Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 7/20/2003 12:43:34 PM EST
Recently I bought the 5 piece American made FCG, black pistol grip, and gas piston from Tapco. Today I put it all together except that I can't get the gas piston loose from the charging handle. Is there any trick I should know about? BTW it's a Mak90 I'm converting to a pistol grip. Please help if you can, Thanks
Link Posted: 7/20/2003 1:19:11 PM EST
Link Posted: 7/20/2003 1:33:05 PM EST
Thanks Campy I found the pin you're talking about. Going to try to get it out. Do you know what other parts I need[if any]to make this compliant?
Link Posted: 7/20/2003 1:50:11 PM EST
Link Posted: 7/20/2003 1:56:43 PM EST
No muzzle device yet. Any suggestions?
Link Posted: 7/20/2003 3:15:30 PM EST

Originally Posted By rebelscum:
No muzzle device yet. Any suggestions?

If I did not want the follow up speed for plate shoots, I would not have one. But I am happy with the parts from ak-103.com/akusa for $50.50 delivered. US made bits, muzzle adaptor fits down the bbl, brake spins on, line up and weld them to the front sight base (easy to dremel off if needed without abusing bbl). Design is very true to the original, except for not chrome lined, 7.62 bore, and comes bare metal. My Alumahyde is not holding up at the ports, so I suggest having it parked and painted first, then wire wheeled where it needs welded, then touched up on the outside.
Top Top