Posted: 1/9/2026 8:35:15 PM EDT
|
I purchased a set of Armory Craft Actions Trigger Reduction Springs. It comes with: - Reduced Power (-25%) Sear Spring Set (2 springs) - Reduced Power (-50%) Sear Spring Set (2 springs) - Reduced Power Trigger Return Spring (-10%) x 1 - Reduced Power Trigger Return Spring (-20%) x 1 - Reduced Power Striker Safety Spring (-20%) x 1 AC Action springs Which springs would be best to use here? While I want to reduce the trigger pull weight, particularly at the wall, safety is paramount. Hoping it also might make the trigger feel less squeeshy. Also picked up a MCarbo flat trigger to help with the perceived trigger pull. Everything is dropping into a Flux Raider, so they have limitations on what can be installed. Flux said anything with an aftermarket trigger bar wont work in their kit and an adjustable trigger will likely not fit. Trigger shoe replacements were mostly good to go according to Flux. |
|
Disassemble the pistol. Polish the sear face and the striker contact pad. Attached File Attached File Measure the sear face height with a feeler gage. File and stone down until you reach .020" Attached File |
|
Originally Posted By Sinister: Disassemble the pistol. Polish the sear face and the striker contact pad. https://www.ar15.com/media/mediaFiles/18978/sear_height_jpg-3691299.JPG https://www.ar15.com/media/mediaFiles/18978/striker_contact_pad_jpg-3691302.JPG Measure the sear face height with a feeler gage. File and stone down until you reach .020" https://www.ar15.com/media/mediaFiles/18978/sear-striker_jpg-3691307.JPG +1 all the way Cp |
Presidents Hundred 2022-2024
US Army/ CMP Distinguished Pistol Shot 2015
US Army/ CMP Distinguished Rifle 2022
USAR Service Rifle Team and Service Pistol Team 2010-2025
US Army/ CMP Distinguished Pistol Shot 2015
US Army/ CMP Distinguished Rifle 2022
USAR Service Rifle Team and Service Pistol Team 2010-2025