Posted: 9/26/2024 4:18:14 PM EDT
|
Just FYI for people who might not be experts and want to save some time researching... For Dagger Compact and Dagger Fullsize-S Gen 5 G45 trigger bar (39701) Gen 5 G45 trigger housing (33667), with 47021 ejector Gen 3 trigger shoe will fit the frame better than a Gen 5 trigger shoe Gen 5 trigger housing works with no modification at all if you use a Gen 5 (33784) slide back plate. If you use a Gen 3 slide back plate you will need to trim the notch on the right side a bit to clear the trigger housing, etc. Utility blade can trim it nicely. In my sample size of only (1) Dagger Fullsize-S, with a really old 'dot' disconnnector I found rattling around in a coffee can and a Polymer 80 Flat Face trigger shoe, trigger pull is dramatically better. Less spongy take-up, crisp defined break and reset. |