Posted: 11/9/2016 7:35:22 PM EDT
|
I own a pawnshop, and had one of these come through. Customer did not come back, put out for sale. Good customer of ours picked it up, brought it back same day. Wont feed at least half the time, full mag, last round, no difference. Looks like the barrel has been polished way too much, parts of the ramp have been ground/polished away. Rounds just jam straight into the ramp, sometimes catch at a 45* angle, etc etc.
Thought about buying a barrel, but they are not available as far as I can see, and its obviously been modified. Any options/opinions? |
***Edit 11/11 Ordered a mecgar mag, still available, we'll see.***
Went to the range a little while ago, FTF twice in 100 rounds. I think the buyer was exaggerating, but I still want to fix it. Hell, I like it myself. I think it may be the mag spring, watching it manually, I see that sometimes the round isnt high enough to be pushed by the slide. Reach in and tap the round and the back pops up a bit.But I had problems when the mag was fully loaded too, so there would have been more tension. Basically i should shut up because I dont know squat. 
|
|
You may be onto something with the mag spring, or it could be the mag itself. I really like my paras, just too damn big for carry.
So on my 14-45s, I tore down the mags, looked for any burrs/rough spots inside. Small file smoothed them out. Removed any burrs from the feed lips AND the plastic mag follower. Cleaned them and very lightly lubed them. You check the extractor yet? Too much tension is no bueno. And the mag springs need to be strong. A weak spring will cause your prob. They should be hard to load. Nature of the hi cap 45. You should need a mag loader to get the last couple rounds in. Edit...I have only had good luck with the para branded mags, but mine are all old, Canadian imports. They work great. Edit 2...I looked at my 14-45 ramps, they are unmolested, and look identical to yours. Wolff sells a +10% power mag spring for the paras, most of mine have those. |
"The true soldier fights not because he hates what is in front of him, but because he loves what is behind him."
G. K. Chesterton
G. K. Chesterton
|
On my 14-45 the follower was catching on the mag release hole not allowing the rounds to come up fully. It would behave just like what you are describing. Once I filed that edge of the follower down (on all my Para mags) I have not had a single issue with feeding or extracting in over 500 rounds!
I would try that before ordering new mags or springs. |
|
Mags (mag spring, followers, etc)
Ammo type, as in power. Not all ball ammo is the same power. Certain types of ammo have less power and maybe the recoil spring is "new" still... Sometimes a good cleaning and oiling/greasing is all that is needed.... With any FTF or FTE, I change ammo brands just to see. Next, I try a different mag. Next, I give it a good cleaning and lube, mag and weopon. I usually have silicon spray for the mags. Then I try different ammo again AFTER cleaning... I have run into situations, that the shape of the ball ammo could be a difference. Odd, but it can. I have a bunch of 38 Super pistols (one is a LDA 18-9 rebarreled, Taurus, EAA) and one brand of 38 Super ammo works better in my Mech Tech upper then the rest (and the rest of the ammo work great in the pistols). Go figure. |
"I believe in love. I believe in cancer... They are both diseases that need a cure."
WA
WA
|
Looks like you may have two problems, the recoil spring may not be set up correctly causing the round to hang up when feeding from the mag.
Also the internal extractor looks to be out of spec causing the rim to jam and not feed properly, maybe too many rounds single fed? First thing is to try a different magazine though. ETA - Does the last round lock the slide back? |
Why does Bad Luck seem to follow people who make bad decisions?