Posted: 2/25/2022 2:45:59 PM EDT
| I'm trying to work around a p/w M4 barrel...considering the extended free float quad rail with the fsp cutout, but curious if the non-fsp cutout models would fit over a shaved fsp if I go that route. |
|
Originally Posted By cayman_shen: Looking at the 2 piece drop in free float that attaches to the standard barrel nut. Thanks for the pic above. Basically what I'm pondering. |
|
Originally Posted By JBecker_72: They have a bunch of choices that clamp on to the standard barrel nut. Quad rail and free floating. I've had good luck with mine. I have another rifle with a Centurion C4 that's very similar. The Centurion is an overall slimmer rail with more intricate machining, but ultimately more expensive. Both have worked well with a good amount of use at this point. Say my barrel nut had a few rounded over/worn teeth because an idiot installed it. Would that hurt the rail lockup? |
|
Originally Posted By cayman_shen: Say my barrel nut had a few rounded over/worn teeth because an idiot installed it. Would that hurt the rail lockup? Originally Posted By cayman_shen: Originally Posted By JBecker_72: They have a bunch of choices that clamp on to the standard barrel nut. Quad rail and free floating. I've had good luck with mine. I have another rifle with a Centurion C4 that's very similar. The Centurion is an overall slimmer rail with more intricate machining, but ultimately more expensive. Both have worked well with a good amount of use at this point. Say my barrel nut had a few rounded over/worn teeth because an idiot installed it. Would that hurt the rail lockup? That will not hurt lock up at all. Troy MI |
Midwest Industries Inc.
Quality Manufacturers of Tactical Rifles & Accessories
www.midwestindustriesinc.com
Quality Manufacturers of Tactical Rifles & Accessories
www.midwestindustriesinc.com