Posted: 11/26/2005 8:44:25 PM EDT
[Last Edit: ManiacRat][Edited]
|
This is very short, but some of the more common link that I found a while back. If you know of more add away. There is not much information on these pistols so a centralized spot to find links would be great! www.star-firearms.com Good site with information and some parts links, not sure how accurate and up to date the links are, will check into it further and advise. Not to be confused with a corporate website, Star is bankrupt and no longer around, they shut their doors along with Astra in May 1997. ***Went back and looked this site over. They have added more info for parts, holsters, magazines et cetera. Direct link to their information. www.star-firearms.com/info/parts.shtml 9mmlargo.com/ Information on the really old Star's from the 1920s. www.iparguns.com/ING/INDEX.HTM Seems to be a reliable parts source for the newer model Stars, such as the Firestar series. There was a member here on the board who has ordered, and said the quality was good. They are in Spain, so shipping is probably pricey, but it seems to be a good parts source. ***The link is dead as a door nail. The first link above has their phone number, I'm gonna try to remember and give them a call to see if they are even still around, if my dumb ass can figure out how to make an internation call..... www.gun-parts.com/star/ Older Star parts, never ordered from them since all I have is a Firestar model. world.guns.ru/handguns/hg113-e.htm Information on the Firestar series. www.cdnninvestments.com/index.html OhioEd advises this is a source for factory mags. www.gunsprings.com/SemiAuto/StarNF.html Ceeter found this source for replacement springs. www.wisnersinc.com/pistols/S_Wpistol.html This place has a few parts(literally) for F model and Pony model Star's. Little bit of information to add: To check the model series if you do not know, check on the beveled inside edge of the magwell and you will see a letter, that is the model Star you have. Of course the Firestar's are stamped on the slide "Firestar" they are pretty self explanatory. Personally, I have not had good luck with the aftermarket magazines. You can find factory magazines at gun shows and on ebay(at one time have not checked in a while) they're fairly reasonable considering the company is no longer around. Little bit of informative info from desterfox: The recoil guide on this Star has a couple of hick-ups, but this is something that can be solved very quickly. As the B has a habit of cracking the slide after hard and abusive work, just like some 1911's, the SA Army modified the recoil guide by fitting a shock dampener. This has the result that if the sidearm does not have enough oil, bad ammo or a thumb rides the slide the habitual "smoke stack" will occur. This is not a problem and the "stack" can be cleared in split seconds, if you have been trained in it. Due to the mags that is made for .38super some feeding problems may occur. This is retified by loading your mags correctly, have the longest TOL that you can load or just spacing the mags. Hope this helps, if you know of more please add it. With all of the recent posts on Star's it would be great to have a tacked thread with as much information as possible. Also, thank you Striker for tacking this in the forum. I don't get on here enough to check im's so just post what ya find. I don't see the thread getting too lengthy anyway..... |
If at first you don't succeed, failure might just be your thing.
Rest in Peace Dad. 27Jan1954-12Nov2005
Rest in Peace Dad. 27Jan1954-12Nov2005
|
I found replacement springs here - www.gunsprings.com/SemiAuto/StarNF.html |
ditto and tagging this thread for future reference |
I often wonder whether we do not rest our hopes too much upon constitutions, upon laws and upon courts. These are false hopes. Liberty lies in the hearts of men and women; when it dies there, no constitution, no law, no court can save it. ~ Learned Hand
|
I need to dig around and see if I can find anything new on them. I think the ipar link is dead, don't know if they shut down or just lost the website. Well added some stuff. One thing I thought of is maybe starting a picture i.d. series type thing within this thread. Some Star's are ancient and saw hard use and folks might not be able to tell. All I can add is an M40 from my personal collection. What do ya'll think? |
Hey Southeast Texans? Join South East Texas Sportman's Club! Ask me how.
"Saying you're bi-polar is just an excuse to act like a dumbfuck!" Me
AR15.com, Where everything is peachy until you don't agree with the "hive mind"
"Saying you're bi-polar is just an excuse to act like a dumbfuck!" Me
AR15.com, Where everything is peachy until you don't agree with the "hive mind"
|
You'll be happy with a M40. I love mine, it's very accurate for a short barrel pistol. I took a gamble of spending $175 on it about 8 years ago and got one right. he PS ya ain't gonna talk me out of mine |
| I have a Star Super B and it is missing a rear sight, "NOT BY ME" was that way when I got it. Anyway I can't seem to find anybody with a rear sight. Does anybody have a source for one? I would really lke to get this baby working again. Is it the same as the early 1911 sight? If not can one be fitted to work? Thanks for any help you guys might have. Jim |
|
Glowfinger, try the gun-parts.com link. I think I saw quite a large list for B models. My M40 seems like to ammo that is known to be loaded hot. It will jam if I use cheap ammo and yesterday I shot nothing but PMC, TAP and Winchester SXT and it functioned without skipping a beat. I've always been told PMC is loaded pretty hot(someone feel free to correct me if I'm wrong) so if you got a jamming problem it's worth a shot. For some reason a lot of factory 6rnd starvel mags are back on the market. Seen them a lot lately for $25-$40 apiece. |
Hey Southeast Texans? Join South East Texas Sportman's Club! Ask me how.
"Saying you're bi-polar is just an excuse to act like a dumbfuck!" Me
AR15.com, Where everything is peachy until you don't agree with the "hive mind"
"Saying you're bi-polar is just an excuse to act like a dumbfuck!" Me
AR15.com, Where everything is peachy until you don't agree with the "hive mind"
I've been happy with mine for the 5 years or more I've owned it. I'd love to find a starvel 9mm and .45 to match the .40. No such luck yet |
Hey Southeast Texans? Join South East Texas Sportman's Club! Ask me how.
"Saying you're bi-polar is just an excuse to act like a dumbfuck!" Me
AR15.com, Where everything is peachy until you don't agree with the "hive mind"
"Saying you're bi-polar is just an excuse to act like a dumbfuck!" Me
AR15.com, Where everything is peachy until you don't agree with the "hive mind"
Just picked one of these little guys up for $299. Nice little shooter. |
Yo Homie, they put the sights on top for a reason-
Frank Castle
Frank Castle
Is that a .380? Looks like a FI Model D, which was originally to be the Colt Pony. early model Serial no.s started with CPA (Colt Pony Automatic). more info (scroll down): http://www.star-firearms.com/firearms/guns/d/index.shtml Want to sell yours? |
Tell me about it...Star Megastar 45 was my first pistol. I now have a 30m in 9mm and a M43 in 9 as well. I'd also like to pick up a Megastar in 10mm... |
Yo Homie, they put the sights on top for a reason-
Frank Castle
Frank Castle
|
Iparguns link is http://www.iparguns.com/cas/index.htm
I just emailed them for some Megastar Mags and they have them for $45 a pop. Much better than the $175 I have seen them for. Their email is [email protected] Nice people. |
| Can anyone tell me about parts interchangability for Star pistols? I was given a Star Firestar M43 in 9mm recently, but it was completely disassembled and after some research it is missing the manual safety plunger. For a part that is so simple my hope is that a Star Model D or Starfire safety plunger would fit into the Firestar, since both are available at gun-parts.com. |
|
A heads up for all you Star PD owners out there. Recoil buffers are once again available and very inexpensive.
1 buffer $5.00 + $4.95 shipping and handling for a total of $9.95...........$5.00 each + S&H 3 buffers $13.50 +$ 4.95 shipping and handling for a total of $18.95.........$4.50 each + S&H 10 buffers $40.00 + $ 4.95 shipping and handling for a total of $44.95.........$4.00 each + S&H The contact for them is [email protected] Good luck and shoot straight......... Jimbo |
|
Good afternoon:
I've looked at several websites that handle Star handgun parts and have not been able to find a magazine for my Star Ultrastar .40 S&W handgun. The weapon, when I purchased it a couple of years ago, came with only one magazine. Can anyone give me an idea of where I might be able to find a couple more magazines for this weapon? Regards, Charleymil |
|
Originally Posted By charleymil:
Good afternoon: I've looked at several websites that handle Star handgun parts and have not been able to find a magazine for my Star Ultrastar .40 S&W handgun. The weapon, when I purchased it a couple of years ago, came with only one magazine. Can anyone give me an idea of where I might be able to find a couple more magazines for this weapon? Regards, Charleymil I have seen some on www.gunbroker.com |
|
Originally Posted By Hb2:
Originally Posted By charleymil:
Good afternoon: I've looked at several websites that handle Star handgun parts and have not been able to find a magazine for my Star Ultrastar .40 S&W handgun. The weapon, when I purchased it a couple of years ago, came with only one magazine. Can anyone give me an idea of where I might be able to find a couple more magazines for this weapon? Regards, Charleymil I have seen some on www.gunbroker.com I think there's one or two .40 ultrastar pistols for sale. You might as well buy another pistol as mags are so damn expensive. This way you have an extra mag and spere parts if something breaks... |
Yo Homie, they put the sights on top for a reason-
Frank Castle
Frank Castle
|
Originally Posted By zaskar017: there is a member named STAR on gunboards he is located in spain and has access to lots of parts and mags http://forums.gunboards.com/showthread.php?40589-WTS-STAR-Parts-Grips-Magazines........ it was the only reason i registered on that board |
|
FWIW after searching for a decade, I just got 3 brand new factory megastar .45 magazines out of italy. They arrived here in dallas in 3 days flat 42 bucks a piece wasn't bad I think. Last one I saw in the flesh, the guy wanted 130. |
| Does anyone know of a current source for Firestar M43 9mm parts? My friend's wife has one as her defense gun and loves it (won't switch to a more modern/available gun), and when we took it to the range recently it was having issues that point to either extractor or extractor spring. I haven't had a chance to take it apart yet, but if I can find the parts I'm just going to grab them on principle. |
|
Originally Posted By zombiegristle:
Does anyone know of a current source for Firestar M43 9mm parts? My friend's wife has one as her defense gun and loves it (won't switch to a more modern/available gun), and when we took it to the range recently it was having issues that point to either extractor or extractor spring. I haven't had a chance to take it apart yet, but if I can find the parts I'm just going to grab them on principle. Gunbroker possibly? |
Yo Homie, they put the sights on top for a reason-
Frank Castle
My small dick can still reach the lock button.
-NorCal LEO
Frank Castle
My small dick can still reach the lock button.
-NorCal LEO
|
GTGammo.com has new manufacture 9mmLargo (9x23) available
GTGAMMO 9mm Largo 9x23 |






