AR Sponsor
- -PISTON AR PICTURE THREAD !! - - (Page 1 of 36)
Posted: 10/7/2009 1:35:12 PM EDT
[Last Edit: mag162][Edited]
NO DI guns allowed 
here's my LMT 
|
LWRC Gas Piston 6.8 mm Mid length Quad FF rail GG&G Grip Troy front and rear sights Trijicon front sight post Magpul grip VTLOR EMOD stock Vandenburg Custon trigger job Midway Sling attachment LaRue sling (not pictured) Barnett 30 round mag EOTech 553 EOTech 3x Mag |
|
Originally Posted By Stukas87:
Adams Arms on a Sabre Defence 14.5 upper 3,000rds so far so good................. Hell Yeah http://i83.photobucket.com/albums/j292/stukas87/S6003420.jpg Is that a 14.5" mid-length? If so, what barrel/upper is it? Thanks! 
|
|
Here's mine.
RRA lower LaRue upper, Noveske N4 barrel, LMT M16 BCG, PWS mid length piston (built by MSTN) Cav Arms A1 length stock Pic shows Monsterman grip. It now sports a std A2 grip with SolarTactical CA legal grip and can use regular cap mags legally. Still not sure of optic. 
Found pic of grip (updated pic) 
|
|
hopefully I can get this moved over to the new forum...
LWRC pic thread my 10.5" LWRC M6A2 and 8" MRE PSD. I also have a LMT CQB MRP that waiting on a tax stamp. I own quite a few DI's and wanted a piston for diversity. I believe you need a little diversity in your life from time to time.. 
and almost the whole family.. 
|
Freedom is not Free..
|
Originally Posted By jBoy723:
hopefully I can get this moved over to the new forum... LWRC pic thread my 10.5" LWRC M6A2 and 8" MRE PSD. I also have a LMT CQB MRP that waiting on a tax stamp. I own quite a few DI's and wanted a piston for diversity. I believe you need a little diversity in your life from time to time.. http://i735.photobucket.com/albums/ww359/jboy723/Mobile%20Uploads/utf-8BSU1HMDAyODItMjAwOTA5MzAtMTgxO.jpg http://i735.photobucket.com/albums/ww359/jboy723/IMG_2945.jpg and almost the whole family.. http://i735.photobucket.com/albums/ww359/jboy723/Mobile%20Uploads/utf-8BSU1HMDAyOTItMjAwOTEwMDItMDk1N.jpg I think you have my favorite collection on this entire site  Since we seem to have similar taste, I'm starting to think that I need a LWRC for a little diversity sometime down the road
|
|
Originally Posted By jBoy723:
hopefully I can get this moved over to the new forum... http://i735.photobucket.com/albums/ww359/jboy723/IMG_2945.jpg What upper and lower are these? |
|
Originally Posted By thehouseproduct:
Originally Posted By jBoy723:
hopefully I can get this moved over to the new forum... http://i735.photobucket.com/albums/ww359/jboy723/IMG_2945.jpg What upper and lower are these? http://www.lwrci.com/Products/PSD/tabid/87/Default.aspx |
|
Originally Posted By Jeep297:
Originally Posted By thehouseproduct:
Originally Posted By jBoy723:
hopefully I can get this moved over to the new forum... http://i735.photobucket.com/albums/ww359/jboy723/IMG_2945.jpg What upper and lower are these? http://www.lwrci.com/Products/PSD/tabid/87/Default.aspx thanks Jeep..how's the SBR coming along?..knowing you, I have confidence you'll make a great choice either way you decide to go.. |
Freedom is not Free..
|
Originally Posted By jBoy723:
Originally Posted By Jeep297:
Originally Posted By thehouseproduct:
Originally Posted By jBoy723:
hopefully I can get this moved over to the new forum... http://i735.photobucket.com/albums/ww359/jboy723/IMG_2945.jpg What upper and lower are these? http://www.lwrci.com/Products/PSD/tabid/87/Default.aspx thanks Jeep..how's the SBR coming along?..knowing you, I have confidence you'll make a great choice either way you decide to go.. I already have everything, I'm just waiting on the paperwork so I can put it together. I really wish it didn't take so long but it'll be worth it in the long run. If I was to decide to get my first piston upper would you suggest the LWRC 10.5 or the PSD (in 6.8)? Any things I should know between the two? I've heard there's not much point in going shorter than 10.5 unless you go 6.8 but don't have any personal experience in the area. |
|
Originally Posted By Jeep297:
Originally Posted By jBoy723:
Originally Posted By Jeep297:
Originally Posted By thehouseproduct:
Originally Posted By jBoy723:
hopefully I can get this moved over to the new forum... http://i735.photobucket.com/albums/ww359/jboy723/IMG_2945.jpg What upper and lower are these? http://www.lwrci.com/Products/PSD/tabid/87/Default.aspx thanks Jeep..how's the SBR coming along?..knowing you, I have confidence you'll make a great choice either way you decide to go.. I already have everything, I'm just waiting on the paperwork so I can put it together. I really wish it didn't take so long but it'll be worth it in the long run. If I was to decide to get my first piston upper would you suggest the LWRC 10.5 or the PSD (in 6.8)? Any things I should know between the two? I've heard there's not much point in going shorter than 10.5 unless you go 6.8 but don't have any personal experience in the area. I personally like the PSD except for the fact that I got it chambered in 5.56. I bought it with the intensions of it primarily being a range toy only. before the purchase of the PSD, I already had (4) 10.5"'s and a 12" SBR and I would suggest if you were to decide on the PSD, go with the 6.8 if you plan on using it for a self defense weapon. It makes sense in the fact that it will give you more stopping power if the need should arise. I plan on running it to the ground and it was better for me financially to get the 5.56. |
Freedom is not Free..
|
Originally Posted By jBoy723:
I personally like the PSD except for the fact that I got it chambered in 5.56. I bought it with the intensions of it primarily being a range toy only. before the purchase of the PSD, I already had (4) 10.5"'s and a 12" SBR and I would suggest if you were to decide on the PSD, go with the 6.8 if you plan on using it for a seld defense weapon. It makes sense in the fact that it will give you more stopping power if the need should arise. I plan on running it to the ground and it was better for me financially to get the 5.56. Thanks! Do you think there will be less reliability issues with the 6.8? The only thing that's kept me from going that short is the downfalls everyone talks about. I would love to get a PSD though. Seems like once you jump into the SBR world every other AR seems too long 
|
|
Originally Posted By Jeep297:
Originally Posted By jBoy723:
I personally like the PSD except for the fact that I got it chambered in 5.56. I bought it with the intensions of it primarily being a range toy only. before the purchase of the PSD, I already had (4) 10.5"'s and a 12" SBR and I would suggest if you were to decide on the PSD, go with the 6.8 if you plan on using it for a seld defense weapon. It makes sense in the fact that it will give you more stopping power if the need should arise. I plan on running it to the ground and it was better for me financially to get the 5.56. Thanks! Do you think there will be less reliability issues with the 6.8? The only thing that's kept me from going that short is the downfalls everyone talks about. I would love to get a PSD though. Seems like once you jump into the SBR world every other AR seems too long not at all. One of our friends has a the 6.8 and both have been equally reliable so far. I went 5.56 due to ammo cost and with the intensions of running the dog shit out of it. I would not shoot it as much if i went 6.8 but that's just me..YMMV |
Freedom is not Free..
|
Originally Posted By Jeep297:
Originally Posted By jBoy723:
I personally like the PSD except for the fact that I got it chambered in 5.56. I bought it with the intensions of it primarily being a range toy only. before the purchase of the PSD, I already had (4) 10.5"'s and a 12" SBR and I would suggest if you were to decide on the PSD, go with the 6.8 if you plan on using it for a seld defense weapon. It makes sense in the fact that it will give you more stopping power if the need should arise. I plan on running it to the ground and it was better for me financially to get the 5.56. Thanks! Do you think there will be less reliability issues with the 6.8? The only thing that's kept me from going that short is the downfalls everyone talks about. I would love to get a PSD though. Seems like once you jump into the SBR world every other AR seems too long I wouldn't question its reliability since it's complete package from LWRC, and I haven't seen any owners mention any problems either. Works fine here too! http://www.youtube.com/watch?v=pM1SntQ7s7k
I won't have time to pick mine up (pistol) until later this next week, hopefully I can get it out to the range soon. I'm definitely glad I went with the 6.8 though. |
|
Originally Posted By Pleaforwar: http://i1022.photobucket.com/albums/af350/daniel_frank3/longstroke4.jpg http://i1022.photobucket.com/albums/af350/daniel_frank3/shortstroke.jpg Nice............... |
|
Nice rig....what stock is that..???? |
Any issues with the Troy on the front gas block? (it looks Troy like anyway  )??
Nice stick! Originally Posted By Stukas87:
Adams Arms on a Sabre Defence 14.5 upper 3,000rds so far so good................. Hell Yeah http://i83.photobucket.com/albums/j292/stukas87/S6003420.jpg |
|
Originally Posted By dirtbikesandguns:
My two Pistons............. http://i691.photobucket.com/albums/vv276/ridektm68/100_1535.jpg http://i691.photobucket.com/albums/vv276/ridektm68/100_1536.jpg Nice job buddy!
|
|
My previous M6A2 (5.56)
http://img.photobucket.com/albums/v455/Elbaus/Firearms/0085.jpg Current M6 (5.56 - same lower actually, just new upper...and some paint) http://img.photobucket.com/albums/v455/Elbaus/Firearms/IMG_1529.jpg http://img.photobucket.com/albums/v455/Elbaus/Firearms/IMG_1530.jpg |
Buckeye Firearms Association Leaders Volunteer Co.
Joined:
May 2005
Posts:
3404
EE: 100% (12)
OH, USA
- -PISTON AR PICTURE THREAD !! - - (Page 1 of 36)
AR Sponsor