Warning

 

Close
Confirm Action

Are you sure you wish to do this?

Cancel Confirm
AR15.COM
3/28/2020 9:11:20 AM EDT
I recently picked up a Noreen ULR50 and I'm looking for a mount for my optic. Its an Athlon ares btr2 4.5-27 with 24 Mil total elevation. I was thinking of getting a 30 MOA mount but most mounts I see are 20 MOA. I saw that ADM has a 30 MOA bolt gun mount but I've read about issues with vertically split rings.

https://www.americandefensemanufacturing.com/view/product/641/

Any issues with this mount or should I look elsewhere? Also am I wrong for looking for 30 MOA instead of 20? Locally my longer ranges are 600-1k but I travel to a spot a few times a year where I can shoot as far as I want and want to be able to stretch its legs when I get the chance.
3/28/2020 9:35:00 AM EDT
[#1]
Originally Posted By thesystem:
I recently picked up a Noreen ULR50 and I'm looking for a mount for my optic. Its an Athlon ares btr2 4.5-27 with 24 Mil total elevation. I was thinking of getting a 30 MOA mount but most mounts I see are 20 MOA. I saw that ADM has a 30 MOA bolt gun mount but I've read about issues with vertically split rings.

https://www.americandefensemanufacturing.com/view/product/641/

Any issues with this mount or should I look elsewhere? Also am I wrong for looking for 30 MOA instead of 20? Locally my longer ranges are 600-1k but I travel to a spot a few times a year where I can shoot as far as I want and want to be able to stretch its legs when I get the chance.
View Quote


I would not put anything QD on a .50. Get a good bolt on mount. Also the vertical split rings are a pain in the ass.

30 MOA is fine. The scope has enough internal elevation. That said if I could only find a good 20 MOA mount I would get it over a QD. How much MOA does the base on the rifle have?
3/28/2020 10:16:57 AM EDT
[Last Edit: thesystem][Edited] [#2]
They offer it in 0 and 30 moa. I need to call them on Monday and find out which this is as I picked it up used and didn't ask the seller at the time. The Athlon also has 10 mils in the reticle, (Christmas tree stlye) so that will add to the available elevation as well.
3/28/2020 10:29:49 AM EDT
[#3]
Quote History
Originally Posted By Rob01:
I would not put anything QD on a .50. Get a good bolt on mount. Also the vertical split rings are a pain in the ass.
View Quote

Correct
Man is born crying. When he has cried enough, he dies.
3/28/2020 11:38:06 AM EDT
[#4]
Quote History
Originally Posted By thesystem:
They offer it in 0 and 30 moa. I need to call them on Monday and find out which this is as I picked it up used and didn't ask the seller at the time. The Athlon also has 10 mils in the reticle, (Christmas tree stlye) so that will add to the available elevation as well.
View Quote


So why are you asking about it if you already bought it? Lol just watch for any issues with movement. Also look on the base. They usually mark them on there somewhere as to what moa they are. Look on the bottom too.
3/28/2020 1:31:56 PM EDT
[#5]
Sorry, I was talking about the rail being 0 or 30 moa. I have the rifle and optic but not the mount.
3/28/2020 2:37:37 PM EDT
[#6]
Check the rail itself on the rifle. Like mounts most are marked. You might have to take it off and check the bottom though.

What's your price range for a mount?
3/28/2020 7:27:41 PM EDT
[#7]
I'd like to keep it under 300. I'll pop off the rail and take a look. That's a good point as if it's a 30 moa rail I'll likely just go with some rings.
3/29/2020 9:51:57 PM EDT
[#8]
No luck on popping the rail off. It's unmarked which I hope means it's a 0. I'll give them a call and see if I can find out more.
3/30/2020 8:50:22 AM EDT
[#9]
Yup find that out first and then go from there.
3/30/2020 1:31:26 PM EDT
[#10]
Ok so talked to them, they said if it's blank it's a zero and otherwise it's engraved on the bottom so looks like I'm at 0 MOA.
7/24/2020 9:20:38 PM EDT
[#11]
I run Nightforce Unimounts on several rifles and they've been good to go.
Ellen; Clark, I think it'd be best if everyone went home... before things get worse.
Clark; WORSE? How could things get any worse? Take a look around here, Ellen. We're at the threshold of hell.
8/28/2020 9:59:54 PM EDT
[#12]
Thanks thats what I wound up with!