Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
BCM
Member Login

Site Notices
10/30/2020 2:42:12 PM
Page / 7
Link Posted: 11/25/2005 11:30:43 PM EDT
[Last Edit: 11/25/2005 11:32:35 PM EDT by HIREFORFIRE]
Jmikesteen What is on your mag well is that a convertion of some kind?
Link Posted: 11/29/2005 9:31:40 AM EDT
[Last Edit: 11/29/2005 9:33:45 AM EDT by jmikesteen]
No it is one of my collection of AR15 mag adapters, There were five different ones made. Two of them had lock out pins to prevent accidental removal of the adapter. the one in the picture is one of those. Here are all five together. They work so well and I have so many AR mags that I don't have a big supply of Galil mags. I just keep one or two of each type for the collection. By the way does anyone here have any Aluminum Galil 35 round mags? I have 3 and they are pretty scarce.

http://i34.photobucket.com/albums/d121/jmikesteen/5galiladapters.jpg
Link Posted: 12/12/2005 1:31:43 PM EDT
Link Posted: 12/12/2005 4:52:37 PM EDT
Those are late model 62S handguards. The butt Stock is a Galil.  Rod Maurer at Fidelisfirearms.com converts the Galil stocks to fit wood stocked 62's without modifing the rifle only the Galil stock.
Link Posted: 1/26/2006 3:03:38 PM EDT
Thought I'd add my new Valmet into the mix -



Link Posted: 1/30/2006 7:11:41 PM EDT




Link Posted: 1/30/2006 8:45:44 PM EDT
Levallois, that Valmet rocks ! Which model # is that one ? I'm putting it on my wants list.
Link Posted: 1/31/2006 10:08:39 AM EDT
hkusp,

Thanks!  I've always wanted one.  It's a Model 76 FS or folding stock in .223 and I was lucky to find it at a price I could afford.  I should warn you that the expensive part of owning a Valmet are the magazines - they run $100-150 each for 30-round factory and $60-70 for Tromix (if you can find them).  Other than mine and one that sold on Gunbroker recently (with a missing part and non-factory mags) I didn't see another folder for less than $2K, but with patience and luck you could probably find another.  Good luck!!

John
Link Posted: 2/7/2006 1:08:14 AM EDT
[Last Edit: 2/7/2006 1:10:54 AM EDT by tapeo1]
1987 Action Arms 16" IMI Galil AR

Link Posted: 2/11/2006 8:47:24 PM EDT
I just got this refinished Sporter ARM back from Jayson at IGF.  It looks MUCH better than the one I sent him originally.



-JZ
Link Posted: 2/23/2006 10:27:57 PM EDT
My Action Arms Model 372.  

(Until death do us part)

         






Link Posted: 5/5/2006 1:19:31 AM EDT
I must say those are some fine looking rifles. I think i may need to hide my wallet before I go spend a lot more then any sane or reasonalbe person should be allowed to
Link Posted: 5/8/2006 9:18:02 PM EDT
Does anyone know of a supplier of 25 round magazines for a 308 Galil AR? Just got my Galil 2 weeks ago & love it, but am short on hi cap magazines.
Link Posted: 5/18/2006 9:53:16 AM EDT
Link Posted: 5/18/2006 10:15:48 AM EDT

Originally Posted By osprey21:
img.photobucket.com/albums/v439/osprey21/GALIL_30Carbine1.jpg



there is no f'ing way you ahve one of those.   I've been praying for three years and YOU get it.  WTF?  
Link Posted: 5/24/2006 4:39:05 AM EDT

Originally Posted By chapperjoe:

Originally Posted By osprey21:
img.photobucket.com/albums/v439/osprey21/GALIL_30Carbine1.jpg



there is no f'ing way you ahve one of those.   I've been praying for three years and YOU get it.  WTF?  



Where the Hell did he get that!?

Link Posted: 5/24/2006 8:36:35 AM EDT

Originally Posted By NME:

Originally Posted By chapperjoe:

Originally Posted By osprey21:
img.photobucket.com/albums/v439/osprey21/GALIL_30Carbine1.jpg



there is no f'ing way you ahve one of those.   I've been praying for three years and YOU get it.  WTF?  



Where the Hell did he get that!?




someone had to go on his knees under the desk to get that.  I wojnder if barrett imports them for LEO work?
Link Posted: 7/9/2006 11:36:06 PM EDT
hey....what did I miss?
Link Posted: 8/8/2006 1:36:22 AM EDT
Some more pics of my Galil AR... hard to believe I've had this rifle for almost 20 years now!




Link Posted: 8/12/2006 7:39:34 PM EDT
Question for JimTash
Is that a SBR or the real deal class 3?
Link Posted: 8/13/2006 7:31:14 AM EDT

Originally Posted By BrotherO:
Question for JimTash
Is that a SBR or the real deal class 3?


It's an SBR. If the '86 ban does goes away though, you better believe that it will be made into a full auto in a heartbeat. The same goes for my other SBR's.
Link Posted: 8/13/2006 4:49:57 PM EDT
Thank You Jim, I really love your galil, been trying to locate one myself...What are the chances the ban going away? Would that drive down some prices? I see here how crazy the prices have gotten on class 3.

www.subguns.com/classifieds/index.cgi?db=nfafirearms&website=&language=&session_key=&search_and_display_db_button=on&results_format=long&db_id=8130&query=retrieval
Link Posted: 8/13/2006 5:02:43 PM EDT
[Last Edit: 8/13/2006 5:03:18 PM EDT by jimtash9]
I don't see the ban disappearing for a while if ever. What really gets me is the fact that I went through the same hoops for an SBR as I would have for a full auto. What a bunch of crap.
Link Posted: 8/13/2006 5:38:31 PM EDT
Yeah I can imagine how that is. That is what gets me is that all the paperwork and the wait and dont really know how much something like yours would run me..
Thanks Jim, I really appreciate your help..
Link Posted: 9/4/2006 7:29:38 PM EDT
ORF clone


Link Posted: 10/3/2006 5:55:04 PM EDT
My new Galil ARM




Link Posted: 10/27/2006 1:19:17 PM EDT
[Last Edit: 10/27/2006 8:04:55 PM EDT by pbrstreetgang]
i'll play.

i got worked-up and decided to be a show-off...
galil ARM and accessories- pretty much everything i have except more mags and uniforms. as you can see, i'm ready for the next intifada, though most of my neighbors are Indian- and already know i'm crazy.
the AR will eventually be made into a SAR. at the bottom you can see the parts i have collected thus far. i need a gasblock yet. if you have one, drop me an email.
otherwise i will be forced to destroy the barrel and re-work the one i have on the gun.



the ARM is an action arms. i got it in new condition, still covered in cosmo, with very light handling wear and no evidence of carbon on the piston. just no box. i swapped the handguard retainer for one with the carry-handle removed, and the flashider for the slotted military one. i missed out on a new handguard- one not cut for the carry handle- on ebay. pretty much the last part i needed to represent a late production galil as used by IDF. i hope the guy who sniped it enjoys it.

the AR started as a 16" ARM. its an 'S' model, so i have no fear of destroying it's value
i look forward to returning it's israeli made parts after it becomes an SBR. too bad there is no such thing as a transferable ak conversion sear, i bet they're fun in full-auto.



someday...
Link Posted: 11/14/2006 9:38:41 PM EDT

Originally Posted By pbrstreetgang:
i'll play.
www.imagestation.com/picture/sraid217/p2a408c8dcbd0a41388d0e09adfa407a9/ec53db2b.jpg
i got worked-up and decided to be a show-off...
galil ARM and accessories- pretty much everything i have except more mags and uniforms. as you can see, i'm ready for the next intifada, though most of my neighbors are Indian- and already know i'm crazy.
the AR will eventually be made into a SAR. at the bottom you can see the parts i have collected thus far. i need a gasblock yet. if you have one, drop me an email.
otherwise i will be forced to destroy the barrel and re-work the one i have on the gun.

www.imagestation.com/picture/sraid217/p59fb685d98649815dea8f8fbdeec796b/ec549c24.jpg

the ARM is an action arms. i got it in new condition, still covered in cosmo, with very light handling wear and no evidence of carbon on the piston. just no box. i swapped the handguard retainer for one with the carry-handle removed, and the flashider for the slotted military one. i missed out on a new handguard- one not cut for the carry handle- on ebay. pretty much the last part i needed to represent a late production galil as used by IDF. i hope the guy who sniped it enjoys it.

the AR started as a 16" ARM. its an 'S' model, so i have no fear of destroying it's value
i look forward to returning it's israeli made parts after it becomes an SBR. too bad there is no such thing as a transferable ak conversion sear, i bet they're fun in full-auto.

www.imagestation.com/picture/sraid217/pb2d3559c9d5789cc6896902f00c1a08e/ec53e988.jpg

someday...


There is such a thing as a transferable AK sear, but they're all permanently installed in host guns .  I had a Valmet M78 converted to full auto by Fleming that used a registered sear.
Link Posted: 11/15/2006 1:24:56 PM EDT

Originally Posted By arporro:
There is such a thing as a transferable AK sear, but they're all permanently installed in host guns .  I had a Valmet M78 converted to full auto by Fleming that used a registered sear.


i should have said "for me".

i turned 19 in may of '86. i've been playing catch-up ever since.
Link Posted: 11/21/2006 2:29:29 PM EDT
I`ve always wanted a Galil. Wish someone would make a US made Galil.
Link Posted: 12/23/2006 11:27:19 AM EDT

Originally Posted By jimtash9:
My MAR built by ORF on an IMI receiver.


www.image4u.org/jimtash/2003_0101Image0002.JPG

www.image4u.org/jimtash/2003_0101Image0003.JPG

www.image4u.org/jimtash/2003_0101Image0005.JPG

www.image4u.org/jimtash/2003_0101Image0007.JPG




Link Posted: 12/23/2006 10:08:58 PM EDT
My Galils built with Century kits on ORF receivers

Link Posted: 12/23/2006 11:01:04 PM EDT

Originally Posted By TURRICAN:
My Galils built with Century kits on ORF receivers



Who did the builds? Is the top a 16" and bottom a 18"?
Link Posted: 12/23/2006 11:28:39 PM EDT
The galils were built here in Az by "Big50hk".

Yes one 16 and one 18.
Link Posted: 2/26/2007 11:15:18 PM EDT
Recently built as an AR on an ARM platform. I added the bipod, handguards and carry handle with retainer.

Link Posted: 3/12/2007 1:45:21 AM EDT
[Last Edit: 3/12/2007 1:46:05 AM EDT by tapeo1]
New pics of my old Galil AR.  She turns 20 this year.

Link Posted: 4/9/2007 8:51:20 PM EDT







Link Posted: 4/23/2007 10:10:20 AM EDT
height=8
Originally Posted By Ugh:
<center><table width=85% border=0><tr><td width=100% class=textQuote><hr height=1px color=black noshade>Originally Posted By Manx:
It's not an IMI Galil, but a South African R5 with modern accessories.

i22.photobucket.com/albums/b348/bravo551/R5withHWS.jpg

<hr height=1px color=black noshade>

Very Nice!  Was it built in South Africa or did you find R5 parts and build them up on a Galil receiver.

Is the bulge on the gas tube or the gas block.  I've never seen either like that.

Where did you get the rail?


here is a video of me shooting my South african police force issued R5 with red dot! not a good quality but still a nice vid. i would love to get some of the extras avaliable in the us!s163.photobucket.com/albums/t282/jar_head_album/SAPS/?action=view¤t=sitingtheR5.flv
Link Posted: 6/13/2007 2:19:20 PM EDT
I just want to say that I have looked at all 4 pages of this thread and I must say I have never seen so many nice Galils!
Link Posted: 6/17/2007 4:33:44 AM EDT
[Last Edit: 6/17/2007 4:42:02 AM EDT by KCMojo]




















Link Posted: 8/16/2007 8:15:54 PM EDT
Link Posted: 9/7/2007 12:56:02 AM EDT
WoW...Chapperjoe in VA, that is a nice gun....the rest of you guys have some sweet set ups too.
Link Posted: 10/27/2007 4:14:11 PM EDT
I wish I had one
Link Posted: 12/10/2007 5:30:33 PM EDT
Greetings from Italy!
I was viewing at the site with a friend of mine who is a Galil 308 owner.He is interested in the mount present in the last photo of your post;please,could you tell who is the maker and where is possible to get it?Thanks.
Link Posted: 12/25/2007 5:36:21 AM EDT

Originally Posted By ARpilot:
Greetings from Italy!
I was viewing at the site with a friend of mine who is a Galil 308 owner.He is interested in the mount present in the last photo of your post;please,could you tell who is the maker and where is possible to get it?Thanks.


Google is everyone's friend

http://www.mountsplus.com/miva/merchant.mvc?page=MSP/PROD/GALIL_MOUNTS/PRI-CUS-GAL

http://www.mwgco.com/Merchant2/merchant.mvc?page=MWG/PROD/PRI-CUS-GAL



Link Posted: 1/12/2008 9:32:30 PM EDT
Link Posted: 2/12/2008 1:12:33 PM EDT
A plain... NIB IMI Galil... given as a gift about 25 years ago....

http://i231.photobucket.com/albums/ee196/blacknumbers/IMG_0254.jpg
Link Posted: 3/17/2008 4:05:45 PM EDT
Posted in the General AK picture thread, thought they would be appreciated here more.

Not mine, member GenLee's





Link Posted: 3/30/2008 9:06:00 AM EDT




Page / 7
Top Top