Posted: 3/30/2026 9:36:35 PM EDT
|
For a Tisas 9mm 1911 Carry. I know the K is a little narrower so does it fit the slide better or not that much of a difference? Anybody have pictures to share of your 1911 with optics and who milled your slide? |
Most recently I added an Olight to my Tisas. Just a trial for the brand but it did drop right on the tight K cut which made me happy. I had one milled by a company that failed and have a Holosun K on it.  I like the size factor on both of these vs the EPS which is wide in comparison. The guns point well and the dot is easy to index. The slides also swap between guns without issue. |
|
Originally Posted By downrivertrash: For a Tisas 9mm 1911 Carry. I know the K is a little narrower so does it fit the slide better or not that much of a difference? I got a spare optics ready slide for my Carry from SDS. I had a 507K on it and it fit perfectly. I later swapped the 507K to another gun and now I have a Swampfox Sentinel on there. |
|
Originally Posted By dogtired: Most recently I added an Olight to my Tisas. Just a trial for the brand but it did drop right on the tight K cut which made me happy. https://i.postimg.cc/PrZ2NmMx/IMG_5017.jpg I had one milled by a company that failed and have a Holosun K on it. https://i.postimg.cc/zfS1TLL1/IMG_9149.jpg I like the size factor on both of these vs the EPS which is wide in comparison. The guns point well and the dot is easy to index. The slides also swap between guns without issue. I have several Holosuns. I recently put on Osight SE on a Springfield Operator. I'm impressed with it and will probably continue getting Osights over the Holosuns. |
Nobody is coming. It's up to you.
|
Originally Posted By bluedog82: I had a 507K on a Prodigy for a little bit and it was definitely too small. Went to a full size EPS which was much better. I would also recommend the full size EPS. In the Pic below, you can see an EPS vs a 507K. Attached File |