Posted: 6/13/2026 7:29:41 PM EDT
|
I sent the frame off for cerakote and when I got it back, I installed a Lazy Wolf spring kit. During the function check, the trigger will not reset when you hold it back while cycling the slide. Took it apart, put the original springs back in and it does the same thing. Trigger spring is installed correctly. Any ideas? |
|
Originally Posted By mscout118: I sent the frame off for cerakote and when I got it back, I installed a Lazy Wolf spring kit. During the function check, the trigger will not reset when you hold it back while cycling the slide. Took it apart, put the original springs back in and it does the same thing. Trigger spring is installed correctly. Any ideas? @mscout118 check your trigger return spring. Its the wire spring on the right side of the frame. Its probably broken. |
|
Solved! I was looking in all the wrong places. Took it apart to closely examine the trigger bar spring and as soon as I pulled the right slide release I realized the trigger elbow spring short end was not sitting on the trigger. I have bad eyes and was using my super duper magnifiers with the light attached and caught it. I have taken this damn thing apart and reassembled it no less than 5 times trying to figure this out. |