Posted: 1/26/2014 11:10:06 AM EDT
[Last Edit: Mike92GT][Edited]
| Purchased an Inforce WML from you guys back in October, sand color w/ momentary on only. Just wondering if there is a way to tell if it is the newer 200 lumen version, or the 125 lumen? Thanks |
| What's the serial number? I'll call INFORCE. It is supposed to be, as they cut over in March on all shipments. |
|
Thanks, that would be great. Serial number is C7132068. I was thinking the switch happend later in the year, so I wasn't sure which model I ended up with.
Originally Posted By MOUNT-N-SLOT:
What's the serial number? I'll call INFORCE. It is supposed to be, as they cut over in March on all shipments. |
|
From INFORCE:
"To determine if it is 200 or 125 Lumens, look at the LED. (light off of course) If the circuitry right around the LED is white, it is 200. If it is green it is the lower lumen." MOUNT-N-SLOT |
|
Originally Posted By Mike92GT:
Thanks! Sounds like it's the 200 then Of course... Happy to hear it is. We're listed at the top of their Procurement Page, with our Logo, as we're one of the Strategic Partners Haley used for the Jack Carbine by BCM. We only sell high quality top shelf name brand gear, or make it ourselves. |
| I was going to post a new question but I'll just ask here since the post is still somewhat recent... Just mounted this light today and started using it. When you press the switch for momentary use the light just kinda flickers and flashes. I have to apply a lot of pressure to get it to stay on. After a short time as my finger starts to fatigue a bit from the pressure, the light will go off, even though the button is still depressed. Are all these switches this hard to press? Seems like the light should come on steadily once you feel the "click" of the switch moving forward. I don't have another one to compare it to. As of now I don't think I can use this in it's current condition. Thanks for any input. |
[NO TEXT]
|
Originally Posted By Mike92GT:
I was going to post a new question but I'll just ask here since the post is still somewhat recent... Just mounted this light today and started using it. When you press the switch for momentary use the light just kinda flickers and flashes. I have to apply a lot of pressure to get it to stay on. After a short time as my finger starts to fatigue a bit from the pressure, the light will go off, even though the button is still depressed. Are all these switches this hard to press? Seems like the light should come on steadily once you feel the "click" of the switch moving forward. I don't have another one to compare it to. As of now I don't think I can use this in it's current condition. Thanks for any input. Your light has a momentary only switch. It needs constant pressure to stay lit, as there is no click to stay on / off function built into your light / switch. It does sound like it is functioning properly. Since it was purchased so long ago, call to discuss your options. 970.980.8378 MOUNT-N-SLOT |
| Thanks. I went ahead and emailed Inforce, they think the switch might be bad. I got an RMA so I'll go ahead and send it in. It only seems to come on if I use the tip of my thumb and press down HARD in the center of the switch. If I let up on the switch at all the light dims or goes out. If I try and depress the button with just the pad of my thumb the light just flickers. Seems like the swith requires way to much force to turn the light on and keep it on. |
[NO TEXT]