[ARCHIVED THREAD] - Unissued LEO Trade-In Glock 45 MOS-5 RMR Cut Slide at AIM Surplus $600 (Page 1 of 2)
| After shipping and transfer its within a few dollars of a brand new in stock model at my LGSs, they should lower the price a tad. Even if they are unissued, that doesn’t make them brand new in the box, they should be $500-$550. I’m sure they’d still be making a nice profit at that price. |
|
Quoted: After shipping and transfer its within a few dollars of a brand new in stock model at my LGSs, they should lower the price a tad. Even if they are unissued, that doesn’t make them brand new in the box, they should be $500-$550. I’m sure they’d still be making a nice profit at that price. Probably cause they are direct milled mos. With the 620 that a regular mos goes for, you still need to buy a decent plate since the glock ones suck. |
|
Quoted: The first time we had ever seen them, I didn't know they existed. we had to call Glock to verify. We had two Glock Employees buy them so far. You’d think Glock employees would get as good if not better than blue box prices on firearms they buy from their employer. |
|
Quoted: After shipping and transfer its within a few dollars of a brand new in stock model at my LGSs, they should lower the price a tad. Even if they are unissued, that doesn’t make them brand new in the box, they should be $500-$550. I’m sure they’d still be making a nice profit at that price. yes, these are direct milled for RMR footprint. Not normally available to general public. |
|
Quoted: Probably cause they are direct milled mos. With the 620 that a regular mos goes for, you still need to buy a decent plate since the glock ones suck. Quoted: Quoted: After shipping and transfer its within a few dollars of a brand new in stock model at my LGSs, they should lower the price a tad. Even if they are unissued, that doesn’t make them brand new in the box, they should be $500-$550. I’m sure they’d still be making a nice profit at that price. Probably cause they are direct milled mos. With the 620 that a regular mos goes for, you still need to buy a decent plate since the glock ones suck. Ok, missed that part, should’ve watched the video. I assumed these were standard MOS guns. |
|
Quoted: My issued 45MOS-5 from last year came with polymer sights. I stuck raised all black Ameriglos on mine. My personal 45 (non-MOS, it was cut for rmr by maple leaf) has Ameriglo Hackathorns on it. https://i.postimg.cc/K8fBS098/IMG_5196.jpg Are those irons usable through the optic? They look damn low. Optical illusion? ETA: Referencing both sets of irons. |
|
The bottom one was my personal gun before I had it milled. I just kept the Ameriglos I had. You can barely see the tips if the optic fails. The top one is my issued weapon. I put tall Ameriglos on them. They are usuable if the optic fails. It sits in the lower third. I did not want taller ones. Some guys put taller ones on and I didn’t like the obstructed view. Eta- Found the box. The ones on my duty gun are Ameriglos GL-429. XL height. |
|
Quoted: OP, I hate you. All day I’ve been thinking about buying another 45 and having it milled. I can’t order this because of the mags and now I’m pissed about it. Fuck this state Can’t AIM sell it to you without the mags? I’ve offered to take the mags out of mine to people inquiring from ban states. |
|
Quoted: OP, I hate you. All day I’ve been thinking about buying another 45 and having it milled. I can’t order this because of the mags and now I’m pissed about it. Fuck this state What state is it? They should be able to remove the mags to sell it to you. Recoilgunworks removed the mags for mine. |
|
Factory RMR cut plus glock performance trigger solves 87% of my problems with Glock. Fuck it, I'm in. @Bryan_Aim since the Colorado government is run by tyrannical pillow biters, will I get some goofy 15 rounder or at least a bit of a discount for missing out on the 3 mags? They can be legally shipped to my FFL by the way. And what happens after that, well it ain't y'alls concern or liability. |
|
Yes the gaps are unsightly. My maple leaf cut fits tight. But I guess Glock did it their way because of variances in rmrs? I know maple leaf redid my glock 31 cut when i changed from an rm02 to rm06. I posted awhile back closeups of the gaps sometime last year when we switched to the 45mos-5 I’m not back to work till Saturday so I can’t do current close up pics of my duty gun. Only at about 4k rounds in the past year. But zero is still holding. We finally got more ammo in so I expect to shoot more this winter. |
|
Quoted: The bottom one was my personal gun before I had it milled. I just kept the Ameriglos I had. You can barely see the tips if the optic fails. The top one is my issued weapon. I put tall Ameriglos on them. They are usuable if the optic fails. It sits in the lower third. I did not want taller ones. Some guys put taller ones on and I didn’t like the obstructed view. Eta- Found the box. The ones on my duty gun are Ameriglos GL-429. XL height. Gotcha, thanks. I went with the GL-411 1XL set (.315 front- tritium/.394 blacked rear), lower 1/3 on my G45. Similar on my G17 MOS but I can't recall the irons #'s. Those sit more ~lower 1/4. |
found my pics from last year on the MOS-5 cut    a little gappy, but I'm past 4k rounds with no issues on my duty gun. our practice ammo is win 9mm nato spec. here's my maple leaf cut on my 45. you can see it's a much tighter fit.  the reason we went to the 45MOS-5 was because we couldn't get any 357sig ammo in and our chief forbade slide milling so we had dovetail plates on our 31s. So the 45MOS-5 was the answer for us. 
|
|
Quoted: Can’t AIM sell it to you without the mags? I’ve offered to take the mags out of mine to people inquiring from ban states. Quoted: What state is it? They should be able to remove the mags to sell it to you. Recoilgunworks removed the mags for mine. Colorado, some companies will do that but there aren’t many. Individual sellers usually will help us out. |
|
When you go to put it in the cart, it tells you that there's an illegal Communist 15 mag restriction... But AIM lets you order the pistol. CO FFLs are allowed to send/receive the mags and they are allowed to sell or distribute mag repair parts. |
|
Quoted: When you go to put it in the cart, it tells you that there's an illegal Communist 15 mag restriction... But AIM lets you order the pistol. CO FFLs are allowed to send/receive the mags and they are allowed to sell or distribute mag repair parts. I’m not gonna be upset if I don’t get the three mags. Of course I’d like to have them but I’m not willing to cause a fight with a vendor over it. |
|
Quoted: I’m not gonna be upset if I don’t get the three mags. Of course I’d like to have them but I’m not willing to cause a fight with a vendor over it. Quoted: Quoted: When you go to put it in the cart, it tells you that there's an illegal Communist 15 mag restriction... But AIM lets you order the pistol. CO FFLs are allowed to send/receive the mags and they are allowed to sell or distribute mag repair parts. I’m not gonna be upset if I don’t get the three mags. Of course I’d like to have them but I’m not willing to cause a fight with a vendor over it. Same. I didn't intend to come across like a pain in the ass entitled customer. Just buying a gun, making conversation, and griping about our shitty gov. |
|
Quoted: found my pics from last year on the MOS-5 cut https://i.postimg.cc/sfQkb0cf/9B7EC3C2-24B6-4829-A455-78E614616286.jpg https://i.postimg.cc/j27BNL5n/4F8CF1E1-8DF5-4562-BA88-D5EDD70E63C9.jpg https://i.postimg.cc/YqQJCGZJ/B9F98AD0-B83D-4BFF-92B1-F1628F2F630E.jpg https://i.postimg.cc/59hhJq7B/71E6653F-6549-48FD-8F16-121ED095959C.jpg a little gappy, but I'm past 4k rounds with no issues on my duty gun. our practice ammo is win 9mm nato spec. here's my maple leaf cut on my 45. you can see it's a much tighter fit. https://i.postimg.cc/pLcrJ4Gz/IMG_5208.jpg the reason we went to the 45MOS-5 was because we couldn't get any 357sig ammo in and our chief forbade slide milling so we had dovetail plates on our 31s. So the 45MOS-5 was the answer for us. https://i.postimg.cc/cJ2nqLj3/2756D463-F7CC-4B09-86C9-065C48B2CBFC.jpg Aesthetically, it's horrendous.  Functionality wise, the recoil bosses are there. I asked our rep if they were going to clean it up some, down the road. |
|
Quoted: After looking at the fitment photos, I have more faith in a standard MOS with a FCD plate than this. I have more faith in solid metal than and extra piece and two more screws. Honestly though I’m not worried about the 45MOS with FCD I just wanted a milled and this happened to pop up the same day. It was a sign from above.  I do wonder if the FCD plate will fit these those since the extra material is removed and the second set of holes are there. Once I pick this up I’ll check it. |
|
Quoted: The MOS plates also have a channel that runs down the middle. Correct. In theory the factory plates are a great concept, especially with the option of like a dozen optic choices. The plates themselves are lacking as are the variances in slide cuts. I'm sure it's difficult to mass produce and accommodate the slew of manufacturers' optics w/o people having difficulties with fitment. There's got to be some room for play there in order to keep things "generic". |