Colt M7 7.62 (Page 5 of 5)
Member
Joined:
Nov 2022
Posts:
344
EE: 100% (17)
TX, USA
|
M5 on the left, M7 on the right with the cap to protect the teeth. Attached File |
 Colt M7 SASS. ????????? ?????????. ????????? ???????? 300-800 ??????. I was browsing some online gun shops in Ukraine and noticed that the M7 SASS seems to be selling better than I expected. If they focus on marketing and start offering it in the U.S., I think it could be quite successful. |
|
Originally Posted By Coalkoy:  https://www.youtube.com/watch?v=o3bgBiCnmGMI was browsing some online gun shops in Ukraine and noticed that the M7 SASS seems to be selling better than I expected. If they focus on marketing and start offering it in the U.S., I think it could be quite successful. I would love to see a translated version. I’m surprised they aren’t using the C20 from Colt Canada. |
Member
Joined:
Nov 2022
Posts:
357
EE: 100% (17)
TX, USA
) but it had zero functional issues and groups tightly as long as I do my part.
|
Originally Posted By MiamiSniper: Finally shot my M7 13.7 and it was flawless, really enjoyed the weapon, the trigger is a bit hard and the 13.7 barrel is loud, want opinions on what trigger to add and also what suppressor should I buy? I have 3 brand new triggers, which one should I choose? https://www.ar15.com/media/mediaFiles/21371/IMG_0672_jpeg-3343379.JPG What did you use for trigger pins? |
|
Originally Posted By quicksilvergoat04: If you need trigger pins Geissele makes some for the Colt 901 or did last I looked. You could also just use what came with the rifle. Thanks. I have a similar situation with my M5. The rumor is the Geissele 901 pins work but neither Colt or Geissele will ok them for use. And of course Geissele only recommends their pins with their triggers. |
|
These are listed back on AU's website, out of stock though, which I assume means they are awaiting a shipment. Both the 13" and 16" are listed, and the 16" is "on sale" for the same $2200 I purchased mine for last November. They ALSO have the 18" CSASS version listed, which I have not seen before. 
|
|
Originally Posted By Minuteman1636:CSASS is Canadian and for LE only. Production of the CM7 is on pause until late Q2 or early Q3 2026. Are you sure you aren't referring to the C20? They have had that listed in the past with the stipulations you mentioned, but it is based on the MRR and has a true monolithic M-lok upper instead of the keyed handguard setup that the M5 and M7 use. The CSASS was the Colt entrant to the Army CSASS (M110A1) trial against the H&K and KAC rifles. There is nothing on the product page to indicate that it is for LE only, and usually the LE only stuff they get like the Mk47 or the FN MTL-30 is listed at $0.00. The CSASS is listed at $2699.00. |
|
Are you sure you aren't referring to the C20? You are correct. My fault. When you said CSASS, my brain skipped to C20. I apologize for the confusion. In regards to CSASS, stand by to stand by. There may be something come up next year after M7 production kicks up. |
|
Originally Posted By Minuteman1636: You are correct. My fault. When you said CSASS, my brain skipped to C20. I apologize for the confusion. In regards to CSASS, stand by to stand by. There may be something come up next year after M7 production kicks up. Do you think there will be another run of M7's next year? (my gun fund is depleted for the year but I could start saving for an M7). |
|
Originally Posted By Milspec99: Thanks. I have a similar situation with my M5. The rumor is the Geissele 901 pins work but neither Colt or Geissele will ok them for use. And of course Geissele only recommends their pins with their triggers. If you read the M5 manual it states (for mil and leo I assume) "as well as an optional Geissele Super Select Fire (SSF) two stage trigger." - page 12 So someone knows something and they aren't saying anything. I just installed the SSA in my M5 with the G pins. I have not test fired it yet but the pin measurements are almost identical. The length is right on and I think I measured the G pins to be .002" wider/thicker. The G pins slide in and out of the receiver with no FCG installed so they are definitely not too tight. |
|
Originally Posted By Milspec99: If you read the M5 manual it states (for mil and leo I assume) "as well as an optional Geissele Super Select Fire (SSF) two stage trigger." - page 12 So someone knows something and they aren't saying anything. I just installed the SSA in my M5 with the G pins. I have not test fired it yet but the pin measurements are almost identical. The length is right on and I think I measured the G pins to be .002" wider/thicker. The G pins slide in and out of the receiver with no FCG installed so they are definitely not too tight. The M7 receiver is indentical to the 901 receiver. I have an SSA-E with G pins in mine |
|
Originally Posted By Minuteman1636: Yes, we will see M7 production in 2026. We may see parts available as well. If we see parts - I'll want a spare charging handle. Aside from a complete BCG, what else would you keep as a spare part? |
USMC 85-'93 Amphibious YAT-YAS
