G19 in the SF communities. (Page 27 of 45)
|
Orange inspection end plate. You can make your own by cutting legs of standard end plate. Also inspection of contact between firing pin and sear Attached File Attached File Look at bottom center below plate Attached File |
De Oppresso Liber
Iraq: 91,03,04,05,06,08,09,15,16,22’&23'
Afghanistan: 09,10,11',14',17',18',19',20'&21'
Iraq: 91,03,04,05,06,08,09,15,16,22’&23'
Afghanistan: 09,10,11',14',17',18',19',20'&21'
|
Originally Posted By Miami_JBT: Hey @Combat_Diver, I have an oddball request. You have any photos and info the S&W Sigmas used over in the sandbox? And if you do, can I use them for an article I'm writing, with your permission and credit given to you for your photos and info? I've only come across that one battlefield pickup I've posted. ODA gave it to us without a story in Astan. |
De Oppresso Liber
Iraq: 91,03,04,05,06,08,09,15,16,22’&23'
Afghanistan: 09,10,11',14',17',18',19',20'&21'
Iraq: 91,03,04,05,06,08,09,15,16,22’&23'
Afghanistan: 09,10,11',14',17',18',19',20'&21'
|
Attached File |
De Oppresso Liber
Iraq: 91,03,04,05,06,08,09,15,16,22’&23'
Afghanistan: 09,10,11',14',17',18',19',20'&21'
Iraq: 91,03,04,05,06,08,09,15,16,22’&23'
Afghanistan: 09,10,11',14',17',18',19',20'&21'
|
Attached File Attached File Attached File |
De Oppresso Liber
Iraq: 91,03,04,05,06,08,09,15,16,22’&23'
Afghanistan: 09,10,11',14',17',18',19',20'&21'
Iraq: 91,03,04,05,06,08,09,15,16,22’&23'
Afghanistan: 09,10,11',14',17',18',19',20'&21'
|
Originally Posted By Combat_Diver: https://www.ar15.com/media/mediaFiles/32677/650412ED-4264-469B-95B9-1A20E840C809_jpe-2693449.JPG |
Make sure you tell guys that the 1911 is a pain in the ass - Larry Vickers
|
Originally Posted By Combat_Diver: https://www.ar15.com/media/mediaFiles/32677/469FE103-B702-4D7B-A01C-BA90A51C9945_jpe-2693667.JPGhttps://www.ar15.com/media/mediaFiles/32677/356B766A-4588-48B7-A7B9-D4022D29EA0E_jpe-2693668.JPGhttps://www.ar15.com/media/mediaFiles/32677/2448960A-E615-4445-A76E-08FB257F2357_jpe-2693669.JPG @Combat_Diver huge ask, but any chance you can measure the bottom of the slide to the top of the mos plate on the slide? I’ve been trying to figure out the factory depth of the mos plate forever but don’t have a factory mos to measure(best I can guesstimate is it’s .090-.100 in depth) |
|
Originally Posted By ChemTrailZ: @Combat_Diver huge ask, but any chance you can measure the bottom of the slide to the top of the mos plate on the slide? I’ve been trying to figure out the factory depth of the mos plate forever but don’t have a factory mos to measure(best I can guesstimate is it’s .090-.100 in depth) See what I can do. Gun is out of the shop. |
De Oppresso Liber
Iraq: 91,03,04,05,06,08,09,15,16,22’&23'
Afghanistan: 09,10,11',14',17',18',19',20'&21'
Iraq: 91,03,04,05,06,08,09,15,16,22’&23'
Afghanistan: 09,10,11',14',17',18',19',20'&21'
|
Originally Posted By Combat_Diver: Orange inspection end plate. You can make your own by cutting legs of standard end plate. Also inspection of contact between firing pin and sear https://www.ar15.com/media/mediaFiles/32677/5515CD03-70BA-4088-8AC6-DCB181998512_jpe-2693428.JPGhttps://www.ar15.com/media/mediaFiles/32677/338F8C59-1637-4B20-BB85-051AC7411F16_jpe-2693429.JPG Look at bottom center below plate https://www.ar15.com/media/mediaFiles/32677/EF572718-2EA7-4457-A9BE-52AE4EF47FFF_jpe-2693430.JPG I really appreciate all of the fucking awesome insight, experience, and educational content you bring to this site. You continue to make this thread epic. 
|
"Do not put yourself at the mercy of people who have none" - Paul Howe
|
Originally Posted By PabloMcGlock: I really appreciate all of the fucking awesome insight, experience, and educational content you bring to this site. You continue to make this thread epic. Originally Posted By PabloMcGlock: Originally Posted By Combat_Diver: Orange inspection end plate. You can make your own by cutting legs of standard end plate. Also inspection of contact between firing pin and sear https://www.ar15.com/media/mediaFiles/32677/5515CD03-70BA-4088-8AC6-DCB181998512_jpe-2693428.JPGhttps://www.ar15.com/media/mediaFiles/32677/338F8C59-1637-4B20-BB85-051AC7411F16_jpe-2693429.JPG Look at bottom center below plate https://www.ar15.com/media/mediaFiles/32677/EF572718-2EA7-4457-A9BE-52AE4EF47FFF_jpe-2693430.JPG I really appreciate all of the fucking awesome insight, experience, and educational content you bring to this site. You continue to make this thread epic. Yes! Mahalo to CD  |
PSALMS 144-1
|
Originally Posted By Combat_Diver: They are and you're missing a few. Pistol actually belonged to my son's detachment. https://www.ar15.com/media/mediaFiles/32677/IMG_2270_JPG-2663564.JPG https://www.ar15.com/media/mediaFiles/32677/IMG_2272_JPG-2663565.JPG Yes, Glock barrel https://www.ar15.com/media/mediaFiles/32677/IMG_2273_JPG-2663567.JPG https://www.ar15.com/media/mediaFiles/32677/IMG_2274_JPG-2663568.JPG Anyone know if these sights were all black or tritium sights? Hard to tell from available photos but appear to be all black |
|
Originally Posted By M4AZ: Mk27's with factory Glock LH threaded barrels. https://i.postimg.cc/kGT8zCMt/75-B63-DEC-A7-EC-4-FFA-98-A7-13-AC61-B583-AA.jpg One of these are also my hunting rig this week  https://i.postimg.cc/L6Z6rRsK/D16-A6-B04-9-F9-A-4-ED9-AF96-F9-E78-A71-F0-A0.jpg |
IG @bayou_bengal-rifles
|
Originally Posted By Boom_Stick: @M4AZ How do you like that sig suppressor? Its stackable for custom length and all Ti right? Yeah it can go long to super short Attached File I like it, super lightweight and overall has been pretty accurate for me with not much shift. Haven’t shot it much outdoor with different lengths but i did with three baffles off and supersonic and it at least still took the bite off it. |
We are not citizens, We are suspects.
|
This thread reminded me of what I believe is a Mk27 Mod 0, it seems the PN is appropriate? Got this some time back during one of those cyclical $250-300 Glock times. Unfortunately the guy was in a ban state and sent me 10 rounders so he could keep his 15's, I need to fix that. Attached File |
|
Originally Posted By DStepec: This thread reminded me of what I believe is a Mk27 Mod 0, it seems the PN is appropriate? Got this some time back during one of those cyclical $250-300 Glock times. Unfortunately the guy was in a ban state and sent me 10 rounders so he could keep his 15's, I need to fix that. https://www.ar15.com/media/mediaFiles/277783/ED7E8E6E-A869-4CE0-80EF-601BA9E595B2_jpe-2711080.JPG Looks nice and clean, unusual for this thread! 
|
|
Originally Posted By ChemTrailZ: @Combat_Diver huge ask, but any chance you can measure the bottom of the slide to the top of the mos plate on the slide? I’ve been trying to figure out the factory depth of the mos plate forever but don’t have a factory mos to measure(best I can guesstimate is it’s .090-.100 in depth) Bottom of slide to top of MOS plate .830" Bottom of slide to bottom of MOS plate .640" MOS plate .188"-.190" CD |
De Oppresso Liber
Iraq: 91,03,04,05,06,08,09,15,16,22’&23'
Afghanistan: 09,10,11',14',17',18',19',20'&21'
Iraq: 91,03,04,05,06,08,09,15,16,22’&23'
Afghanistan: 09,10,11',14',17',18',19',20'&21'
|
Naval Special Warfare with a mk27 mod 2, looks like he's using the beavertail backstrap and a TTI mag extension. Link  |
|
Originally Posted By LewisMeriwether: Do sf glocks have different internals? If I recall the 19x comes w a metal guide rod? Is there a reason to consider replacing polymer / plastic internal components w metal bits? Majority are Gen 3 with standard Gen 3 parts. There are a very few Gen 4 models. |
De Oppresso Liber
Iraq: 91,03,04,05,06,08,09,15,16,22’&23'
Afghanistan: 09,10,11',14',17',18',19',20'&21'
Iraq: 91,03,04,05,06,08,09,15,16,22’&23'
Afghanistan: 09,10,11',14',17',18',19',20'&21'
|
Originally Posted By LewisMeriwether: Do sf glocks have different internals? If I recall the 19x comes w a metal guide rod? Is there a reason to consider replacing polymer / plastic internal components w metal bits? The 19X comes with a standard Gen5 polymer guide rod, no metal. |
Steve
|
Originally Posted By Combat_Diver: Bottom of slide to top of MOS plate .830" Bottom of slide to bottom of MOS plate .640" MOS plate .188"-.190" CD Thanks! When you say bottom of mos plate do you mean this dimension? Attached File My calipers must be off because this is what I’m getting for overall slide height Attached File |
|
Originally Posted By Combat_Diver: Bottom of slide to top of MOS plate .830" Bottom of slide to bottom of MOS plate .640" MOS plate .188"-.190" CD Thank you sir I wonder if my calipers are off, as that would only give a depth of .02 or so on the cut depth of the mos plate, here’s my slide measurement Attached File |
|
My calibers Attached File |
De Oppresso Liber
Iraq: 91,03,04,05,06,08,09,15,16,22’&23'
Afghanistan: 09,10,11',14',17',18',19',20'&21'
Iraq: 91,03,04,05,06,08,09,15,16,22’&23'
Afghanistan: 09,10,11',14',17',18',19',20'&21'
|
Originally Posted By Combat_Diver: Majority are Gen 3 with standard Gen 3 parts. There are a very few Gen 4 models. Originally Posted By Combat_Diver: Originally Posted By LewisMeriwether: Do sf glocks have different internals? If I recall the 19x comes w a metal guide rod? Is there a reason to consider replacing polymer / plastic internal components w metal bits? Majority are Gen 3 with standard Gen 3 parts. There are a very few Gen 4 models. Is there a plan to move to Gen 5 MOS guns or to a 320? |
|
Originally Posted By FedDC: Is there a plan to move to Gen 5 MOS guns or to a 320? No clue on the Gen 5 but doubtful. M17/M18 are issued by the Services to their forces which SOF are part of it. Thats why you see Mk27 along side M17 on ODAs. M17 replaced M9. |
De Oppresso Liber
Iraq: 91,03,04,05,06,08,09,15,16,22’&23'
Afghanistan: 09,10,11',14',17',18',19',20'&21'
Iraq: 91,03,04,05,06,08,09,15,16,22’&23'
Afghanistan: 09,10,11',14',17',18',19',20'&21'
|
Originally Posted By Combat_Diver: My calibers https://www.ar15.com/media/mediaFiles/32677/98789D92-A766-46FC-B53C-0E961C099E9A_jpe-2720317.JPG Ok gotcha, yeah my calipers are off then, remeasured a few times and the measurement changed by .1-.14 In any event was hoping to get the measurement of the mos optic plate not the filler plate, but I will finally have access to an oem one to measure this weekend, but appreciate you trying to help out! |
|
Originally Posted By Combat_Diver: No clue on the Gen 5 but doubtful. M17/M18 are issued by the Services to their forces which SOF are part of it. Thats why you see Mk27 along side M17 on ODAs. M17 replaced M9. Originally Posted By Combat_Diver: Originally Posted By FedDC: Is there a plan to move to Gen 5 MOS guns or to a 320? No clue on the Gen 5 but doubtful. M17/M18 are issued by the Services to their forces which SOF are part of it. Thats why you see Mk27 along side M17 on ODAs. M17 replaced M9. If I had a guess, the M17 will eventually take over from the Glocks as there will be more of them in General issue, And guys who grow up on the green side using the M17 will gravitate towards them on the SF side. |
Just Drop... Buckethead!
|
Originally Posted By Parabellum226: https://i.imgur.com/nYeptlIl.jpg https://i.imgur.com/o067sPYl.jpg Please let me know if this doesn't belong here. LH threaded barrel? Are you selling LOL |
|
Originally Posted By Harv24: If I had a guess, the M17 will eventually take over from the Glocks as there will be more of them in General issue, And guys who grow up on the green side using the M17 will gravitate towards them on the SF side. You get an issued Staccato-ish pistol from Uncle. |
|
Originally Posted By Sinister: Eventually some guys are going to try the Brouwer M1811 grip and find they can get a trigger job on the M17/M18 that comes damn close to a 1911. You get an issued Staccato-ish pistol from Uncle. Originally Posted By Sinister: Originally Posted By Harv24: If I had a guess, the M17 will eventually take over from the Glocks as there will be more of them in General issue, And guys who grow up on the green side using the M17 will gravitate towards them on the SF side. You get an issued Staccato-ish pistol from Uncle. That's a pretty damn cool grip. |
Just Drop... Buckethead!
|
Originally Posted By Sinister: Eventually some guys are going to try the Brouwer M1811 grip and find they can get a trigger job on the M17/M18 that comes damn close to a 1911. You get an issued Staccato-ish pistol from Uncle. I have to admit, I was not prepared to like the M18 anywhere as much as I do. |
The world is a wild place. I've been around enough to see that I could do 99% of my job (as well as what I would really like to do) with a gun and a mag or two in my pockets.- Some Smart Guy
|
Originally Posted By Dude59: Local find. Looks unfired, came with a vortex red dot attached and was promptly removed. https://i.imgur.com/tAUWgwX.jpg https://i.imgur.com/ABwSFnB.jpg https://i.imgur.com/artxk1A.jpg |
IG @bayou_bengal-rifles
|
Looks like there was a mix of gen 5 17's and mk27s at the USASOC International Sniper Competition Link  
|
What have the Romans ever done for us?
Joined:
Jul 2008
Posts:
39235
EE: 100% (212)
TN, USA
|
If I have a 19.5 and wanted to make a MK27-ish clone, what do I need as the basics (aside from correct 19)? Slide will need to be milled, but what sights are correct for the RMR or is that up to person/unit? |
Panem et Circenses
I have also learned from experience that the greater part of our happiness or misery depends upon our dispositions, and not upon our circumstances.
I have also learned from experience that the greater part of our happiness or misery depends upon our dispositions, and not upon our circumstances.
|
Attached File Attached File |
De Oppresso Liber
Iraq: 91,03,04,05,06,08,09,15,16,22’&23'
Afghanistan: 09,10,11',14',17',18',19',20'&21'
Iraq: 91,03,04,05,06,08,09,15,16,22’&23'
Afghanistan: 09,10,11',14',17',18',19',20'&21'
Joined:
Nov 2022
Posts:
141
EE: 100% (7)
MI, USA
|
Originally Posted By Finslayer83: If I have a 19.5 and wanted to make a MK27-ish clone, what do I need as the basics (aside from correct 19)? Slide will need to be milled, but what sights are correct for the RMR or is that up to person/unit? Trijicon suppressor height night sights. Or the Glock metal night sights. |
We are not citizens, We are suspects.
|
Rangers with MOS3s for the sniper comp. Attached File Attached File Attached File Attached File |
IG @bayou_bengal-rifles
|
Does anyone know what the deal is with these Glock's? They look like third gen with aftermarket slides, and they don't seem like a one of, since in one picture you can see a couple of dudes with the same setup. This is the description of the photo in the source. 306th Rescue Squadron pararescuemen fire Glock 19 pistols at targets during their annual weapons qualification training course near Davis-Monthan Air Force Base, Arizona, April 3, 2023. The purpose of this course is to refine the basic combat marksmanship skills of 306th RQS pararescuemen , ensuring they maintain their combat readiness with the Glock 19 as well as the M4A1 carbine weapons. (U.S. Air Force photo by Senior Airman Nicole Koreen)    
|
