Just a working concept (Page 1 of 6)
Posted: 11/3/2022 7:53:52 PM EDT
[Last Edit: esstac-][Edited]
 
|
|
Very simple design. And assembled very easy for the insertion and removal of the plates. Looking forward to see the different versions for the different plate cuts. It’s minimalist without actually being minimal. Lots of potential. |
Esstac’s Retarded Social Media Influencer
|
First bun pocket attempt. Daeo bun installed. Like the hinge top of the pocket. Commonality of parts (identical to the front) and makes adjustment changes quick. Pocket itself now that I have the dimensions correct needs cleaned up but I believe I'm on the correct path. Have no issues recycling the Daeo's buns for this. They are solid and strong and work extremely well and the adjuster does it job well and can be replaced when the elastic fails, it's elastic it's going to fail someday    
|
QC Doktor...soldier, scholar, funnyman, raconteur
Joined:
Feb 2001
Posts:
34171
EE: 0% (0)
AL, USA
|
Originally Posted By esstac-: First bun pocket attempt. Daeo bun installed. Like the hinge top of the pocket. Commonality of parts (identical to the front) and makes adjustment changes quick. Pocket itself now that I have the dimensions correct needs cleaned up but I believe I'm on the correct path. Have no issues recycling the Daeo's buns for this. They are solid and strong and work extremely well and the adjuster does it job well and can be replaced when the elastic fails, it's elastic it's going to fail someday https://www.ar15.com/media/mediaFiles/72956/PXL_20221106_093439085-2589507.jpg https://www.ar15.com/media/mediaFiles/72956/PXL_20221106_093453617-2589508.jpg https://www.ar15.com/media/mediaFiles/72956/PXL_20221106_093533554-2589509.jpg https://www.ar15.com/media/mediaFiles/72956/PXL_20221106_093602169-2589510.jpg Cool! |
"Audemus jura nostra defendere"
|
Originally Posted By esstac-: First bun pocket attempt. Daeo bun installed. Like the hinge top of the pocket. Commonality of parts (identical to the front) and makes adjustment changes quick. Pocket itself now that I have the dimensions correct needs cleaned up but I believe I'm on the correct path. Have no issues recycling the Daeo's buns for this. They are solid and strong and work extremely well and the adjuster does it job well and can be replaced when the elastic fails, it's elastic it's going to fail someday https://www.ar15.com/media/mediaFiles/72956/PXL_20221106_093439085-2589507.jpg https://www.ar15.com/media/mediaFiles/72956/PXL_20221106_093453617-2589508.jpg https://www.ar15.com/media/mediaFiles/72956/PXL_20221106_093533554-2589509.jpg https://www.ar15.com/media/mediaFiles/72956/PXL_20221106_093602169-2589510.jpg Edit. Nevermind. Transferred to a PM |
Esstac’s Retarded Social Media Influencer
|
Originally Posted By southerncross: Is this going to be an entirely new thing or is this an evolution of the Daeodon family? No clue yet. Just hit a point of an actual wearable/useable version on this. Minus some rando shit and I have none of the tegris hinge locks in the file yet but it's useable. Much cleaner than a Daeo but the Daeo's are multitaskers where this is a unitasker. Fits the plate it's made for but may fit other plates in the same family of sizing like large sapi but probably not as nicely as the brand/size it's made for. The good news is a few dimensional tweaks and it'll fit that other brand or slight variation of plate and is easy to do. This concept was just something I wanted to play with not expecting it to have gone this far down the rabbit hole. Trying some ideas out as a test to myself. |
Just sized the front for a 3810 10x12 shooters  Ranger is shooter front large sapi rear, 3810s Multicam is large sapi front/rear, 3810s   Both have pals rear and will work with the Daeo's hydro carrier. Tomorrow need to get medium sapi drawn up and cut and begin work on the dangler's hinge integration. Dangler's going to require some finesse as I do not want to make a new one with a longer hinge and want to run the existing hinged dangler, already had to do new front panels..... |
|
Originally Posted By esstac-: Just sized the front for a 3810 10x12 shooters https://www.ar15.com/media/mediaFiles/72956/PXL_20221109_015924849-2593150.jpg Ranger is shooter front large sapi rear, 3810s Multicam is large sapi front/rear, 3810s https://www.ar15.com/media/mediaFiles/72956/PXL_20221109_020340289-2593154.jpg https://www.ar15.com/media/mediaFiles/72956/PXL_20221109_020029628-2593156.jpg Both have pals rear and will work with the Daeo's hydro carrier. Tomorrow need to get medium sapi drawn up and cut and begin work on the dangler's hinge integration. Dangler's going to require some finesse as I do not want to make a new one with a longer hinge and want to run the existing hinged dangler, already had to do new front panels..... I want to try on that MC one with the large plates as a comparison to my current dadeon setup. |
Esstac’s Retarded Social Media Influencer
|
Originally Posted By esstac-: Fee minor tweaks. Added hinge locks except on the shoulder pads  . Hook Velcro on the shoulder thingys to keep them in place.And made this one in all the woodland https://www.ar15.com/media/mediaFiles/72956/PXL_20221110_015725428-2594354.jpg https://www.ar15.com/media/mediaFiles/72956/PXL_20221110_015741137-2594355.jpg https://www.ar15.com/media/mediaFiles/72956/PXL_20221110_015759582-2594356.jpg Fuck me. That one is so hot. |
I swear to God I'm going to pistol whip the next guy who says, " Shenanigans."
|
Originally Posted By esstac-: Fee minor tweaks. Added hinge locks except on the shoulder pads . Hook Velcro on the shoulder thingys to keep them in place.And made this one in all the woodland https://www.ar15.com/media/mediaFiles/72956/PXL_20221110_015725428-2594354.jpg https://www.ar15.com/media/mediaFiles/72956/PXL_20221110_015741137-2594355.jpg https://www.ar15.com/media/mediaFiles/72956/PXL_20221110_015759582-2594356.jpg I am now fully erect. |
Mom says I'm special
