UDE Pmags (Page 1 of 2)
Posted: 10/28/2015 4:38:26 PM EDT
|
Will they ever be seen again? I'm noticing some UDE lancers in the various threads about the UDE rifles.
I'm asking because my LT lower and stealth are at the smith right now getting their own UDE treatment. I've got three UDE Pmags but I'd like a few more, I'd be more than happy with a few lancers too. |
|
Originally Posted By esa17: Will they ever be seen again? I'm noticing some UDE lancers in the various threads about the UDE rifles. I'm asking because my LT lower and stealth are at the smith right now getting their own UDE treatment. I've got three UDE Pmags but I'd like a few more, I'd be more than happy with a few lancers too. |
NRA life member
U.S. Navy veteran
New Mexico State University 2013
"Some aim to please, I shoot to kill"
U.S. Navy veteran
New Mexico State University 2013
"Some aim to please, I shoot to kill"
| I have seen UDE pmags go up every now and then for sale. I grabbed several last time I saw them. IIRC, ML said there was a possibility of UDE Lancers being offered. |
"I'd vote for a Magic 8 Ball or a Chia Pet before casting a vote for Lindsey Graham." ~Brohawk
Proud member of Team Ranstad.
Proud member of Team Ranstad.
|
Originally Posted By d16man:
I have seen UDE pmags go up every now and then for sale. I grabbed several last time I saw them. IIRC, ML said there was a possibility of UDE Lancers being offered. The UDE rifles shipped with a UDE Lancer mag. I would think they would sell them at some point. |
http://www.pbase.com/dclark
|
Originally Posted By M4-AR:
I've been attempting to make my own using rit dye, just need to tweak the brown/tan levels a bit. If you get a fairly decent match, would you mind posting up the mix ratio? Are you using a Sand mag as a base? |
I hated going to weddings. All the grandmas would poke me and say "You're next". They stopped that when I started doing it to them at funerals.
|
Originally Posted By M4-AR: I've been attempting to make my own using rit dye, just need to tweak the brown/tan levels a bit. I also think that an actual purchasable cerakote color or a place to send in your stuff to coat would be great too. |
"There has never been a sadness that can't be cured by breakfast food" - Ron Swanson
|
Originally Posted By 50cal:
If you get a fairly decent match, would you mind posting up the mix ratio? Are you using a Sand mag as a base? Originally Posted By 50cal:
Originally Posted By M4-AR:
I've been attempting to make my own using rit dye, just need to tweak the brown/tan levels a bit. If you get a fairly decent match, would you mind posting up the mix ratio? Are you using a Sand mag as a base? Will do, I'm going to take a run at it this weekend, the weathers gonna rep me indoors anyways. Eta: yes, sand pmags. So far I'm using pearl grey(base color), brown/yellow to make a dark tan and a splash of dark blue. |
PSN: Dikler
|
I need to be able to buy "Cerakote UDE - LaRue Tactical" online like the Magpul colors LOL. |
NRA Life Benefactor
LaRue UDE Edition #4
LaRue Costa Edition #441
LaRue PredatOBR 7.62 16.1" w/ NightForce NXS 3.5-15X50
Barrett MRAD .338 Lapua Mag. w/ NightForce BEAST 5-25X56 F1
LaRue UDE Edition #4
LaRue Costa Edition #441
LaRue PredatOBR 7.62 16.1" w/ NightForce NXS 3.5-15X50
Barrett MRAD .338 Lapua Mag. w/ NightForce BEAST 5-25X56 F1
|
Icon Grey FTW.  Originally Posted By anthonymarek:
I need to be able to buy "Cerakote UDE - LaRue Tactical" online like the Magpul colors LOL. Posted Via AR15.Com Mobile |
|
I have a pint of UDE gun coat on the way. I will coat some mags, a stock and a couple other things and post them here laying beside my UDE rifle. If 100% match, I will sell Lancer and P-Mags in UDE to fill the void. This is a two part, heat cured gun coating system, not paint or dye. If there is an interest in this still, post a reply below. Thanks. |
NRA Life Benefactor
LaRue UDE Edition #4
LaRue Costa Edition #441
LaRue PredatOBR 7.62 16.1" w/ NightForce NXS 3.5-15X50
Barrett MRAD .338 Lapua Mag. w/ NightForce BEAST 5-25X56 F1
LaRue UDE Edition #4
LaRue Costa Edition #441
LaRue PredatOBR 7.62 16.1" w/ NightForce NXS 3.5-15X50
Barrett MRAD .338 Lapua Mag. w/ NightForce BEAST 5-25X56 F1
| Lauer's sells a color matched UDE, and you can get it in the duracoat aerosol. I forget which member here sent in some index clips to get them to match it.... |
"I'd vote for a Magic 8 Ball or a Chia Pet before casting a vote for Lindsey Graham." ~Brohawk
Proud member of Team Ranstad.
Proud member of Team Ranstad.
|
Icon Grey is pretty damn close! I'm sure it looks better in person. Photos some times are not accurate to the eye. Just to clarify where I am coming from though, I just got off the phone with the company that makes the coatings that LaRue uses. I can get the exact UDE and the exact FDE of my Costa special edition rifles. Not everyone is a Cerakote applicator or has the equipment to do it. I am just an option if anyone has interest. |
NRA Life Benefactor
LaRue UDE Edition #4
LaRue Costa Edition #441
LaRue PredatOBR 7.62 16.1" w/ NightForce NXS 3.5-15X50
Barrett MRAD .338 Lapua Mag. w/ NightForce BEAST 5-25X56 F1
LaRue UDE Edition #4
LaRue Costa Edition #441
LaRue PredatOBR 7.62 16.1" w/ NightForce NXS 3.5-15X50
Barrett MRAD .338 Lapua Mag. w/ NightForce BEAST 5-25X56 F1
|
Originally Posted By anthonymarek:
Icon Grey is pretty damn close! I'm sure it looks better in person. Photos some times are not accurate to the eye. Just to clarify where I am coming from though, I just got off the phone with the company that makes the coatings that LaRue uses. I can get the exact UDE and the exact FDE of my Costa special edition rifles. Not everyone is a Cerakote applicator or has the equipment to do it. I am just an option if anyone has interest. And how much would you charge for this service? 
|
NWRA - NYSRPA - GOA - NRA Life Member - SAF Life Member
|
Originally Posted By Shqype: And how much would you charge for this service? Originally Posted By Shqype: Originally Posted By anthonymarek: Icon Grey is pretty damn close! I'm sure it looks better in person. Photos some times are not accurate to the eye. Just to clarify where I am coming from though, I just got off the phone with the company that makes the coatings that LaRue uses. I can get the exact UDE and the exact FDE of my Costa special edition rifles. Not everyone is a Cerakote applicator or has the equipment to do it. I am just an option if anyone has interest. And how much would you charge for this service? Unsure at this time. I would need to cover the product cost and a little for my time. I have a full time job and cerakote as a hobby plus doing my own stuff. It is a time consuming job and would not be worth it for just a few magazines. Let me get the coating in and do a few, then I will let you know. If the demand was high, the price would be low... I guess.  |
NRA Life Benefactor
LaRue UDE Edition #4
LaRue Costa Edition #441
LaRue PredatOBR 7.62 16.1" w/ NightForce NXS 3.5-15X50
Barrett MRAD .338 Lapua Mag. w/ NightForce BEAST 5-25X56 F1
LaRue UDE Edition #4
LaRue Costa Edition #441
LaRue PredatOBR 7.62 16.1" w/ NightForce NXS 3.5-15X50
Barrett MRAD .338 Lapua Mag. w/ NightForce BEAST 5-25X56 F1
|
Originally Posted By Harley1: I've got a bunch of UDE Pmags NIW. IM me if interested... Well, I sprayed a large hunting knife and a Lancer mag and the KG Gun Kote UDE is the coating on the rifles. I like the color so much that I am doing an AR in UDE, FDE and Benchmade Coyote Tan camo right now. It should look good together |
NRA Life Benefactor
LaRue UDE Edition #4
LaRue Costa Edition #441
LaRue PredatOBR 7.62 16.1" w/ NightForce NXS 3.5-15X50
Barrett MRAD .338 Lapua Mag. w/ NightForce BEAST 5-25X56 F1
LaRue UDE Edition #4
LaRue Costa Edition #441
LaRue PredatOBR 7.62 16.1" w/ NightForce NXS 3.5-15X50
Barrett MRAD .338 Lapua Mag. w/ NightForce BEAST 5-25X56 F1
|
Originally Posted By esa17:
Icon gray Cerakote is a spot on match for UDE. <a href="http://s44.photobucket.com/user/jfcoggins/media/B08E22D9-C989-44E5-8543-AF4B54C0C00C_zpsyf2kcvcg.jpg.html" target="_blank">http://i44.photobucket.com/albums/f23/jfcoggins/B08E22D9-C989-44E5-8543-AF4B54C0C00C_zpsyf2kcvcg.jpg</a> <a href="http://s44.photobucket.com/user/jfcoggins/media/0EB7873D-B884-4B44-8D81-9384C05045BB_zps93u5mbgl.jpg.html" target="_blank">http://i44.photobucket.com/albums/f23/jfcoggins/0EB7873D-B884-4B44-8D81-9384C05045BB_zps93u5mbgl.jpg</a> Originally Posted By esa17:
Originally Posted By anthonymarek:
I have a pint of UDE gun coat on the way. I will coat some mags, a stock and a couple other things and post them here laying beside my UDE rifle. If 100% match, I will sell Lancer and P-Mags in UDE to fill the void. This is a two part, heat cured gun coating system, not paint or dye. If there is an interest in this still, post a reply below. Thanks. Icon gray Cerakote is a spot on match for UDE. <a href="http://s44.photobucket.com/user/jfcoggins/media/B08E22D9-C989-44E5-8543-AF4B54C0C00C_zpsyf2kcvcg.jpg.html" target="_blank">http://i44.photobucket.com/albums/f23/jfcoggins/B08E22D9-C989-44E5-8543-AF4B54C0C00C_zpsyf2kcvcg.jpg</a> <a href="http://s44.photobucket.com/user/jfcoggins/media/0EB7873D-B884-4B44-8D81-9384C05045BB_zps93u5mbgl.jpg.html" target="_blank">http://i44.photobucket.com/albums/f23/jfcoggins/0EB7873D-B884-4B44-8D81-9384C05045BB_zps93u5mbgl.jpg</a> That looks great! I like how the dust cover door and handguard nut were left black. |
|
Originally Posted By esa17:
Where do you see the 10rd limit? The site says they are 30 rounders. I just checked the LT site and it says they are 10 round capacity with 30 round body. Hopefully the 30 rounders are coming soon. EDIT: I see the 30 rounders now. http://www.larue.com/ude-lancer-l5-awm-556-30-round-magazine |
|
Originally Posted By Iakona:
http://www.larue.com/ude-lancer-l5-awm-556-30-round-magazine Originally Posted By Iakona:
Originally Posted By ozzie839:
I still only see the 10/30s??? http://www.larue.com/ude-lancer-l5-awm-556-30-round-magazine http://www.larue.com/ude-lancer-l5-awm-556-30-round-magazine Got my order in on those. They'll be my first non-Pmag or USGI mags. |
|
Here is the 10/30s
http://www.larue.com/ude-lancer-l5-awm-556-1030-magazine |
"Some people have issues. Sounds like he signed up for an entire subscription." ~Brohawk
Proud member of Team Ranstad.
Proud member of Team Ranstad.
|
Originally Posted By esa17:
http://www.larue.com/ude-lancer-l5-awm-556-30-round-magazine Got my order in on those. They'll be my first non-Pmag or USGI mags. Originally Posted By esa17:
Originally Posted By Iakona:
Originally Posted By ozzie839:
I still only see the 10/30s??? http://www.larue.com/ude-lancer-l5-awm-556-30-round-magazine http://www.larue.com/ude-lancer-l5-awm-556-30-round-magazine Got my order in on those. They'll be my first non-Pmag or USGI mags. Thanks, I didn't add the URL. I appreciate it. I also got my order in too, been waiting for a while for these. I have the smoke and love them but got new UDE furniture for my tOBR. |
Certified Sig Armorer-Classic Pistols
Joined:
Mar 2008
Posts:
1651
EE: 100% (245)
MI, USA
|
Originally Posted By MSC182:
Once again this place costs me money. Boy, Do I know how you feel. Just ordered a dozen. |
NRA Benefactor Member, Veteran; US Army 5th Corps 1970-1972
The only time in my life when I got to Rock-N-Roll, and the ammo was free!!
(Avatar is the Unit's shoulder patch)
The only time in my life when I got to Rock-N-Roll, and the ammo was free!!
(Avatar is the Unit's shoulder patch)
|
Originally Posted By snakeman48:
Boy, Do I know how you feel. Just ordered a dozen. Originally Posted By snakeman48:
Originally Posted By MSC182:
Once again this place costs me money. Boy, Do I know how you feel. Just ordered a dozen. Got my shipping notice today. I hope the UDE mags stay as a stocked item. On the subject of the 10/30 lancers, does anyone know if there is a structural difference between them and the 30 rounders other than the rivet? |
Certified Sig Armorer-Classic Pistols
Joined:
Mar 2008
Posts:
1656
EE: 100% (245)
MI, USA
|
Originally Posted By d1jinx:
My ude lancers went BO 
you fuckers cleaned them out. 
Sorry about that.............well not really...
Mine are shipping today also. Got notice this morning. |
NRA Benefactor Member, Veteran; US Army 5th Corps 1970-1972
The only time in my life when I got to Rock-N-Roll, and the ammo was free!!
(Avatar is the Unit's shoulder patch)
The only time in my life when I got to Rock-N-Roll, and the ammo was free!!
(Avatar is the Unit's shoulder patch)
|
Originally Posted By thmpr:
Receiving Hera Polymer Mags from Lan World to try. As soon as I receive mags, I will post some pics. I heard from a few members that it is close to the UDE. https://www.lanworldinc.com/index.php/magazines/30-round-magazines I'm interested but skeptical. |
Certified Sig Armorer-Classic Pistols
Joined:
Mar 2008
Posts:
1660
EE: 100% (245)
MI, USA
|
If I don't use my Lancers, my other go to mags are ETS.
http://www.etsgroup.us/ETS-Group-AR15-Magazines-s/1814.htm They are a member on the sight in the Industry section, and have offered ARFCOM members discounts from time to time. |
NRA Benefactor Member, Veteran; US Army 5th Corps 1970-1972
The only time in my life when I got to Rock-N-Roll, and the ammo was free!!
(Avatar is the Unit's shoulder patch)
The only time in my life when I got to Rock-N-Roll, and the ammo was free!!
(Avatar is the Unit's shoulder patch)
|
Originally Posted By esa17:
I think the Lancers match better than the Pmags! <a href="http://s44.photobucket.com/user/jfcoggins/media/5beefd33-cc62-41ae-8728-c66180aeaf69_zpsqhc1gn18.jpg.html" target="_blank">http://i44.photobucket.com/albums/f23/jfcoggins/5beefd33-cc62-41ae-8728-c66180aeaf69_zpsqhc1gn18.jpg</a> They look nice! I threw a couple in with my dillo order for Doug and they should be here tomorrow. |
LOTD & KOTD-E
NRA Benefactor
Do you need a band-aid Sir? I think I have Hello Kitty or Spongebob.
Let's don't let a little old Indian raid break up a good barbeque and a rodeo.
NRA Benefactor
Do you need a band-aid Sir? I think I have Hello Kitty or Spongebob.
Let's don't let a little old Indian raid break up a good barbeque and a rodeo.
|
Originally Posted By PraesulPresul1:
So is Larue's UDE close to Magpul's Foliage with the green pulled out and some gray added in? Pics against Magpul colors would help me visualize.  Found some pics on the other site and it appears above is about right - less green more gray. Actually might be any effective color in my area. |
UDE on the left, Foliage third one in.
 20150810_141310 by , on Flickr
|
Major Captain of Seaborne Party Operations for the North Atlantic Ocean
|
Originally Posted By esa17:
I think the Lancers match better than the Pmags! http://i44.photobucket.com/albums/f23/jfcoggins/5beefd33-cc62-41ae-8728-c66180aeaf69_zpsqhc1gn18.jpg |
|
UDE Pmags back in stock. If this is real, they are STUPID cheap. |