|
Originally Posted By 3one5: Nice! How does it shoot? It is happier with one load over another? I have only put 200ish rounds through it so far. Wouldn't cycle 115gr Blazer brass at first. Put 150ish rounds of 124gr handloads through it, and then went back to the 115gr Blazer, and it ran fine. I want to run some more cheap stuff through it. I figure if it runs 115gr stuff, it will run just about anything. 1 mag of old 124gr bonded golden Sabre ran without issues as well. The gun definitely tracks better with the comp then without. And I like the size of the Legion. |
| Question for the guys with PMM comps: is the rocksett 100% necessary? Seems like it would make it a pain in the dick to clean the gun if you can't easily take the comp off. Or am I just overthinking things? (I'm thinking about getting a barrel and comp for my 19x with the Biden bucks to get my fauxland going) |
|
Originally Posted By NorthPolar: Question for the guys with PMM comps: is the rocksett 100% necessary? Seems like it would make it a pain in the dick to clean the gun if you can't easily take the comp off. Or am I just overthinking things? (I'm thinking about getting a barrel and comp for my 19x with the Biden bucks to get my fauxland going) Honestly, there's no reason to completely remove the barrel for cleaning. Just remove the RSA and tilt the barrel out. |
Please, call me Joe
Follow me on Instagram!
http://instagram.com/tcba_joe/
Follow me on Instagram!
http://instagram.com/tcba_joe/
|
Originally Posted By NorthPolar: Question for the guys with PMM comps: is the rocksett 100% necessary? Seems like it would make it a pain in the dick to clean the gun if you can't easily take the comp off. Or am I just overthinking things? (I'm thinking about getting a barrel and comp for my 19x with the Biden bucks to get my fauxland going) Yes, use the rocksett. I agree with Joe that it isn't necessary to remove the barrel completely to clean it. You can run a boresnake through it without disassembling, and you can slide the barrel forward to wipe down the rest of it. |
You gotta risk it to get the biscuit
Joined:
Feb 2011
Posts:
8604
EE: 100% (519)
MO, USA
|
Originally Posted By Airborne_Infantryman: https://www.ar15.com/media/mediaFiles/241023/20210318_212720_jpg-1873938.JPG What comp is that @Airborne_Infantryman ? Looks pretty nice |
Just because you're not paranoid, doesn't mean they're not out to get you
|
Originally Posted By floater33: What comp is that @Airborne_Infantryman ? Looks pretty nice @floater33 It's the MAC Defense single port comp. Makes a 19 the exact length as a 17.  I believe the 3 port makes a 19 slightly shorter than a G34. https://macdefenseindustries.com/store/G19-MAC-Comp-and-Barrel-p253343642 |
|
Originally Posted By Airborne_Infantryman: @floater33 It's the MAC Defense single port comp. Makes a 19 the exact length as a 17. https://macdefenseindustries.com/store/G19-MAC-Comp-and-Barrel-p253343642 How you liking it? Any hiccups? |
|
Originally Posted By spadedracer: How you liking it? Any hiccups? None at all. However mine is only a single port. I love how simple installation is. It's foolproof and it stays put. Tolerances are tight, so attaching the comp to the proprietary barrel, you gotta have it lined up *just* right. Something to know with these comps - they are steel and not aluminum like most, so the 3-port might require a different recoil assembly due to the weight and the 2 extra ports. |
|
Originally Posted By Airborne_Infantryman: None at all. However mine is only a single port. I love how simple installation is. It's foolproof and it stays put. Tolerances are tight, so attaching the comp to the proprietary barrel, you gotta have it lined up *just* right. Something to know with these comps - they are steel and not aluminum like most, so the 3-port might require a different recoil assembly due to the weight and the 2 extra ports. Thanks for the input. I've been on the fence. I do prefer the compactness of the MAC vs PMM/Others. |
|
Originally Posted By Moses_J: Miller finally went Full Send with a comp. https://www.ar15.com/media/mediaFiles/222364/Glock-General-Miller_jpg-1876894.JPG 17 or 19? |
|
A couple of Folands in there. Attached File |
Creator of the most viewed EE thread in ARFCOM history.
https://www.ar15.com/forums/General/-ARCHIVED-THREAD-Weird-EE-Read-post-count/5-2100843/?page=1
https://www.ar15.com/forums/General/-ARCHIVED-THREAD-Weird-EE-Read-post-count/5-2100843/?page=1
|
Originally Posted By Moses_J: Miller finally went Full Send with a comp. https://www.ar15.com/media/mediaFiles/222364/Glock-General-Miller_jpg-1876894.JPG Anyone know what holster that is? |
|
Originally Posted By 3one5: Anyone know what holster that is? https://www.comp-tac.com/qb-belt-holster |
|
Thanks! |
|
Originally Posted By LsuJon: Got the last piece of the puzzle today... the unobtanium freya :) now I just need to find someone to stipple it. https://i.imgur.com/jgkrG9I.jpg Hell yeah man, Congrats!!! I knew you would find one hopefully you didn’t have to sell a kidney for it 
|
|
Originally Posted By -KentuckyWindage-: Hell yeah man, Congrats!!! I knew you would find one hopefully you didn't have to sell a kidney for it |
IG @bayou_bengal-rifles
|
Originally Posted By LsuJon: Got the last piece of the puzzle today... the unobtanium freya :) now I just need to find someone to stipple it. https://i.imgur.com/jgkrG9I.jpg What height sights are those? |
|
Just got my frame back from LFI. Couldn't be happier and can finally say the Roland is done. Attached File |
IG @bayou_bengal-rifles
|
Originally Posted By LsuJon: Just got my frame back from LFI. Couldn't be happier and can finally say the Roland is done. https://www.ar15.com/media/mediaFiles/316069/003D76C4-9963-46AF-8AF2-01350AD9DB59_jpe-1912448.JPG Nice! Glad to see more Rolands in here. |
|
Originally Posted By LsuJon: Just got my frame back from LFI. Couldn't be happier and can finally say the Roland is done. https://www.ar15.com/media/mediaFiles/316069/003D76C4-9963-46AF-8AF2-01350AD9DB59_jpe-1912448.JPG @lsujon who did that stippling? A quick google search didn’t turn up an LFI. It looks super clean and I have a G34 that needs stippled |
|
Originally Posted By oldbrowndog: @lsujon who did that stippling? A quick google search didn't turn up an LFI. It looks super clean and I have a G34 that needs stippled Attached File |
IG @bayou_bengal-rifles
| New user here. I skimmed the thread, so forgive me if this has been asked and answered, but does anyone know if the KKM Glock 19 Match Gen 5 Barrel with 4-Port Compensator is compatible with the ZEV Z19 Gen 5 Duty stripped slide? I called KKM and they weren't sure, and I couldn't get ahold of anyone at ZEV. The bullnose looks the same on the ZEV and OEM slides, but I can't be certain. I'd really like to have a Roland of my own, and the ZEV slide was the only one I could find online at the moment. If the KKM barrel/comp doesn't work maybe the PMM one will. |
|
Originally Posted By NorthCountryExile: New user here. I skimmed the thread, so forgive me if this has been asked and answered, but does anyone know if the KKM Glock 19 Match Gen 5 Barrel with 4-Port Compensator is compatible with the ZEV Z19 Gen 5 Duty stripped slide? I called KKM and they weren't sure, and I couldn't get ahold of anyone at ZEV. The bullnose looks the same on the ZEV and OEM slides, but I can't be certain. I'd really like to have a Roland of my own, and the ZEV slide was the only one I could find online at the moment. If the KKM barrel/comp doesn't work maybe the PMM one will. Should not be a problem. However I would go with the Zev G5 barrel and G5 comp. They were made to work together. |
|
Originally Posted By WTFShane: I just found out last night that RCS is making the Freya magwell for 17 Gen 4. I know Mr. Pressburg mentioned having a 17 with RMR, so is it still considered a Roland Special? Too lazy to dig through this thread. Sorry, but not sorry. There are so many variations of what is considered a Roland Special these days. I say make what you want. |
|
Originally Posted By WTFShane: I just found out last night that RCS is making the Freya magwell for 17 Gen 4. I know Mr. Pressburg mentioned having a 17 with RMR, so is it still considered a Roland Special? Too lazy to dig through this thread. Sorry, but not sorry. There seems to be an "official" Roland, but the whole category of carry comp. Which includes various unit guns if you want to cove something specifically, to really any modern defensive handgun with a light, comp, and slide mounted red dot. If you want to "clone" so be it. But in reality you're probably better off just building the comped gun YOU want |
Please, call me Joe
Follow me on Instagram!
http://instagram.com/tcba_joe/
Follow me on Instagram!
http://instagram.com/tcba_joe/
|
Originally Posted By LsuJon: Thanks man! Feeling pretty lucky! Over all pretty content w/ how much I paid! All thanks to @outlaw621 Originally Posted By LsuJon: Originally Posted By -KentuckyWindage-: Hell yeah man, Congrats!!! I knew you would find one hopefully you didn't have to sell a kidney for it What is the going rate for a freya these days? |
|
It identifies as a glock Attached File Didn't see a thread over on the sig side as fitting |
|
Anyone like setting up a 26 or 43X like this? Humble Marksman did a video where he shot a USPSA match with a 43X Rolandito and did fine. He's an M class competitor and only shot a little off his regular score.  Can a Glock 43X compete with a 2011? Using a concealed carry gun at USPSA in OPEN MINOR |
Deserve's got nothing to do with it.
|
Originally Posted By feudist: Anyone like setting up a 26 or 43X like this? Humble Marksman did a video where he shot a USPSA match with a 43X Rolandito and did fine. He's an M class competitor and only shot a little off his regular score.  https://www.youtube.com/watch?v=o-uXUUZjsVYMy 43x is set up like a mini-Roland. Attached File Arc Division Sparc comp Griffin threaded barrel Empire PBF Katana mag well Shield mags and mag catch Overwatch PolyDAT trigger I plan on getting a light for it but haven't decided which one yet. I also want the Parker Mountain Machine compensator/barrel but they haven't released it yet. |
|
Originally Posted By Sonoran_Tj: My 43x is set up like a mini-Roland. https://www.ar15.com/media/mediaFiles/276110/20210616_095919_jpg-1979856.JPG Arc Division Sparc comp Griffin threaded barrel Empire PBF Katana mag well Shield mags and mag catch Overwatch PolyDAT trigger I plan on getting a light for it but haven't decided which one yet. I also want the Parker Mountain Machine compensator/barrel but they haven't released it yet. *grumbles* guess I’m going to be buying another 43X That thing is awesome. |
|
Originally Posted By FunFirepower: I'm not Paris Hilton, but That's Hot. How's it shoot compared to an RMR'ed 19? Different but not any worse. The compensator keeps the rotational recoil low but the push to the rear is still pretty sharp, exaggerated slightly by the slimmer frame. I've shot about a hundred rounds of 124gr +P HSTs through it and its very manageable with those. Interesting thing about the RMRcc, the window really isn't much smaller. The vertical measurement of the glass is much smaller on the RMRcc than it is on the full size but it doesn't really matter. On the regular RMR the glass extends lower but from the shooter's perspective that area is behind the body where the emitter is. If you tilt the gun up enough to look through that portion of the window the dot wouldn't be in your field of view anyway. In short, the RMRcc is essentially the same as a regular RMR on in vertical window measurement; it is still a tenth of an inch narrower. |
|
Originally Posted By ARK_Ginger: It identifies as a glock https://www.ar15.com/media/mediaFiles/469500/IMG_1334_jpg-1979266.JPG Didn't see a thread over on the sig side as fitting I'll allow it
|
|
No ATEI enhanced serrations, so both faux-land specials.
|
|
Originally Posted By 3one5: How is everyone keeping their brakes clean? Mine tends to accumulate a ton of caked on crap that doesn't want to come off with a dental pick so I've just been leaving it :) Ultrasonic cleaner (extreme simple green/water). The extreme simple green is safe for aircraft aluminum, carbons etc) |
