User Panel
User Panel
User Panel
|
Posted: 2/20/2011 11:34:28 PM EST
[Last Edit: SGB]
I thought it was about time we had a 1911 pay it forward thread. SGB was nice enough to allow this, so let's make the most of it.
Have any extra bits laying around that someone else could use? Here is your chance to earn some karma, and maybe pick up that item that you've been meaning to get  These are the rules. - Post a 1911 related item you no longer need or use. - The First to respond with an I'll take it posted in the thread has claim to the item. - Keep ALL transactions legal and above board. All transactions to be conducted within the thread itself and NO IM/Email transactions other than shipping information. This keeps the back door snipers out of the picture and no one will get upset over a lost opportunity. - Postage is to be worked out via IM or Email by the giver and the receiver. - Multiple items are allowed in such that ... "I have 5 of these who wants ONE ?" This gives 5 different people involved in the process. Not someone grabbing all 5 of the items. Lets be friendly AND fair in this. - FEEDBACK, this is a friendly giveaway/trade transaction and not a buy/sell transaction. So feedback isn't necessarily required by EE standards. So if feedback is posted by some and not by others don't get your whitey tighties in a bunch if it doesn't happen. THERE IS TO BE NO SELLING OR TRADING OF ITEMS. ETA: 03-18-2011 -Gentlemen if you offer an item up as available and then fail to follow through on delivering the item to the member who claims it you will at minimum be locked out of this forum.- SGB 
|
|
|
|
|
Posted: 2/20/2011 11:36:25 PM EST
[#1]
Figure since this is my thread, I'll be the first up.
2 Tripp 45Flex followers. FOL-FLX-45 Brandy new, bought on mistake. First I'll take it, gets them. |
|
|
|
|
Posted: 2/21/2011 11:40:33 AM EST
[#2]
I've got an STI FLGR and plug from an STI Trojan.
|
|
|
|
|
Posted: 2/21/2011 2:20:34 PM EST
[#3]
I'll take the FLGR if it's for a 5"
I'd like to offer up a Novak rear night site (takeoff from a Springfield Champion 4") and a stainless single side safety lever (takeoff from a Colt Delta Elite) |
|
|
|
|
Posted: 2/21/2011 4:50:07 PM EST
[Last Edit: DoubleARon]
[#4]
It's for a 5". IM me with your address.
ETA: Just noticed you're USAF retired. I won't hold that against you. |
|
|
|
FL, USA
|
Posted: 2/21/2011 7:22:05 PM EST
[#5]
Originally Posted By Colt45guy:
I'll take the FLGR if it's for a 5"
I'd like to offer up a Novak rear night site (takeoff from a Springfield Champion 4") and a stainless single side safety lever (takeoff from a Colt Delta Elite) I would like these please. As a New 1911 guy I do not have much BUT if some one wants a either a Tapco AK grip or a standard AR grip just PM me. |
|
|
TN, USA
|
Posted: 2/21/2011 9:32:20 PM EST
[Last Edit: LittleMagic]
[#6]
|
|
|
|
Posted: 2/21/2011 10:59:35 PM EST
[#7]
I'll Take the Tripp Followers CombatMP.
And I will offer up a Wilson Drop In Bevertail. Should still have the bag and everything. . .
|
|
|
|
OR, USA
|
Posted: 2/21/2011 11:02:57 PM EST
[Last Edit: CodeSeven]
[#8]
I could really use the stainless thumb safety if it's still up for grabs. I would also like to throw in a blued serrated full size mainspring housing. claimed by WindRiver78
|
|
|
FL, USA
|
Posted: 2/21/2011 11:31:03 PM EST
[Last Edit: irag2362]
[#9]
Originally Posted By LittleMagic:
Originally Posted By Colt45guy:
I'll take the FLGR if it's for a 5"
I'd like to offer up a Novak rear night site (takeoff from a Springfield Champion 4") and a stainless single side safety lever (takeoff from a Colt Delta Elite) I'll take the rear novak sight. Since someone failed to read the rules (#5) ;) I disagree, I read the rules and feel I was following them. the rule(#5) states Multiple items which I take for example "5 sets of grips" , the post was for 2 different items of 1 qty each. I requested both items which is in my interpretation following the rules. I have also emailed the poster requesting his address so I may send postage along with my address for the items. 
and CombatMP great idea for the 1911 section. |
|
|
|
Posted: 2/22/2011 2:58:28 AM EST
[#10]
Originally Posted By MercuryHayze:
I'll Take the Tripp Followers CombatMP. And I will offer up a Wilson Drop In Bevertail. Should still have the bag and everything. . . i'll take the beavertail if its still up for grabs |
|
|
|
|
Posted: 2/22/2011 5:38:15 AM EST
[#11]
Originally Posted By irag2362:
Originally Posted By LittleMagic:
Originally Posted By Colt45guy:
I'll take the FLGR if it's for a 5"
I'd like to offer up a Novak rear night site (takeoff from a Springfield Champion 4") and a stainless single side safety lever (takeoff from a Colt Delta Elite) I'll take the rear novak sight. Since someone failed to read the rules (#5) ;) I disagree, I read the rules and feel I was following them. the rule(#5) states Multiple items which I take for example "5 sets of grips" , the post was for 2 different items of 1 qty each. I requested both items which is in my interpretation following the rules. I have also emailed the poster requesting his address so I may send postage along with my address for the items.
and CombatMP great idea for the 1911 section. Sorry LittleMagic––-I've gotta go with irag2362 on this one. First to post, and it is for single items. Just so both irag2362 and LittleMagic know, this Novak only works on the short 1911s. It'll shoot really high on a 5". |
|
|
|
FL, USA
|
Posted: 2/22/2011 5:50:32 AM EST
[#12]
thanks for the reply on the sight.. I do have a 5" SA GI but would still like the safety if I could please.
|
|
|
|
Posted: 2/24/2011 12:30:35 AM EST
[#13]
Originally Posted By lostman518:
Originally Posted By MercuryHayze:
I'll Take the Tripp Followers CombatMP. And I will offer up a Wilson Drop In Bevertail. Should still have the bag and everything. . . i'll take the beavertail if its still up for grabs Damn...I should check here more often. 
Well I have some Mil Spec parts, mainspring housing, thumb safety, hammer, etc. Looking for a Drop in Beavertail, loop hammer, stainless trigger.... |
|
|
|
|
Posted: 2/25/2011 12:13:11 AM EST
[#14]
Originally Posted By wrightone:
Originally Posted By lostman518:
Originally Posted By MercuryHayze:
I'll Take the Tripp Followers CombatMP. And I will offer up a Wilson Drop In Bevertail. Should still have the bag and everything. . . i'll take the beavertail if its still up for grabs Damn...I should check here more often.
Well I have some Mil Spec parts, mainspring housing, thumb safety, hammer, etc. Looking for a Drop in Beavertail, loop hammer, stainless trigger.... I could use the mil spec parts. I have an unknown maker stainless extended slide stop and safety. |
|
|
|
|
Posted: 3/18/2011 3:11:04 PM EST
[#15]
Originally Posted By Colt45guy: I'll take the FLGR if it's for a 5" I'd like to offer up a Novak rear night site (takeoff from a Springfield Champion 4") and a stainless single side safety lever (takeoff from a Colt Delta Elite) Did you get the package? |
|
|
|
|
Posted: 3/18/2011 4:27:21 PM EST
[Last Edit: SGB]
[#16]
Since someone failed to read the rules (#5) ;) If ANYONE has a problem and thinks any of the rules set forth have been violated please IM me rather than turn it into a open squabble in this form. SGB |
|
|
|
FL, USA
|
Posted: 3/18/2011 7:54:48 PM EST
[#17]
has anyone heard from Colt45guy? he was going to send me some stuff but nothing showed and he hasn't answered emails, anyone know him? is he ok?
|
|
|
|
Posted: 3/18/2011 9:04:01 PM EST
[#18]
Originally Posted By irag2362: has anyone heard from Colt45guy? he was going to send me some stuff but nothing showed and he hasn't answered emails, anyone know him? is he ok? Last Login Date: 3/18/2011 9:51:49 PM EDT Last Post Date: 3/15/2011 8:33:06 PM EDT |
|
|
|
|
Posted: 3/18/2011 9:06:26 PM EST
[#19]
Gentlemen if you offer an item up as available and then fail to follow through on delivering the item to the member who claims it you will at minimum be locked out of this forum.
|
|
|
|
|
Posted: 4/4/2011 1:56:01 PM EST
[Last Edit: azlester]
[#20]
t is a shame that this thread has not been better received. When these pay it forward threads work they work very well indeed. Unfortunately the only extra/spare 1911 stuff I had sold at the last garage sale I had or I would be putting up some items.
If you offer up something, please make sure that you follow through. On other forums when I have offered up items and followed through the payback I received far outweighed the value of the items. Payback isn't always going to be something you can put your hands on...more times then not it is the good feeling you get by helping a person achieve something they may not or couldn't have done on their own. Just my $.02 worth for a Monday morning |
|
|
|
|
Posted: 4/4/2011 2:47:04 PM EST
[#21]
Let's get this thread back on track.
I have a stainless steel Wilson Combat drop-in beavertail intended to fit a Colt Government. I may have some other stuff I have no use for, will update when I get home. |
|
|
|
|
Posted: 4/4/2011 3:01:47 PM EST
[Last Edit: jdubya87]
[#22]
I have a set of wraparound hogue grips lying around in my garage, govt size. They are kind of dry, but for a range gun, should suffice for anybody who wants them.
|
|
|
|
FL, USA
|
Posted: 4/4/2011 7:47:33 PM EST
[Last Edit: irag2362]
[#23]
Originally Posted By ken_mays:
Let's get this thread back on track. I have a stainless steel Wilson Combat drop-in beavertail intended to fit a Colt Government. I may have some other stuff I have no use for, will update when I get home. was it modified already? if not I will take it! if there is a matching hammer,I wont be shy and request it too..lol .
I have a SA GI trigger, MSH and slide release I can offer up. |
|
|
AZ, USA
|
Posted: 4/4/2011 8:21:44 PM EST
[#24]
Originally Posted By irag2362:
I have a SA GI trigger, MSH and slide release I can offer up. If the slide stop is blued, and GI short style I would like it please. |
|
|
|
Posted: 4/4/2011 8:25:05 PM EST
[#25]
Originally Posted By irag2362:
Originally Posted By ken_mays:
Let's get this thread back on track. I have a stainless steel Wilson Combat drop-in beavertail intended to fit a Colt Government. I may have some other stuff I have no use for, will update when I get home. was it modified already? if not I will take it! if there is a matching hammer,I wont be shy and request it too..lol .
I have a SA GI trigger, MSH and slide release I can offer up. It hasn't been fitted. PM me your address and I'll get it out to you. |
|
|
|
FL, USA
|
Posted: 4/4/2011 8:31:16 PM EST
[Last Edit: irag2362]
[#26]
awesome thanks...
as I said before I have a SA GI trigger, MSH and slide release I can offer up. as well as a AR grip and a AK grip. |
|
|
|
Posted: 4/4/2011 10:13:54 PM EST
[Last Edit: THOLL223]
[#27]
Got a Wilson Extended Slide Release, stainless glass beaded up for grabs. Headed out to johnnypantz!
 |
|
|
|
|
Posted: 4/5/2011 5:52:19 AM EST
[Last Edit: johnnypantz]
[#28]
Originally Posted By THOLL223:
Got a Wilson Extended Slide Release, stainless glass beaded up for grabs. ] I'll take this please, recieved it today! thanks THoll223 Posted Via AR15.Com Mobile |
|
|
|
WA, USA
|
Posted: 4/5/2011 1:56:16 PM EST
[#29]
Originally Posted By CodeSeven:
I could really use the stainless thumb safety if it's still up for grabs. I would also like to throw in a blued serrated full size mainspring housing. I could use the blued serrated MSH if it's still available. I have a govt. slide stop of unknown origin if anyone would like to have it. |
|
|
|
Posted: 4/9/2011 11:47:24 PM EST
[#30]
Originally Posted By irag2362:
awesome thanks... as I said before I have a SA GI trigger, MSH and slide release I can offer up. as well as a AR grip and a AK grip. I could really use the trigger. I still have a stainless extended slide stop and safety available |
|
|
|
FL, USA
|
Posted: 4/10/2011 4:17:58 AM EST
[#31]
Originally Posted By KJB:
Originally Posted By irag2362:
awesome thanks... as I said before I have a SA GI trigger, MSH and slide release I can offer up. as well as a AR grip and a AK grip. I could really use the trigger. I still have a stainless extended slide stop and safety available trigger is on the way .. |
|
|
|
Posted: 4/12/2011 2:40:51 PM EST
[Last Edit: THOLL223]
[#32]
 |
|
|
|
|
Posted: 4/12/2011 5:25:15 PM EST
[#33]
Originally Posted By KJB:
Originally Posted By irag2362:
awesome thanks... as I said before I have a SA GI trigger, MSH and slide release I can offer up. as well as a AR grip and a AK grip. I could really use the trigger. I still have a stainless extended slide stop and safety available I will take both of those if they are still available. |
|
|
|
FL, USA
|
Posted: 4/14/2011 3:58:11 AM EST
[#34]
NVG dude, sorry the parts are gone.. I didnt see your post till now.
|
|
|
|
Posted: 11/19/2012 7:17:01 PM EST
[#35]
I have a like new set of Hogue finger grove grips of a Colt Defender
|
|
|
|
|
Posted: 11/19/2012 9:23:29 PM EST
[#36]
I'll take the defender grips if still available PM sent
|
|
|
|
|
Posted: 11/19/2012 9:30:23 PM EST
[Last Edit: SleeperShooter]
[#37]
-SleeperShooter
ETA: Damn that was quick!! They're spoken for. |
|
|
|
WV, USA
|
Posted: 12/6/2012 8:06:09 AM EST
[Last Edit: UNIT6639]
[#38]
I have some stuff in my basement taking up space.
Stainless grip screws, slotted Plastic flat MSH, looks to have been painted black, no internals Stainless Arched MSH Plastic short trigger Faux stag head grips for full size frame I could use a right hand holster and a beavertail for a full size frame. |
|
|
|
Posted: 12/6/2012 10:43:43 AM EST
[#39]
I could us a flat govt MSH and even anyone base any govt ambi grips laying around I could use some badly.. I don't have much for 1911 but I have some ar a2 grips laying sound if anyone Need's some
|
|
|
KY, USA
|
Posted: 12/7/2012 11:25:21 PM EST
[#40]
Originally Posted By UNIT6639:
I have some stuff in my basement taking up space. Stainless grip screws, slotted Stainless Arched MSH Plastic short trigger Faux stag head grips for full size frame I could use a right hand holster and a beavertail for a full size frame. id like this if still available. . |
|
|
|
Posted: 12/7/2012 11:46:25 PM EST
[#41]
Originally Posted By leveractionjackson:
I have a like new set of Hogue finger grove grips of a Colt Defender Holy year and a half bump batman!!! 
I have some stuff in the parts box. I need to go through it tomorrow but I'll put them up here. |
|
|
|
WV, USA
|
Posted: 12/8/2012 5:19:33 AM EST
[#42]
Sorry, I didnt realize this thread was that old. JM2, the MSH is yours.
|
|
|
|
Posted: 12/8/2012 6:11:08 AM EST
[#43]
Originally Posted By UNIT6639:
I have some stuff in my basement taking up space. Stainless grip screws, slotted Stainless Arched MSH Plastic short trigger Faux stag head grips for full size frame I could use a right hand holster and a beavertail for a full size frame. I could use the Faux Stag grips and I have a Wilson drop in stainless beavertail..... It has been bead blasted but its in great shape..... |
|
|
|
WV, USA
|
Posted: 12/8/2012 6:39:46 AM EST
[#44]
IM sent rod, grips are yours! And I will take the wilson grip safety.
|
|
|
WV, USA
|
Posted: 12/8/2012 6:49:54 AM EST
[Last Edit: UNIT6639]
[#45]
Ok, Faux stag grips are gone to Rod727
MSH is gone to JM2 I also could use a stainless bushing and a set of thin grips for a full size if anyone has some they dont need. I also have a set of full size cocobolo non ambi grips I wont be using , anybody is welcome to any of the stuff I listed. |
|
|
|
Posted: 12/8/2012 4:28:58 PM EST
[Last Edit: 1969GTX]
[#46]
#1 Springfield Mil-Spec trigger, circa 2002. #2 Springfield Mil-Spec arched msh w/ ILS, no guts. Serrations removed, checkering added. #3 Wilson SS barrel bushing. UNIT6639 has dibs #4 Group Gripper spring guide and link. Originally purchased from WC back around 2004. Helps lock-up on loose fitting barrels One item per member please. If you want something, post it below and send me an im w/ shipping info. Merry Christmas 
|
|
|
|
KY, USA
|
Posted: 12/8/2012 10:51:47 PM EST
[#47]
Originally Posted By UNIT6639:
Ok, Faux stag grips are gone to Rod727 MSH is gone to JM2 I also could use a stainless bushing and a set of thin grips for a full size if anyone has some they dont need. I also have a set of full size cocobolo non ambi grips I wont be using , anybody is welcome to any of the stuff I listed. i hate to ask for so much but i could really use the non ambi grips too. i hate the ambi grips on my non ambi gun! |
|
|
WV, USA
|
Posted: 12/9/2012 9:57:56 AM EST
[#48]
JM2, I will throw the grips in with the MSH.
|
|
|
WV, USA
|
Posted: 12/9/2012 9:59:55 AM EST
[#49]
IM sent on the SS Wilson Bushing.
|
|
|
KY, USA
|
Posted: 12/9/2012 11:19:44 AM EST
[#50]
i appreciate it.
anyone want a set a smith and wesson j frame uncle mikes rubber grips let me know |
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2023 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
