G19 in the SF communities. (Page 29 of 45)
|
Originally Posted By Combat_Diver: Bet belt slides are a lot cheaper though. Riggers can make them No doubt. The Crye thing is a novel idea, but it’s a snag away from letting your pistol fall out. |
Dildos don't even make me raise an eyebrow anymore... you've got to have something a whole lot weirder than that in your rectum if you want to impress me. - TheGrayMan
|
Originally Posted By LsuJon: https://www.ar15.com/media/mediaFiles/316069/IMG_1124_jpeg-2852687.JPGCRF If a 19 gen 3 regularly came in the MOS version I’d buy one in a heartbeat. |
|
Originally Posted By BuckeyeRifleman: If a 19 gen 3 regularly came in the MOS version I’d buy one in a heartbeat. Originally Posted By BuckeyeRifleman: Originally Posted By LsuJon: https://www.ar15.com/media/mediaFiles/316069/IMG_1124_jpeg-2852687.JPGCRF If a 19 gen 3 regularly came in the MOS version I’d buy one in a heartbeat. Word. |
|
Originally Posted By Ivan1: Why a gen 3 vs a gen 4? I personally prefer the trigger on the gen 3. Some of my well worn gen 3 triggers are like butter… All my gen 4’s left something to be desired with the trigger. The “slicker” grip of the gen 3 is more comfortable for carry during long periods. The other part is nostalgia. A 19.3 was my first handgun purchase and my EDC for well over a decade. I’ve debated getting it milled to bring it into the modern era but want to leave it as is. |
|
Originally Posted By BuckeyeRifleman: I personally prefer the trigger on the gen 3. Some of my well worn gen 3 triggers are like butter… All my gen 4’s left something to be desired with the trigger. The “slicker” grip of the gen 3 is more comfortable for carry during long periods. The other part is nostalgia. A 19.3 was my first handgun purchase and my EDC for well over a decade. I’ve debated getting it milled to bring it into the modern era but want to leave it as is. Got it. Maybe I’m jaded cause I got rid of my gen3 19. The grip didn’t fit my hands very well and it wasn’t very accurate. I always thought it was me but I ended up measuring the lockup and it was at the very end of the loose spec. About the trigger, I never use to be a trigger snob but man I’ve been spoiled by good triggers now. |
Joined:
Feb 2023
Posts:
7
EE: 0% (0)
NJ, USA
|
Originally Posted By shuailili2013: https://www.guns.com/news/2021/09/13/glock-snags-15-million-us-army-contract Does that mean gen5 clone correct now?  Doesn't say SOCOM units only that U.S. Army Contracting Command, Newark, New Jersey was the contracting activity. Possibly for other countries we give money to. |
De Oppresso Liber
Iraq: 91,03,04,05,06,08,09,15,16,22’&23'
Afghanistan: 09,10,11',14',17',18',19',20'&21'
Iraq: 91,03,04,05,06,08,09,15,16,22’&23'
Afghanistan: 09,10,11',14',17',18',19',20'&21'
Joined:
Feb 2023
Posts:
8
EE: 0% (0)
NJ, USA
|
Originally Posted By shuailili2013: https://www.guns.com/news/2021/09/13/glock-snags-15-million-us-army-contract Does that mean gen5 clone correct now? Speaking of which, here is a 24th STS member with what looks like a simunition G19 gen 5 
|
Joined:
Nov 2022
Posts:
187
EE: 100% (7)
MI, USA
|
Originally Posted By M4AZ: https://i.postimg.cc/PqysB24V/BA291-C48-AAAF-42-CD-96-C8-66-B9-E307-FDE7.jpg HK 45? Tons of Sigs? What's this cache? |
|
Originally Posted By GrizzlyAtlas: DEVGRU with a gen 5? I'm not sure about this one. https://scontent.fmad21-1.fna.fbcdn.net/v/t39.30808-6/352329735_1750007192107243_4788982175921418207_n.jpg?stp=cp0_dst-jpg_e15_fr_q65&_nc_cat=109&ccb=1-7&_nc_sid=8024bb&_nc_ohc=LWJf55mJsPMAX8EjgFy&_nc_ht=scontent.fmad21-1.fna&oh=00_AfC-nd0QKPj-x52SI8paEyyhC2CEQ5nbYBcv-Ju9DEaDbA&oe=64B56BCA That does not look like a real military photo; rather, it has social media influencer vibes. The lower is missing the third pin. I have never seen an image of that optic (MRO?) used by NSW. It's hard to tell, but there are no obvious comms cables, which I would expect to see. ETA: Team Wendy helmet, too. |
|
Originally Posted By GrizzlyAtlas: DEVGRU with a gen 5? I'm not sure about this one. https://scontent.fmad21-1.fna.fbcdn.net/v/t39.30808-6/352329735_1750007192107243_4788982175921418207_n.jpg?stp=cp0_dst-jpg_e15_fr_q65&_nc_cat=109&ccb=1-7&_nc_sid=8024bb&_nc_ohc=LWJf55mJsPMAX8EjgFy&_nc_ht=scontent.fmad21-1.fna&oh=00_AfC-nd0QKPj-x52SI8paEyyhC2CEQ5nbYBcv-Ju9DEaDbA&oe=64B56BCA Nope. Photo shoot. |
|
Originally Posted By cmcflex: That does not look like a real military photo; rather, it has social media influencer vibes. The lower is missing the third pin. I have never seen an image of that optic (MRO?) used by NSW. It's hard to tell, but there are no obvious comms cables, which I would expect to see. ETA: Team Wendy helmet, too. Should have looked for the third pin! I figured as much, the MRO did throw me off but I was 50/50 on this one. |
|
Another 19 gen 5 in the wild. This photo is from a joint exercise between the 24th STS and french SF, the 416 doesn't have the heckler and Koch defense markings and it's an A5, which makes me think it's a Frenchie, but I thought their Glocks where 17s and had FDE frames, and all the accessories are very much US styled, from the TTI mag extension to the Daniel Defense irons. Thoughts? 
|
|
Originally Posted By GrizzlyAtlas: Another 19 gen 5 in the wild. This photo is from a joint exercise between the 24th STS and french SF, the 416 doesn't have the heckler and Koch defense markings and it's an A5, which makes me think it's a Frenchie, but I thought their Glocks where 17s and had FDE frames, and all the accessories are very much US styled, from the TTI mag extension to the Daniel Defense irons. Thoughts? https://i.imgur.com/xF0Kx7N.jpg I don’t know… everything about that guy’s gear looks way too clean to be from an actual military exercise. There’s not a spot on his uniform, gear, weapon, or helmet. Zooming in to look at his stock, for example, it looks fresh out of the box without a mark on it. The only thing that shows any wear at all is the extended baseplates on his pistol mags. It looks like he took everything else right out of the package, put it on, and knelt down for the photo. Maybe I’m wrong, but are you sure about the source of the photo? |
|
Originally Posted By 3ACR_Scout: I don't know everything about that guy's gear looks way too clean to be from an actual military exercise. There's not a spot on his uniform, gear, weapon, or helmet. Zooming in to look at his stock, for example, it looks fresh out of the box without a mark on it. The only thing that shows any wear at all is the extended baseplates on his pistol mags. It looks like he took everything else right out of the package, put it on, and knelt down for the photo. Maybe I'm wrong, but are you sure about the source of the photo? https://www.dvidshub.net/image/6540030/emerald-warrior-211-foreign-internal-defense-with-exercise-partners |
Make sure you tell guys that the 1911 is a pain in the ass - Larry Vickers
|
Originally Posted By Bradd_D: It appears that this is the source. https://www.dvidshub.net/image/6540030/emerald-warrior-211-foreign-internal-defense-with-exercise-partners Def not a photo shoot. |
Joined:
Feb 2022
Posts:
19
EE: 0% (0)
AUT
 I picked this up today with some other surplus stuff. I remember a while back these were considered a rare mag made exclusively for Delta. I know with the 19x out there now, dark earth mags are everywhere. Did they ever make a commercial .40 cal dark earth mag, or is this mag still rare? |
|
Originally Posted By PirateEC: https://i.postimg.cc/0yW2D2MG/BF38-D6-FC-2-EDF-4-DC0-8218-A0-F7-C1-FEAC0-E.jpg I picked this up today with some other surplus stuff. I remember a while back these were considered a rare mag made exclusively for Delta. I know with the 19x out there now, dark earth mags are everywhere. Did they ever make a commercial .40 cal dark earth mag, or is this mag still rare? Are this the same color as the 19x mags? I'm colorblind/colorstupid and I always thought the .40s where a shade darker |
|
Originally Posted By GrizzlyAtlas: Are this the same color as the 19x mags? I'm colorblind/colorstupid and I always thought the .40s where a shade darker I don’t have a 19x mag to compare it to side by side. It does seem darker, but it’s also well used and probably been whiped down more than once with a dirty CLP and carbon soaked rag too, so who knows. … and thanks Parabellum226 for the heads up. |
|
Attached File One of my commercial FDE .40 mags. They are dark from the factory |
|
Originally Posted By Parabellum226: Without turning this into a clone thread, ATEi does a solid job milling for a DPP and backup sight. I didn't remove the DPP to compare to my MOS3 plate, but visually it's damn close. It's pretty much a clone thread  Can you post some pics?
|
IG @bayou_bengal-rifles
|
Originally Posted By LsuJon: RTF2s are going for ridiculous money. It's a shame cause I could use a few more. Seriously, like the Gen3 ones? |
The world is a wild place. I've been around enough to see that I could do 99% of my job (as well as what I would really like to do) with a gun and a mag or two in my pockets.- Some Smart Guy
|
Originally Posted By LsuJon: yes. Originally Posted By LsuJon: Originally Posted By Screechjet1: Seriously, like the Gen3 ones? Like what level of price? |
The world is a wild place. I've been around enough to see that I could do 99% of my job (as well as what I would really like to do) with a gun and a mag or two in my pockets.- Some Smart Guy
|
Originally Posted By Parabellum226: https://i.imgur.com/MpogTs7l.jpg https://i.imgur.com/tQgxBCvl.jpg https://i.imgur.com/bSsLBDSl.jpg Originally Posted By Screechjet1: Like what level of price? |
IG @bayou_bengal-rifles
|
Originally Posted By Parabellum226: Without turning this into a clone thread, ATEi does a solid job milling for a DPP and backup sight. I didn’t remove the DPP to compare to my MOS3 plate, but visually it’s damn close. Chpws can do it as well and model it directly off of a mos3 |
|
Originally Posted By ChemTrailZ: Chpws can do it as well and model it directly off of a mos3 When I originally asked C&H, they said no. That answer might have changed since. Overall pleased with the ATEI route… they’ve consistently done good work, were pleasant to deal with, and I got it back exactly one month after putting it in the mailbox. |
|
Originally Posted By Parabellum226: When I originally asked C&H, they said no. That answer might have changed since. Overall pleased with the ATEI route… they’ve consistently done good work, were pleasant to deal with, and I got it back exactly one month after putting it in the mailbox. How long ago did you ask? They may no longer do it, and your answer may be more current as I was working with them over a year ago |
|
Originally Posted By ChemTrailZ: How long ago did you ask? They may no longer do it, and your answer may be more current as I was working with them over a year ago I called within the last year. I assumed they’d have the specs given the rear sight they make for the Mos3 and the mos3 photos they posted, but the gentleman on the phone indicated they didn’t have the programming to make that cut. Editing to say “that cut” means the exact MOS3 cut, not generally milling for a DPP and rear sight. |