AR Sponsor
Official "Appraisal and what is this worth?" Thread (Page 4 of 4)
|
Reasonable asking price on a NOS box of seven Adventure Line 20 rounders with aluminum followers? The mags are shelf-worn, but never inserted into a rifle. The box is dated 1970. The lid has clear wrapping tape on it, the rest of the box is good with no damage or major stains. Thanks. Note: Posted this in the "Retro" appraisal thread last month, but no responses. |
"An age of glory passed like a lightning flash. The mandate of heaven passed from you but you didn't see. Times change and power passes. It is the pity of the world."
Song dynasty poet
Song dynasty poet
Joined:
Jan 2023
Posts:
536
EE: 100% (59)
PA, USA
|
What would a used complete colt lower sell for roughly? Left side is rollmarked M4 CARBINE CAL 5.56x45 LE 100k No QR codes, milspec sized trigger pins, magpul asap sling plate and shelf left in the lower to prevent full auto FCG Let me know if I need to provide more info Thanks for your time |
Member
Joined:
Jul 2024
Posts:
99
EE: 100% (1)
TX, USA
|
Originally Posted By arilulu14: What would a used complete colt lower sell for roughly? Left side is rollmarked M4 CARBINE CAL 5.56x45 LE 100k No QR codes, milspec sized trigger pins, magpul asap sling plate and shelf left in the lower to prevent full auto FCG Let me know if I need to provide more info Thanks for your time @arilulu14 There are several M4 Carbine marked lowers right now on Gunbroker for under $700. I've been meaning to pick up a few, but with the OEM-1 and OEM-2 models usually coming in around $750 to $800, it just makes sense to buy the complete gun. The OEM's are just missing furniture and are "M4 Carbine" marked. |
|
I bought a complete police trade in LE6920 a while back, and then stamped the lower, and put a 11.5" Colt upper on it. What's a good asking price for the original 16" upper. It has all the standard Colt markings on the barrel, bolt carrier, and bolt. The carry handle that came with it has a square stamped on it. I did replace the 6 hole Colt hand guards, with some standard 7 hole ones. Planning on selling or trading it for 5.56 ammo local. 
|
|
Diemaco m4 upper and cerro forge carry handle. My understanding is that these parts are kind of uncommon and may be worth something to collectors, just wondering what people think they might go for. Found a few conversations on reddit mentioning prices for upper receiver but they were a few years old. Any insight appreciated! 1 2 3 |
|
Hello, I have a used but not abused Colt LE marked M4A1 lower I would like to sell. Got it in a trade a few years back, but it’s sat in my safe since. Not sure on round count from original owner. Tried to capture its condition in pictures below. H2 buffer. 100% OEM Colt. What value does the hive suggest? TIA, appreciate you guys @Muricha / @Clan_McIntyre , do you think this is also $750-800? Thank you    
|
Joined:
Nov 2024
Posts:
1
EE: 100% (1)
IL, USA
|
I have a Colt M4 carbine LE-6920 with a 16'' barrel that was manufactured in 2012. I am the original owner and probably shot less than 100 rounds through the gun. It's just been sitting in my gun safe, and I never use it, so I'm thinking about selling it. Just curious what the current market value is for this AR-15. It's pretty much bone stock. I added a nikon scope and have a bipod. Also comes with a soft gun carrying case, 2 magazines, and about 20 boxes of ammo. I'm in Illinois, so I have to sell it out of state and use an out of state FFL because of Illinois new 'assult rifle' laws. anyways I attached an imgur link below for the gallery of pics of the rifle. please let me know what you guys think. https://imgur.com/a/VH4DnS3 |
Joined:
Dec 2024
Posts:
2
EE: 0% (0)
TX, USA
Member
Joined:
Jan 2025
Posts:
5
EE: 100% (5)
CO, USA
|
Colt OEM1 upper, zero rounds through the upper and barrel. The front sight base was cut down for the Colt rail (completely servicable dremal cut and painted, but not beautiful) BCM charging handle and Bolt carrier group are used (maybe 250 rounds) and the MRO is used and shows it, but works perfectly. The optic riser is fine with the backup sights down, however it does not cowitness with the (Troy I think?) Backup sights. I’m thinking about letting this one go if it’s worth something to someone. What do you folks think it’s worth in the EE? Thanks! Attached File Attached File Attached File Attached File Attached File |
Member
Joined:
Jan 2025
Posts:
6
EE: 100% (5)
CO, USA
|
Originally Posted By Buzz-LightBeer: Colt OEM1 upper, zero rounds through the upper and barrel. The front sight base was cut down for the Colt rail (completely servicable dermal cut and painted, but not beautiful) BCM charging handle and Bolt carrier group are used (maybe 250 rounds) and the MRO is used and shows it, but works perfectly. The optic riser is fine with the backup sights down, however it does not cowitness with the (Troy I think?) Backup sights. I’m thinking about letting this one go if it’s worth something to someone. What do you folks think it’s worth in the EE? Thanks! https://www.ar15.com/media/mediaFiles/603259/IMG_9197_jpeg-3441565.JPG https://www.ar15.com/media/mediaFiles/603259/IMG_9198_jpeg-3441566.JPG https://www.ar15.com/media/mediaFiles/603259/IMG_9199_jpeg-3441567.JPG https://www.ar15.com/media/mediaFiles/603259/IMG_9200_jpeg-3441568.JPG https://www.ar15.com/media/mediaFiles/603259/IMG_9201_jpeg-3441570.JPG Attached File Attached File Attached File Attached File Attached File |
|
Anyone have a rough estimate of what a Noveske Gen 1 Chainsaw stripped lower is worth? I know it’s a relatively early production. It was bought when Gen 2’s were readily available from dealers. It doesn’t have the original card board box, but it’s never been assembled. It is chainsaw marked on the bottom, but I can’t find any blems on it at all. I can try to get pictures later. |
Joined:
Mar 2025
Posts:
1
EE: 0% (0)
NC, USA
|
Looking for information/value on a hand etched/numbered Geissele High-Speed National Match trigger. This is my first post on this site so if I'm in the wrong place, help finding the right place would be appreciated. Can't figure out how to add a photo. Trigger is numbered "768" |
Joined:
Jun 2025
Posts:
1
EE: 0% (0)
USA
|
Looking for info on a CMMG Polymer Ambidextrious Adjustable AR15 Upper Reciever with Patent Pending extended charging handle. Not sure where to price this at or how it even came to be, any info would be greatly appreciated. Pics can be found here https://imgur.com/a/QVYSRVQ |
| Factory built Noveske Gen2 lower and Noveske factory built Noveske marked Vltor mono MUR upper Afghan barrel. OG flash hider professionally removed and SiCo three prong suppressor mount pinned and welded. Under 1k fired through this |
|
Hope this is in the right topic. i am needing some help. I have a Colt 6921 SOCOM complete upper. This was new when I bought it. I took the paper rope out of the barrel when i got it. It is as follows. 14.5 Colt SOCOM Heavy Barrel with the 203 cuts under the hand guards, It is not P&W’ed. C marking on upper, M4 stamped in the front of upper above gas tube hole C marking on barrel, date marking is behind the FSB (06/08) O marking near the chamber C stamped bolt carrier, MPC marked bolt, normal phosphate coating, FA profile MATEC BUIS It has the KAC quad rail installed with the rail panels and broom stick. I can’t remember if I have shot it, I have its not been fired more than 100 rounds. I have had this for many years. I bought in 2011. Can anyone tell me what it is worth? I have pictures, I just don’t know how to attach them. |
Joined:
Jan 2024
Posts:
860
EE: 100% (94)
USA
|
Originally Posted By sixers79: What's a sealed original Rare Breed FRT-15 worth these days, now that that concept has evolved so much (but also the quality of their latest products evidently plummeted much much)? |
https://www.ArizonaShooting.org
|
What's a reasonable asking price for a NOS Geissele MK2 13" handguard w/wrench still in a ziplock bag and stickers and patch? Handguard was taken out to inspect, but not mounted. |
"An age of glory passed like a lightning flash. The mandate of heaven passed from you but you didn't see. Times change and power passes. It is the pity of the world."
Song dynasty poet
Song dynasty poet
|
I found a new Remington Defense RAHG-M4S in my parts box that I was looking to put on the EE. I can’t find much info on value other than google searches that link to Reddit users looking for this. I don’t think there’s many out there. Attached File Attached File |
|
Attached File Rock River Arms 9mm upper. 16 inch barrel with an A2 upper receiver. Bought it brand new in 09 I think. Approximately 500 rounds through it. Anyone have a clue? I haven’t found much of anything about these online. |
Official "Appraisal and what is this worth?" Thread (Page 4 of 4)
AR Sponsor