Posted: 1/13/2024 4:00:14 PM EDT
|
I've had my Micro Dagger going on one month now. Bought it complete off the PSA website. Gotta be quick! I absolutely love everything about this handgun. The grip fits my hand better than any other handgun I've held and I think I've held them all. To me, the trigger is vastly better than the 43X, Shield, P365, or Hellcat. To me a carry handgun should never have a light trigger short pull for safety reasons. I'm not target shooting with this. Lastly, the size and capacity is amazing. It's so much smaller and lighter than my HK P2000 LEM and holds 2 more rounds. That said, I need a holster! An IWB appendix holster made of kydex with a belt clip. Unfortunately kydex 43X holsters do not fit from my experience because the trigger guards on the two handguns are different and that's generally the retention point? Micro Dagger rounded vs 43X squared off. I bought the Micro Dagger as my ultimate carry gun, but I can't carry it without a holster! Kinda sucks. 
|
|
Aimsurplus released a vid recently trying various holsters for Glock clones. They had great luck as long as they used holsters made for weapon lights, as they tend to index on the light instead of the trigger guard. I'd post a link to the video but can no longer find it. Maybe it was removed? Anyway, their conclusions were based off the compact models. Curious to see if the same holds true for the sub compacts as well. Found the vid:  Failed To Load Title |
| Check out Bordertown holsters . They are fast and the customer service is great! |
A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed.
|
Originally Posted By SouthernGunHand: Check out Bordertown holsters . They are fast and the customer service is great! Thank you for replies everyone! I'm really only considering holsters specifically made for the Micro Dagger as I don't want to gamble or have it fit only 87%... even 95%. I also don't plan on putting a light on it unless someone makes something extremely compact. A red dot, yes! That said, this Bordertown company makes one specifically for the Micro Dagger. Awesome, thanks @SouthernGunHand If you have one, please share pics! I'm probably ordering one today. Just undecided on options and colors. |
|
Originally Posted By Supra: Thank you for replies everyone! I'm really only considering holsters specifically made for the Micro Dagger as I don't want to gamble or have it fit only 87%... even 95%. I also don't plan on putting a light on it unless someone makes something extremely compact. A red dot, yes! That said, this Bordertown company makes one specifically for the Micro Dagger. Awesome, thanks @SouthernGunHand If you have one, please share pics! I'm probably ordering one today. Just undecided on options and colors. |
A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed.
|
Originally Posted By SouthernGunHand: @Supra Quality is nice, fit is perfect, highly recommended! https://www.ar15.com/media/mediaFiles/159722/BT1-3097034.jpg https://www.ar15.com/media/mediaFiles/159722/BT2-3097035.jpg You didn't show a picture of the wacky Mexican candy he sends  I have several of his IWB holsters, two mag pouches and one of his wallets. I have been pleased with them. My original dagger holster had a small crack that showed directly where the mounting hardware mounts. That was after 2 years of daily use. Unfortunately, I didn't see it until after I had already sold it (since I had a light version I was using). I notified the seller that I was going to either refund him or see what I could do with the manufacturer. BH shipped me a replacement shell that day. I swapped the hardware over and sent the buyer an essentially brand new holster. He didn't mind waiting a couple extra days for that  |
|
Originally Posted By DavidY: You didn't show a picture of the wacky Mexican candy he sends I have several of his IWB holsters, two mag pouches and one of his wallets. I have been pleased with them. My original dagger holster had a small crack that showed directly where the mounting hardware mounts. That was after 2 years of daily use. Unfortunately, I didn't see it until after I had already sold it (since I had a light version I was using). I notified the seller that I was going to either refund him or see what I could do with the manufacturer. BH shipped me a replacement shell that day. I swapped the hardware over and sent the buyer an essentially brand new holster. He didn't mind waiting a couple extra days for that |
A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed.
|
Originally Posted By SouthernGunHand: Ha! Yeah this Enchilokas candy or however you spell it is kinda scary! My daughter thought one of them was cat turds, rolled in spices and put on a stick  We're in Texas, but obviously the whitest people ever! |
|
Originally Posted By SouthernGunHand: @Supra Quality is nice, fit is perfect, highly recommended! https://www.ar15.com/media/mediaFiles/159722/BT1-3097034.jpg https://www.ar15.com/media/mediaFiles/159722/BT2-3097035.jpg Awesome, you delivered! Looks good. Why no Concealment Wing? Now I just need to decide on color and if I want a custom graphic for $10. Tempting! I'm definitely getting one regardless. They seem like the only game in town for this handgun. Thanks. Also, am I the only one with a standard size (43X) Micro Dagger? Surely not, I've had it for over a month now and in my favorite color green. I'm glad I missed the all black standard size the previous week. |
|
I had Bordertown Holsters Make me a standard G19.5 with one of my favorite single panel comics. Attached File |
|
Originally Posted By Supra: Awesome, you delivered! Looks good. Why no Concealment Wing? Now I just need to decide on color and if I want a custom graphic for $10. Tempting! I'm definitely getting one regardless. They seem like the only game in town for this handgun. Thanks. Also, am I the only one with a standard size (43X) Micro Dagger? Surely not, I've had it for over a month now and in my favorite color green. I'm glad I missed the all black standard size the previous week. |
A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed.
|
Originally Posted By SouthernGunHand: @Supra Quality is nice, fit is perfect, highly recommended! https://www.ar15.com/media/mediaFiles/159722/BT1-3097034.jpg https://www.ar15.com/media/mediaFiles/159722/BT2-3097035.jpg Gonna need the details on that magwell.... |
|
Originally Posted By BruceLeroy: Gonna need the details on that magwell.... Jth_printed_designs on eBay. It is rough like sandpaper, but sandable. Best part is it's only 20 bucks. |
A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed.
