Posted: 11/27/2024 4:25:36 AM EDT
|
Looking to get a T3x Lite 308 (not fluted Superlite) on Black Friday sale. It is a stainless one that I want shorted to 16” and threaded 5/8x24 with a tapered shoulder added since barrel diameter is only about .675” at 16”. Your photo for the added tapered shoulder shows a blued one but assume you would do a stainless one correct? Instructions say to strip everything, trigger, scope, bolt and only send barreled action. Instructions also say barrel length measured from bolt face, so would I need to send bolt or you have a bolt you use to measure off for these? Thank you for your time. |
|
Originally Posted By Lgunsmoker: Looking to get a T3x Lite 308 (not fluted Superlite) on Black Friday sale. It is a stainless one that I want shorted to 16” and threaded 5/8x24 with a tapered shoulder added since barrel diameter is only about .675” at 16”. Your photo for the added tapered shoulder shows a blued one but assume you would do a stainless one correct? Instructions say to strip everything, trigger, scope, bolt and only send barreled action. Instructions also say barrel length measured from bolt face, so would I need to send bolt or you have a bolt you use to measure off for these? Thank you for your time. We do SS shoulders for SS barrels We dont need the bolt. |
I'm no good at telling people what they want to hear when I dont believe it myself :)