting for the 15" KMR to come out.
13.7" Noveske Infidel barrel BCM KMR 13" Noveske KX5 
My only complaint, one i am not too worried about, but the finish came off of the rail. I was using my little wooden mallet, kinda tapping the rail onto the barrel not. Anyone else have this issue? 
I say i am not worried about it because i plan on using this upper a lot and will probably rattle can paint it. |
|
I posted this iin the build it yourself section as well.
I made the decision to stick with the BCM KMR, and when they come out with the 15", i will put it on. 
The pin and weld came out great, was going to grind the bead off the weld, but, i like the looks of it. Just drilled the pig, timed it, drilled a bit of thread, dropped in a piece of coat hanger and zapped it. 
Haven't shot it yet, but, not expecting any issues. All quality parts. |
|
Quoted:
Please Post Pictures and Descriptions of your BCM KMR RAILS HERE Any Questions or Comments should be made in other Threads, to keep the "Purpose and Intent of this Thread" purely on visual stimulation. Thanks again!! http://i1345.photobucket.com/albums/p667/thmoxy/Guns/DEADCB44-9E4C-449E-83E2-42CFE36FB1C7_zpsjocmnjns.jpg http://i1345.photobucket.com/albums/p667/thmoxy/Guns/C1254757-83AA-4E3A-AE8C-86EAC88F1206_zpswqkzqwsf.jpg http://i1345.photobucket.com/albums/p667/thmoxy/Guns/DD3A65B6-B890-47AD-9488-48492155524C_zpsevyxohqd.jpg Custom Built: Here's the Specs (As of 03-29-14) Upper:
Lower
Why the accuwedge and the o ring? Santan not tight? |
|
Fucking sweet |
|
I may have to try one of those stocks. |
|
I bought some of the Noveske rail covers. I really like them. But I couldn't get the handstops on. |
|
Quoted:
I bought some of the Noveske rail covers. I really like them. But I couldn't get the handstops on. Quoted:
I bought some of the Noveske rail covers. I really like them. But I couldn't get the handstops on. Hairdryer. Gotta warm themy up and they go right on. |
The handstop was a bit of a challenge for me to get on as well. I eventually got it on with a lot of pushing, pulling, and cursing 
Looks good Lancelot! I'm thinking about changing out my black furniture for some of that new BCM wolf grey, whenever it's released. |
" />
|
Quoted: The handstop was a bit of a challenge for me to get on as well. I eventually got it on with a lot of pushing, pulling, and cursing Looks good Lancelot! I'm thinking about changing out my black furniture for some of that new BCM wolf grey, whenever it's released. I like Grey. When I can get all the right pieces in grey, I'll have a grey gun.
|
|
Quoted: http://i1293.photobucket.com/albums/b593/mckelveymx/Mobile%20Uploads/2014-05/F78EA389-D6E5-41B0-802C-36DA4CB94308_zps9zgz9p4o.jpg Looking for a panel kit and hand stop kit if anyone has recommendations. |
|
Quoted:
IPAD photos. Please don't hate me. https://scontent-b-sea.xx.fbcdn.net/hphotos-ash3/t1.0-9/10312450_10203691802120526_9128867027103388048_n.jpg https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-frc1/t1.0-9/10247304_10203691790760242_1864176987570341895_n.jpg Considering some of the horrid pictures I have taken with my iPad those aren't bad. This is the basic set up I was thinking of, except in a different color. It is nice and simple. |
|
How solid is the kmr? My 13 troy alpha wiggles a bit with pressure. I wanted to build a rifle with fixed sights on a ff tube. |
|
Quoted:
How solid is the kmr? My 13 troy alpha wiggles a bit with pressure. I wanted to build a rifle with fixed sights on a ff tube. Quoted:
How solid is the kmr? My 13 troy alpha wiggles a bit with pressure. I wanted to build a rifle with fixed sights on a ff tube. Definitely no wiggle on a KMR setup. Pic Thread 
|
[ARCHIVED THREAD] - BCM KMR Picture thread ONLY (Page 1 of 5)
AR Sponsor
Join the Community
Your next conversation starts here.
Create your free account to join discussions, share your experience, save topics, and connect with the AR15.COM community.
- Join discussions
- Follow topics and replies
- Connect with fellow enthusiasts
Already a member? Sign in
Stay informed by subscribing to our Newsletter