Warning

 

Close
Confirm Action

Are you sure you wish to do this?

Cancel Confirm
AR15.COM
6/27/2025 9:50:59 AM EDT
Local chain here (FIN Feather and Fur) is selling their 115gr 9mm for 8.99 a box.  Any thoughts?  See a lot of bad reviews.

Thanks
6/27/2025 10:44:03 AM EDT
[#1]
I never tried it either due to the bad reviews, but those were mostly on the .308 blowing up guns.
If life was easy nobody would quit.
6/27/2025 12:31:37 PM EDT
[#2]
I've shot several thousand rounds of the ZSR 115 grain FMJ.  I didn't have any QC problems with it like failures to fire, hang fires, or accuracy issues.  However, it is pretty weak.  The average velocity out of my 4.7" LTT 92G was 1040 fps.  That is really slow for 115 grain 9mm in a barrel that long.  It worked fine in the various 92s I tried it in.  However, it was unreliable in various Glocks (regular failures to eject and/or feed), and it wouldn't run at all in my Beretta APX A1.  It was just too weak to cycle the guns.  However, it ran fine in my open bolt SMGs for whatever reason.  So, we burned up the remaining stock of it I had at the Ohio SMG match two weeks ago.  No issues with it there.  I won't buy it again because of its performance in Glocks.  The Turkish 124 grain stuff seems to run in everything.
"The Engine could still smile...it seemed to scare them." -Felix
6/27/2025 2:41:00 PM EDT
[#3]
Dirty, nasty ammo.  I wouldn't buy it on a bet.  If you do buy it, just get one box & see how much dirtier your 9 is compared to normal.

6/27/2025 3:27:28 PM EDT
[#4]
Thanks guys.  I was going to pass on it anyhow but now for sure. Even at 8.99 a box not worth the hassle.
6/28/2025 12:08:08 AM EDT
[#5]
I've also shot about 2,000 of this ammo with decent results.

It's cheap.
7/6/2025 8:58:40 PM EDT
[Last Edit: Bravo_Six][Edited] [#6]
I've shot 10s of thousands of ZSR 9mm over the last few years.  It's fine for practice ammo.  The primers are slightly harder than common US brands.  It you're using a striker gun with a race trigger, you might get a very occassional light strike.  Otherwise, it runs fine for me.  I get 100% ignition in 1911s, CZ75, and M&P.  Glocks with light triggers are the only guns that I've seen with occassional light strikes.

As for relative power, they do not feel like light loads to me.  Blazer Brass shoots softer.  I clocked the 124 grain stuff at a hair over 1200 fps, but I don't recall chronoing the 115 grain load.  Edit: on second thought I'm not positive that the 124 grain stuff was ZSR.  It was definitely Monarch and made in Turkey, but it could have been that BPS headstamp.
7/17/2025 9:45:13 PM EDT
[#7]
I picked some up from Sportsman Fulfillment for like $8.50 a box a couple weeks ago. (sold out fast)

Quick Google search pulls up mixed reviews for rifle stuff, but 9mm seems to be fine. I don't care if it's dirty, I'm OCD about cleaning anyway. At $8.50 for new manufactured brass ammo, I'll roll the dice on 500 rounds and check it out.
7/25/2025 3:13:52 PM EDT
[#8]
Seems like there are a few different ZSR 9mms.  The one I posted about is made in Pakistan. There is also a ZSR 9 made in Turkey.  I have shot some of the Turkey but never the Pak stuff.
7/27/2025 6:52:43 PM EDT
[#9]
Quote History
Originally Posted By BB4XL:
Seems like there are a few different ZSR 9mms.  The one I posted about is made in Pakistan. There is also a ZSR 9 made in Turkey.  I have shot some of the Turkey but never the Pak stuff.
View Quote


Oh, I would definitely trust the Turkish more than the Pakistani lol
11/17/2025 11:19:58 AM EDT
[#10]
It is the one ammunition so far that has caused my M&Ps and Glocks to light primer hit rather easily. Early on I thought something was up with the pistols, but had friends experience the same thing in theirs. Apparently this happens rather often as I have seen similar comments when doing research. Other than that, I did not have issue, the ammo was free in my particular case. Certainly got real good with malfunction clearing when shooting that ammo.

Sign up to continue the discussion

Create a free account to share your thoughts, follow topics, and connect with the AR15.COM community.

Already a member? Sign In