Posted: 4/6/2016 2:32:02 PM EDT
|
Greetings,
Anybody have one and feel like doing me a solid? |
|
I have an Executive Carry, what measurements do you need?
Decent pistol, but i think Para went really cheap on the finish machining. The front of the dust cover and the bottom of the slide have a real sharp edges, and there's no stipple on the front strap or the MSH. The bull barrel makes it heavy for such a small piece, even with the alloy frame. It weighs as much empty as my S&W SC1911 commander does loaded with 9 rounds. The single sided safety is nice for a carry gun as well as the bob tail. The only other thing I did to mine was add the CT grips (it's a 3" barrel, sight radius sucks), and switched to flat bottom mags. |
|
Ok, here is what I measured.
Right side rail is 3.387 in length. It runs from the rear to just in front of the take down lever hole. Left side is 3.384 with the gap at 2.011 from the rear and 1.187 from the front. Hope it helps, and please finish the frame better than Para did. Good luck. |