Warning

 

Close
Confirm Action

Are you sure you wish to do this?

Cancel Confirm
AR15.COM
7/18/2026 8:38:00 PM EDT
[Last Edit: BlackdogADV][Edited]
Went to the range today with a new budget Chinese scope mounted on my Savage 93R17.  It’s a Mueller APV 4.5-14X40 with adjustable parallax, I think I paid $125 for it.  At 100 yards the target was blurry when set for that distance but would sharpen up when dialed to 200 yards.  
I have a Vortec PST with side focus that’s right on.
I’ll set it up and check for parallax later on as I’m not sure if it’s parallax free at 100 or 200 yards.
Any of you experienced this before?
Do epic shit.
7/18/2026 9:54:34 PM EDT
[#1]
Whether the number on the knob corresponds with the distance is not relevant. A lot of scope mfr don't put numbers now because too many people complain it doesn't exactly match.

What is important that the target is in focus and the parallax has been eliminated.
7/18/2026 9:57:34 PM EDT
[#2]
Originally Posted By BlackdogADV:

I’ll set it up and check for parallax later on as I’m not sure if it’s parallax free at 100 or 200 yards.
View Quote


???

Why didn't you check for parallax error right then and there at the range?
7/19/2026 9:06:40 AM EDT
[#3]
Quote History
Originally Posted By smoothy8500:
Whether the number on the knob corresponds with the distance is not relevant. A lot of scope mfr don't put numbers now because too many people complain it doesn't exactly match.

What is important that the target is in focus and the parallax has been eliminated.
View Quote

7/19/2026 9:08:46 AM EDT
[#4]
Quote History
Originally Posted By smoothy8500:
Whether the number on the knob corresponds with the distance is not relevant. A lot of scope mfr don't put numbers now because too many people complain it doesn't exactly match.

What is important that the target is in focus and the parallax has been eliminated.
View Quote


At the same time.  That seldom occurs with cheap scopes.

Keep your powder dry, and watch your back trail.
7/19/2026 12:38:48 PM EDT
[Last Edit: smoothy8500][Edited] [#5]
Quote History
Originally Posted By AeroE:


At the same time.  That seldom occurs with cheap scopes.

View Quote

True, cheap scopes there is no guarantee that everything works as expected.

To the OP:
On occasion even with quality scopes if the diopter (reticle focus) is not properly set first, there can be a slight mismatch of target focus and parallax correction. Not talking about the numbers on the knob, but what you are seeing inside the scope.
7/20/2026 12:51:37 AM EDT
[#6]
I went to the range again today and paid special attention to adjusting the parallax perfectly.  At 100 yards the target was blurry with the scope set at 100.  I adjusted the scope to 200, that sharpened the target considerably but I still had a bit of parallax.  I adjusted the scope to 300 yards and it was perfect, no parallax!  
This was my first budget scope purchase, I use the Vortex Viper PST scopes on my more serious rifles and never had an issue with parallax.
Do epic shit.
7/20/2026 9:17:42 AM EDT
[Last Edit: smoothy8500][Edited] [#7]
Ignore the numbers on the knob.

Learn to just adjust knob until parallax is removed.

Sign up to continue the discussion

Create a free account to share your thoughts, follow topics, and connect with the AR15.COM community.

Already a member? Sign In