Posted: 1/27/2026 8:04:05 PM EDT
[Last Edit: kavants][Edited]
|
Any of you guys tried to install a Magpul PRS lite on a Larue LT-10? The stock is about 1/4" from the bottom. Magpul website says it should work on SR-25 type rifles. ETA: I should have done more research I guess. It seems the LT 7.62 buffer tube is made longer. The PRS Lite works on my 5.56 tAR. Oh well. 
|
|
It has been a while, but I think there is a kit you may need: https://www.larue.com/products/7-62-adapter-kit/ Seems like they used to sell a rifle length receiver extension with an adapter that let you use the carbine spring and buffer from the UU kit, but again it's been a while. |
|
Originally Posted By razARback: It has been a while, but I think there is a kit you may need: https://www.larue.com/products/7-62-adapter-kit/ Seems like they used to sell a rifle length receiver extension with an adapter that let you use the carbine spring and buffer from the UU kit, but again it's been a while. Yeah I found the kit you linked in the research I should have done ahead of time. It doesn't work with the PRS lite since its not compatible with rifle receiver extensions like the regujar PRS Gen 3. Not sure I want the PRS lite enough to replace the RE with a standard SR25 size. |
|
Hopefully these help. Fully assembled.  Cheek riser removed and LOP loosened.  Disassembled.  "Spacer" removed from stock tube. This actually conatins the tension mechanism for the cheek riser. Can't be shortened.  There is a hard stop in the tube limiting the length of RE that can be used. Designed for only carbine type RE's not rifle type. 
|
|
Originally Posted By mettee: https://media.tenor.com/XrJV15aM7TIAAAAM/cant-see-shit.gif How about now? |