Posted: 4/2/2026 8:32:25 PM EDT
|
Less fancy stuff than the MAC so will probably be a bit cheaper (hopefully). Attached File |
|
Looks like the top of the slide is also getting serations. I read on Facebook that these should be available late April, first of May. Attached File |
We the slaves of the socialist republic of America pledge allegiance to the government for which it stands one nation under Marshall law with safety and healthcare for all.
|
Originally Posted By imq707s: I thought Tisas has had those out for several months now? Nope. There were the MAC/SDS DS series which Tisas made on contract that had some extra flare (and cost). Tisas has made a full rail Night Stalker for a couple years but SDS chose not to import the full rail model for some crazy reason. These are what would be the Gen 3 2011 from Tisas now. |
Member
Joined:
Jun 2022
Posts:
13116
EE: 100% (30)
TX, USA
I will pass on another Tisas/MAC…until PSA puts them on sale and then I will sprain my wrist reaching for my credit card.
|
“That’s not how it works. You buy more tools and power than you need and as you fuck everything up you gain the knowledge to become a better carpenter.”
Tveddy
Tveddy
|
Originally Posted By -OdieGreen-: Nope. There were the MAC/SDS DS series which Tisas made on contract that had some extra flare (and cost). Tisas has made a full rail Night Stalker for a couple years but SDS chose not to import the full rail model for some crazy reason. These are what would be the Gen 3 2011 from Tisas now. Originally Posted By -OdieGreen-: Originally Posted By imq707s: I thought Tisas has had those out for several months now? Nope. There were the MAC/SDS DS series which Tisas made on contract that had some extra flare (and cost). Tisas has made a full rail Night Stalker for a couple years but SDS chose not to import the full rail model for some crazy reason. These are what would be the Gen 3 2011 from Tisas now. Thanks for the clarification. 
|
Joined:
Apr 2023
Posts:
887
EE: 0% (0)
USA
|
Originally Posted By 78FORDF150: Looks like the top of the slide is also getting serations. I read on Facebook that these should be available late April, first of May. https://www.ar15.com/media/mediaFiles/66344/Screenshot_20260406_113051_Drive_jpg-3742195.JPG Sweet, was wondering when the ETA was, Thanks! Was going to pick up a MAC/DS to toy with but i saw this. |
| I just about order a Mac last week. I'm glad I held off as I really like the grip on the Tisas over the Macs. |
We the slaves of the socialist republic of America pledge allegiance to the government for which it stands one nation under Marshall law with safety and healthcare for all.
Joined:
Apr 2023
Posts:
914
EE: 0% (0)
USA
Found a video showing the new full rail comp, although it's in surrender language.  Tisas Carry 9 DS 4.25 COMP Doesn't seem to be using an AOS mounting plate, although this could be a euro version slide cut. https://youtu.be/E8x_bXnx1SU?t=419 Still lurking for more news about a concrete release date. |
Joined:
Apr 2023
Posts:
927
EE: 0% (0)
USA
 NRA Show 2026 | Day 2 | KAYA RETURNS!!! | New Handguns From Tisas, Walther, & More Video showing new Tisas lineup. -From NRA 2026 show a few days ago. *edited post with a better video* |
TFBTV interview with Kaya regarding Tisas. How Kaya Became the CEO of Tisas Arms https://youtu.be/SonRC8B7cEg?si=W2g-vY3PwJ-Nb87U |
Joined:
Apr 2023
Posts:
1007
EE: 0% (0)
USA
|
Originally Posted By SAARINEN: No new news movement on these. Really lacking on advertising for themselves. Website is pretty meh too, almost like this wasn't thought out as well as it could have been.  SDS isn't carrying Tisas parts now so we're in limbo with that too....
|
|
Originally Posted By dogtired: I think a single slot on the rail is silly. Surefire, Streamlight, and Holosun build their rail to trigger guard spacing entirely around Glock and come with Glock keys installed out of the box. I think it was a good decision to choose that layout. |
Joined:
Apr 2023
Posts:
1025
EE: 0% (0)
USA
|
Originally Posted By -OdieGreen-: Surefire, Streamlight, and Holosun build their rail to trigger guard spacing entirely around Glock and come with Glock keys installed out of the box. I think it was a good decision to choose that layout. I get that but adding other slots doesn’t change that. |
|
Originally Posted By SAARINEN: Maybe stepping closer to release. This popped up on Bud's Gunshop 5 days ago. (Not in stock yet) https://i.imgur.com/wBFtU3h.png |
We the slaves of the socialist republic of America pledge allegiance to the government for which it stands one nation under Marshall law with safety and healthcare for all.
|
Originally Posted By SAARINEN: Maybe stepping closer to release. This popped up on Bud's Gunshop 5 days ago. (Not in stock yet) https://i.imgur.com/wBFtU3h.png I was tempted to get my first 2011 with the deal PSA has this weekend for an ODG version, but curious how much that new comp version will be. |
I carry a gun because a cop is too heavy.
Joined:
Apr 2023
Posts:
1054
EE: 0% (0)
USA
|
@Dolor @78FORDF150 They're in stock, go go go. 5inch: https://gun.deals/search/apachesolr_search/711500175227 4.25inch: https://gun.deals/search/apachesolr_search/711500175210 |
|
Originally Posted By SAARINEN: @Dolor @78FORDF150 They're in stock at KYGUNCO, Go go go https://www.kygunco.com/product/310942 https://www.kygunco.com/product/tisas-carry-9-ds-comp-9mm-4.25-17rd Ooof. Hopefully they come down a bit. My older model with the bull barrel was only $588. |
|
Originally Posted By Dolor: Ooof. Hopefully they come down a bit. My older model with the bull barrel was only $588. BattleHawk has them for $825 but who knows if you’ll actually get it or not from them. Honestly that’s pretty steep. The MAC had some extras. Not good extras, but at least some extra effort. This is just their existing model with a full rail. I’d rather buy an Alpha Foxtrot for $200-$300 more. Or pay $200-$300 less for one where the only difference is the rail length. That’s wild they want that much more for literally an extra inch of dust cover. |
|
Originally Posted By -OdieGreen-: BattleHawk has them for $825 but who knows if you’ll actually get it or not from them. Honestly that’s pretty steep. The MAC had some extras. Not good extras, but at least some extra effort. This is just their existing model with a full rail. I’d rather buy an Alpha Foxtrot for $200-$300 more. Or pay $200-$300 less for one where the only difference is the rail length. That’s wild they want that much more for literally an extra inch of dust cover. Based on some videos they're redoing a bunch of things. Increasing qc, new US company for importing... etc. it wouldn't surprise me if we see prices start to drop once the dust settles but I agree at this time...I can wait lol |
|
Originally Posted By Dolor: Ooof. Hopefully they come down a bit. My older model with the bull barrel was only $588. Yeah, never thought I would see the day of $900 Turkish 1911s. Not saying they're not good pistols. |
"According to Argonne National Laboratory, it takes 100 pounds of battery in an EV to go a distance achieved by only one pound of gasoline in an ICE vehicle"
Joined:
Apr 2023
Posts:
1074
EE: 0% (0)
USA
|
Originally Posted By SAARINEN: Maybe stepping closer to release. This popped up on Bud's Gunshop 5 days ago. (Not in stock yet) https://i.imgur.com/wBFtU3h.png I just noticed that seems like either a really bad color matching or like an OD green frame. Curious if they might be looking to offer different color options. |
|
Originally Posted By Dolor: I just noticed that seems like either a really bad color matching or like an OD green frame. Curious if they might be looking to offer different color options. This is the color code they’re using. Attached File |
Joined:
Apr 2023
Posts:
1084
EE: 0% (0)
USA
|
Originally Posted By Dolor: I just noticed that seems like either a really bad color matching or like an OD green frame. Curious if they might be looking to offer different color options. That one is a Buds Gunshop exclusive. Hope they do a coyote.. |
Joined:
Apr 2023
Posts:
1088
EE: 0% (0)
USA
Got my 5" DS comp in today.  2 x 18rd MecGar magazines, RMR Optic plate with screws, 3 trigger shoe sizes, 2x mag release sizes buttons. Grip texture is adequate to my tastes, I'm glad i avoided getting the MAC DS Comp- since all I've read is that it was slippery.       Fit and finish is pretty nice, awesome machining. Only disappointment i have is that they didn't use an AOS optic plate. This seems proprietary, and it seems like it will be a few months before any aftermarket or OEM plates. How to remove Iron sight plate -- (((This is only for the default plate, the RMR plate requires 2 screws like most plates.)))  |
|
Originally Posted By SAARINEN: Got my 5" DS comp in today. https://i.imgur.com/HwG4ctc.jpeg 2 x 18rd MecGar magazines, RMR Optic plate with screws, 3 trigger shoe sizes, 2x mag release sizes buttons. https://i.imgur.com/5PQv4Kp.jpeg https://i.imgur.com/NW6QIQG.jpeg https://i.imgur.com/VM3L9QX.jpeg https://i.imgur.com/8ZoJHEy.jpeg https://i.imgur.com/JeMSvZA.jpeg https://i.imgur.com/W963Cmm.jpeg Fit and finish is pretty nice, awesome machining. Only disappointment i have is that they didn't use an AOS optic plate. This seems proprietary, and it seems like it will be a few months before any aftermarket or OEM plates. How to remove Iron sight plate -- https://i.imgur.com/qYSBVug.png Looks great. I will be honest though, my personal pref is not to have the rear sight as part of the optics plate. Just my personal pref...so I'll be sticking with my current set up. Thanks for the pics. Hope she shoots as good as she looks. |
|
I really like the looks of the slide serations and finally one that doesn't have a fiber optic front sight |
We the slaves of the socialist republic of America pledge allegiance to the government for which it stands one nation under Marshall law with safety and healthcare for all.
Joined:
Apr 2023
Posts:
1106
EE: 0% (0)
USA
|
Originally Posted By SAARINEN: Some optic mounted pictures: https://i.imgur.com/13PvPl7.jpeg https://i.imgur.com/UT5UfX5.png https://i.imgur.com/9m5sM97.jpeg That's sick. Love the side on it. |
|
Originally Posted By SAARINEN: Got my 5" DS comp in today. https://i.imgur.com/HwG4ctc.jpeg 2 x 18rd MecGar magazines, RMR Optic plate with screws, 3 trigger shoe sizes, 2x mag release sizes buttons. Grip texture is adequate to my tastes, I'm glad i avoided getting the MAC DS Comp- since all I've read is that it was slippery. https://i.imgur.com/5PQv4Kp.jpeg https://i.imgur.com/NW6QIQG.jpeg https://i.imgur.com/VM3L9QX.jpeg https://i.imgur.com/8ZoJHEy.jpeg https://i.imgur.com/JeMSvZA.jpeg https://i.imgur.com/W963Cmm.jpeg Fit and finish is pretty nice, awesome machining. Only disappointment i have is that they didn't use an AOS optic plate. This seems proprietary, and it seems like it will be a few months before any aftermarket or OEM plates. How to remove Iron sight plate -- (((This is only for the default plate, the RMR plate requires 2 screws like most plates.))) https://i.imgur.com/qYSBVug.png Looks good! Thanks for the quick review Had a chance to shoot it yet? Originally Posted By -OdieGreen-: BattleHawk now shows them as being $730. (Have to add to cart.) That’s more like it. Thanks for the headsup thread, been waiting to get one without the slide cuts Of course I snagged one before you posted the prices dropped the other day
|
Joined:
Apr 2023
Posts:
1109
EE: 0% (0)
USA
|
Originally Posted By stiglitz_actual: Looks good! Thanks for the quick review Had a chance to shoot it yet? Thanks for the headsup thread, been waiting to get one without the slide cuts Of course I snagged one before you posted the prices dropped the other day @stiglitz_actual Not yet, this is my first Tisas - and from what I've heard the optic screws they ship with leave alot to be desired (heard of shearing and stripping risks) - so waiting for some screws from Ebay before i fully mount. Can't wait to give it a go. |
|
Picked mine up - Threw on some grip tape, RM01, and Henning +3 mag extensions Loaded up everything from pissin' hawt 115gr to subsonic 147gr to try out this weekend Will run a few hundred through it and see how it breaks in and whether the factory optic plate screws hold up  
|
|
Originally Posted By stiglitz_actual: Picked mine up - Threw on some grip tape... @stiglitz_actual Where did you get the grip tape? I like that it doesn't cover the front and back checkering. Thanks, Mark Attached File |
Be the Person your Dog thinks You Are!
|
Originally Posted By DMark: @stiglitz_actual Where did you get the grip tape? I like that it doesn't cover the front and back checkering. Thanks, Mark https://www.ar15.com/media/mediaFiles/11759/grip_tape_jpg-3796841.JPG @DMark It's a set of HandleIt grips for the MAC9 that I cut up with scissors https://www.handleitgrips.com/product-page/military-armament-corp-mac-9-ds-gun-grip-enhancement-gun-parts-kit Not worth it IMO, just get a roll of skateboard tape and cut some rectangles for the grips and a bit under the trigger guard |
|
Originally Posted By stiglitz_actual: Not worth it IMO, just get a roll of skateboard tape and cut some rectangles for the grips and a bit under the trigger guard Agree, that is what I'll do. Already have a couple of sheets of both the textured rubber and sandpaper left over from other projects. Thanks! |
Be the Person your Dog thinks You Are!